Turn off the power of airplane Mode?

Similar Questions

• S2415H, PSM, turn off the power indicator "pulsed"?

  Can I turn off the power in Active mode indicator, but it would also power off when it enters PSM (power saving mode). Very disturbing at night in the room. Any way to do it?

  That's how I've always used my monitors over the years. Mine have always done well after the warranty period of 3 years.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• My MacBook Pro with El Capitan 10.6.11 close the menu drop down. I have to turn off the power

  The closing down and options no longer work in El Capitan 10.6.11 restart on my MacBook Pro mid-2012. I have to press the power button to turn off.  When shutting down or restarting are selected, the Ribbon at the top of the screen disappears and Finder is no longer available but other aps on the bench of the accused are still available. When I restart after turning off the power, the system is back to normal until I need to close again.

  Hello

  Just in case, run disk utility.

  Open utility disk located in Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

  If disk utility indicates that the disc seems to be OK, you are finished. Otherwise, you must repair the disk.

• Satellite L20: Can I disconnect devices such as USB mouse without turning off the power?

  Hi all.
  I am owner of laptop Satellite L20. I always turned off power to my computer when I need to connect or disconnect a USB device. Some devices have a special icon on the toolbar disconnect them, but some don't (FDD USB or flash drives). Can I disconnect and connect devices such as mouse USB or Scanner wihtout turning off the power?

  Hello

  You can disconnect the external USB devices without turning off the unit, but you must use the option "remove hardware" before you cut the material.
  The icon "Remove hardware" usually appears with resources such as hard drives or USB key have the ability to buffer data. It of necessary for this buffer to the device before emptying it is disconnected

• LJ Pro300 color MFP M375nw. Power cycling, displays "49 service error - turn off the power, then press" on-screen.

  Bike constantly, the power display "49 service error - turn off the power, then press ' on-screen before stopping.
  For this printer only when it is connected to the network. Quite happy to sit quietly when printer NOT connected to the network.

  Unplug the network cable from the printer, check and clear all print queues (there may be a doc pdf sitting in a pc or server print queue)

  Once the queues have been dotted, restart the printer and reconnect the network cable.

  If this does not cure the problem, then the likely problem is a defective formatter Board.

  Good luck!

• Cisco router WIFI does not work after turning off the power

  I have a CISCO router that worked very well until someone turned off the power for a few minutes.  I tried to unplug the modem, the router and the laptop and waited a bit.  Then I turned on the modem, then the router, then my laptop but it is still not in communication with the modem.  I can use the modem with a hard connection to the laptop but need the WiFi as well as others can use it.  Help, please.

  You need to contact support with your Cisco router.  It looks like it might have been reset and the installation needs again.

• E 7520 HP All - In - One Printer: turn off the power to the wireless printer

  I have not printed for a few days I have not noticed if my Wi - Fi connection worked.

  I tried to print wireless today and got the error message that the printer was not connected to the internet.  I tried to go wrong, but it did not help.  I checked the connection to the wireless router and put the password in.  It has not yet recognized it.  I tried to disable printing for my smart phone (I think it is called), but the screen froze on the circle showing the progress.

  I tried to turn off the printer with the power button, but that no longer works.

  The Wi - Fi light just keeps blinking.

  How can I disable the printer may reset?  Or can you help get my printer to recognize my wireless again?

  Thank you.

  Hi Rhonda, there.

  I would suggest to unplug the power cord from the printer without turning it off with the switch, it will do a reset without getting rid of all the parameters. You simply leave unplugged for about 1-2 minutes to clear out any power.

  I recommend then reconnect, and doing as much as you can from the guide below:

  Printer keeps no connection Wi - Fi

  Good luck and let me know how it goes

• During "shut down", I accidentally turned off the power strip to the desktop before to close the process finished. This is a problem.

  Since this event, start working normally, but after about 5 minutes the PC will 'freeze' and nothing works.  Even the stop the clock!  I can start and run the PC in safe MODE without any problem, even Shut Down works.  But, in normal mode, if I click "Shut Down", before the 5-minute 'freeze' occurs, the PC hang in the process of closing and never closed and turns off.

  In Safe Mode, I turned off a number of pilots to start, but it did not help.

  I studied 'system restore', but there is NO "restore points".

  Help, please.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• BlackBerry Smartphones turn off the light in night mode

  Hello

  Night light of my BB 9700 (OS 6) turns off when it is in mode.

  How can you do with the BB Curve 9380 (OS 7.1)?

  Thank you for your attention.

  Kind regards

  Hello and welcome to the community!

  In fact, the judgment was, I recall, a bug. It was supposed to work in the screen remained mode bedside... otherwise, it is not useful as a bedside clock. Therefore, I would say that your 9700 has a level of operating system with the bug, and your 9380 is WAD - works as expected.

  Good luck!

• Turn off the power limit Ad Tracking?

  Hello! I have a problem with the feature "search ad limit. The cursor is gray and will not let me turn off, saying that I have less than 18 years when I'm not. I've already changed to 'allow changes' restrictions and I don't know if I have apps which force advertising, tracking, and I don't know how to fix this, if this is the case. Help, please! I need this setting off to access certain applications of mine! I am also on a personal Apple ID.

  Turn off wifi and cellular data, then click on the button of advertising in privacy and turn off the announcement of limit button

• My iPad has been verification of operating system update for more than 3 hours.  Not able to do anything. Cannot cancel or turn off the power. Help please.

  MY iPad has been verification of update of the new version of operating system for 3 hours.  Unable on camel back or cut off the power supply.  What should I do? o

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears.

  Then go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• Satellite X 200-203 turns off when turn off the power

  Hello

  first of all, excuse my bad English please.

  Since 2 days I have the satellite X 200-203 portable and my first problem is that the battery does not load.
  When I connect the power he works very well, but did I unplug the power replisse or the laptop turns off. under vista it shows me always a 89% battery power, ALWAYS.

  What can I do?
  at least, the satellite logo lights up red annymore.

  Thank you

  Hello

  According to your description, the battery provides the laptop with power.
  In my opinion there is problem with the battery itself or electronic supply on the motherboard.
  I think that it of a failure of battery, but to be 100% sure that the audit of the books is necessary!

  The X 200 is a new series of laptop so I'm 100% sure that the guarantee is valid. Am I wrong?

  If you shouldn't t waste time and contact the service provider authorized in your country.
  The guys of the explain your situation and ask for later handling.

  Each cheque replacement and part is done for free!

  Good luck & congratulations guy ;)

• Satellite A100 - turns off the power after 60 seconds

  After pressing the power button, the laptop starts but 60 seconds from the moment it is activated, the it turns off suddenly?

  The fan turns, I tried cutting dvd, wireless, modem, ram, hard drive, it opens and clean all the dust. It turns off after 60 seconds exactly every time

  Any ideas?

  Thank you
  Ben

  Hello

  > and clean any dust
  How did you do that?
  Usually, you can use jet of compressed air to clean the laptop and remove the dust that blocks the fan. That is why it s not necessary to disassemble the laptop as you can read here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  And the same thing happens if you access the BIOS instead of starting in Windows?

• When I start my computer, I connect by entering my password but the screen shows just the loading circle until I have turn off the power and turn the computer back on

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  Wen I turn on, I can point to enter my password. I entered my password and the screen displays a symbol of shooting and seems to expect something to go. The mouse does not work and none of the keys work. I have WIFI in my house, but the system looks like it's waiting to connect. I waited for more than 10 minutes. The only thing I can do is press and hold the switch down for a few seconds until there is a power down. I then power back up and get my password again. I between it and the system is in place OK. It happens all the time. It all started about 2 weeks ago. I have not loaded all the apps since it worked normally. Also, if I am growing up and running and I doi a stop with a reboot, the system comes down and restarts and arrives at the passwword. Enter the password and I have hung up again.

  Hi Greg,.

  ·         Have you checked the problem in safe mode?

  ·         What version of Windows operating system is installed on the computer?

  Try the following.

  Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.

  Start your computer in safe mode

  Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety