BigPond use gadget update failed

Similar Questions

• Updates fail to download using Windows Update

  I am running Windows XP Professional Sp3 and when you use Windows Update its identifies I need 88 critical updates. I confirm that I am reuqire to install but they constantly fail to download.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on this machine?

  3. do you have a Norton or a trial of free McAfee come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Whenever I try to use Windows Update, updates, most will fail and that the last time, I received this error code: error 80070664. I am running Windows Vista

  When you try to use Windows Update, the majority of the updates fails.  I get the error code 80070664.  I am running Windows Vista.

  Hi AirbnDoc,

  I suggest that run you the Fix It Tool to solve your problem. Here is the link to use it Fix Tool:

  http://support.Microsoft.com/kb/971058/en-us

  I suggest you to select two updates at once and the installation, if you are prompted to restart, then restart the computer.

  Disable all security software before installing the updates.

  Once installed, updates allow security software.

  Hope this has been helpful.

  Kind regards

  Bharath
  Microsoft technical support

• Windows updates fails, get "Error 1327 Invalid Drive/M" error when trying to install updates by using the stand-alone packages.

  Original title: I deleted the files from automatic update and windows update keeps trying to install

  I've done an update for a long time on an old computer unused spare XP and Windows Update said that he had to update a large number of files, so I have left to download and install.  Once the 45 updates completed, I rebooted as instructed and proceeded to clean a lot of old data.  Apparently I deleted (7) files for Office M/S that must be installed, because the Winows Update icon in the status bar telling me I had 7 sto update to install.

  Now Win Update always tells me that the files should be updated and starts the process, telling me that they are already downloaded, but it fails every time because they are not where they should be, as I deleted them without meaning to.  How can I do the update for these startup files, or where can I get the appropriate files to allow the update work properly?

  Yes, I know it was stupid, but this is the frist time that I asked for help from Windows 3.1, so I don't feel too bad.

  I have download the individual Ko * .exe files support, but get an error 1327 Invalid drive / M error whenever I try to install one of them.

  Thank you

  Paul

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  Have you ever used registry cleaners?

  Notes in my old an assignment by Peter Foldes (long ago)-

  '0 x 80070643 error '.

  Use the following fix below. Please post back with results

  subkeys to rename 1 Office

  Note: Remove the following registry keys may reset customized user
  settings for your Microsoft Office programs.

  1. close all applications.
  2. click on start-> run, type regedit, and click OK.
  3. Locate and select the following registry subkeys:

  HKEY_CURRENT_USER\Software\Microsoft\Office\11.0
  HKEY_LOCAL_MACHINE\Software\Microsoft\Office\11.0

  4. right click on 11.0 and rename them in Old11.
  5. close the registry editor.

  2. detect and repair Office 2003

  1. on the Windows taskbar, click Start, point and click Control Panel.
  2. double-click on Add/Remove programs.
  3. click on change/remove programs in the left pane.
  4. Select Microsoft Office Professional Edition 2003 in the right pane, and then click on edit.
  5. Insert the correct CD version when she needs.
  6. Select "Reinstall and repair" and click Next.
  7. Select "detect and repair errors in my Office installation".
  8. click on install and wait for the process to end.

  3. install the updates
  --
  Peter '.

• Cannot use Windows Update - KB982132 and KB972270 fail to install, error 0x800A0007

  I can't using Windows Update for two 'critical updates of security". I got anumber of error messages, but the last was 0x800A0007. This is nowhere on their support pages. Can someone suggest a possible solution?  (If I can solve this problem, I can get IE9 fixing.) With the help of Windows XP Edition family

  The two KB982132 and KB972270 updates failed to install (twice) with error message that appears now is no longer on the 0x8007001F support page.

  Since that time when I get to "check your computer for Updates" page fails to display and code error 0x800A0007, which also appears nowhere.

  Norton Internet Security Firewall is disabled and the Windows Firewall is enabled.

  Thank you-

  Do not uninstall IE8 or IE7 before doing a repair installation leaves the two Internet Explorer and Windows in a "confused" or "broken" State - so your Windows Update (if any) problems.

  I'm sorry to tell you that your only recourse now formats the hard drive & then by doing a new installation of Windows. [1]

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  =======================================================
  [1] PS: I learned that the hard way, too, many years ago!

• Service Pack 3 update fails error file ntkrnlpa.exe is open or in use by another program

  Original title: Service Pack 3 update fails

  I'm trying to update windows xp with service pack 3. I have download the update. When I try to install, the update fails with an error message"
  "File ntkrnlpa.exe is open or in use by another program", when no programs are running... Why?, he said.

  My stops to update SP3 and I cannot resolve the error message, how can I fix it?

  Hello
  Try the methods provided below and check if the problem persists.
  Method 1:
  This problem may occur if some third party software interferes with the installation of Windows XP SP3.
  Click on the link provided below for more information on how to set up your computer in a clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  (a) click Start and then click Run.
  (b) type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK. When you are prompted, click on restart to restart the computer.
   
  Method 2:
  
  Download the update manually, and then install it.
   
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  
  http://www.Microsoft.com/download/en/details.aspx?ID=24
  See also:
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   

• using the player for years, this new version available message, choose update, update failed. current version now does not, uninstalled attempted to load the new version of the download site. Download did not say the latest version already exists but is n

  IV ' e use player for years. received message new version available. has chosen the update failed. current version does not now. Drive not installed. I tried downloading newer version of site download failed saying existed, but it doesn't. Help?

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Update failed... could not be installed (applies the patch failed)-I use 7.0.1

  Update failed. The update could not be installed (patch applies failed). He seems to want to upgrade 7.0.1 to 8. But when I click on the link, it does not offer updates, just all a band/reinstall! Where is the page of updates? Help?

  You can try the alternative and easier way by downloading here

  • getfirefox.com

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• iOS 10 update failed iPhone 6 now frozen on the Logo screen

  I connected my iPhone 6 (he was stuck in endless loop Recovery Mode with closed force) to iTunes and tried to update to iOS 10. After about 20 minutes, the update failed. Now my phone is frozen on the Logo screen with the loading of updated under him bar. Force restart it brings back me to the screen in recovery mode.

  I also tried to use another cord, restarted my computer, update iTunes... nothing seems to work. I tried this several times in the last 36 hours with ZERO luck.

  MY camera got in as recovery mode well once completed the download of ios 10 on itunes.

  I had to unplug my phone and plug it in again... Make sure that all drivers are up-to-date. attention to any message of warning or error code filling on your itunes.

  ITunes and the computer must be updated. the cable must be the original.

  Although I made a backup, recovery mode was not something I wanted. It worked for me, once I followed this step.

  Install the latest version of iTunes. (12.5.1.21)

  1. Restart your computer.
  2. Automatically search for updates of your Mac or PC. If you restart your computer for an update, check the updates again after the reboot.
  3. Strength of your unit to restart. ()When you see the option restore or update, choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device. If the download takes more than 15 minutes and the device out of recovery mode, let the download is finished, then repeat these steps.)

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch - Apple Support

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Updates failed after the new HD install

  I live in South Africa and use a MacBook Pro bought in the USA by the end of 2014. When I had to replace the HD in December 2015 the company is certified local Apple had to order the HD of the USA. After installing it, they restored my software and data files and mails in Mail.

  Since the replacement of HD that I was not able to install updates because after that I give permission to update, I get a notice that no update is available under "this Apple ID" or something to that effect. After 8 months of updates failed my HD is slow again with my computer freezing temporarily and the color wheel - wait please turn from time to time. What should I do to allow updates succeed?

  It seems that an another Apple ID that yours has been used when the HD has been replaced.

  -Backup your data on an external drive

  -Start the recovery of the Internet

  On OS X Recovery - Apple Support

  by pressing Command + Option + R at the start of the OS X Internet Recovery*.

  If start you only on the recovery partition, you may have same problem

  then format the boot disk and install OSX. During the installation of recovery of the Internet, the version of Mac OS x installed is what came initially with the Mac. For example, you may need to update/upgrade via the Mac App Store

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• TB update fails and I get an error of access denied to 7 - Zip when you download a new version.

  Thunderbird was not able to update from version 24.6.0 (under Windows 7). Whenever I try to auto update, it tells me that the update fails. When I let the updater download a full version, which also fails. When I try to download a new version manually, during the extraction process, I get an error message indicating "7-Zip" up and "Access denied" in the window. I followed all the suggestions to the support download error page (as an administrator, stop the process of Thunderbird, etc.), and none of them solved the problem. Any other ideas?

  What firewall / anti-virus software you are using. My guess is that the firewall or the anti virus software blocks both the update and full installation because it contains ZIP files. I have not heard that outside the paranoid company / parameters of business in the past, but there's always a first time.

• Firefox 31 update fails

  There is nothing different, but FF started again and the update succeeded. This is after more than a dozen attempts.

  Automatic update fails, but gives no reason. Tried a manual update (Firefox Setup 31.0.exe) and it does not work? I tried running in administrator mode and nothing seems to happen (?) ...

  When I click on '?' (help) / about and the updated... application message continues to turn and run for a LONG time, and then prompt to restart. I do, and you receive error message that the partial update cannot be applied... He will try an update complete. It loads and executes the full update and then displays a message "update Application" without end. After several minutes of nothing happens, I x'd out and I'm still on exit 30, with the message to reboot again.

  Running Windows 8.1

  To date, Firefox continues to the failure of the upgrade to version 31. I'll try to manually disable all my Add-ons and see if that helps. Well, it did work.

  Tried running FF in "safe mode"... It also did not work.

  I noticed that when asked to "restart FF", the tabs looked a little weird... square is the only way to describe it. The upper right minimize output window icons were also "cut in half". Very weird.

  Another problem. In my download directory, I have now three executable files that I can NOT REMOVE. Says they are in use by another program. Looked at the running processes to all and do not plant anything that it is focused on running FF. Tried rebooting the PC did not run FF and still cannot delete
  The installer of Firefox 31.0.exe
  Firefox Setup Stub 31.0.exe
  Firefox_Setup_31.0.exe (this installer downloaded from cnet).

  From now I use Chrome since I don't know what is happening with FF. I'll check back every day to see if there is a solution. I have not tried to uninstall FF and then re - install. I understand that I should be able to save all my settings, so I could try in a week if I don't see a solution.

  Do not know how to 'close' my problem, so I answer to myself. Updated at 31 and next. Don't know why, but my problem was apparently solved.

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• update failed opinion said: something is trying to trick firefox by accepting a security update. Please, contact your network provider and ask for help. help please

  What is the solution to this issue - is there one that will not make my eyes roll back in my head? What is a true message from Firefox?

  the popup looks like this:

  [firefix logo] Software update

  Update failed

  Something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help

  Whenever you get a message / popup that software / files must be updated.
  
  DO NOT USE ONE OF THE LINKS PROVIDED.
  
  If this can be a legitimate message, could also be a Virus or Malware.
  No matter when you want or need to check updates.
  Go to the website of the real owner of the program in question.
  For example, for Firefox, go to Mozilla.org
  or Firefox in any language.