Billing data repeat address after a page break

Similar Questions

• table header is empty after a page break

  Hello

  I have a table and fill it with an XML file.

  The cells in the header row are text fields (not text objects). The data of the table header also comes from the XML file.

  After a page break, I get a line of header at the top of each page, which is good. However, the fields are empty. The fields are filled only in the line to the first page header.

  Is it possible to have all the row header filled fields?

  (I even tried to have text objects in the header line and fill in an event formReady. "But once again on the next page they are filled with the initial value of the text object - and not the value of an XML file.)

  Make each of these fields of Global header... in other words the overall value their relationship.

• "Space before" paragraph after a Page break

  Hello

  Here's what I see: the parameter 'space before' to paragraph styles is ignored if the paragraph is placed after a page break or a disconnected page. How can I force InDesign to honor my setting "space before"?

  I give you an example: I created a paragraph style called "headline." I applied this style for the section headings and the title of the index. I want to reduce "Headline" a few centimeters from the top of the page, but my "space before" the parameter is ignored. What should do?

  Use leading instead of forward space and set the first base line

  of your text for 'leader' frames

  Substances

• How to prevent the gap after a page break?

  Hello

  When you try to add a page break between the linked pages, I have an annoying problem where the space is added at the top of the new page (see attached screenshot).

  I do not have 'space before' or 'space after' set on the paragraph style where the page break is applied, if it's not that.

  Thank you!

  

  Looks like you used an empty paragraph as a spacer. With the help of the space before or after the space instead of empty paragraphs will prevent the empty space at the top of a column.

• Extra blank line inserted after the page break

  Hello
  
  I currently have problems with alignment using templates in BI Publisher.
  I am trying to create a model that will print on a pre-printed form.
  Each group in the State should be separated by page, so the Group has a <? split-of-page-break:? > before <? end-for-each? >.
  However, when the next page begins, there is a blank line inserted. This messes up the alignment in total.
  
  Code looks like this:
  <? for-each-group: G_Document; / DOCUMENT? > <? sorting: current-group () / DOCUMENT; ' ascending '; data-type = "text"? > <? for - each:current-group()? >
  -INSERT table MODEL HERE-
  <? split-of-page-break:? > <? end-for-each? >
  
  Output is like this:
  
  (Page1) < TABLE MODEL >
  Jump to Page <>
  (Page 2) < new line >
  < TABLE MODEL >
  Jump to Page <>
  (Page 3) < new line >
  < TABLE MODEL >
  Jump to Page <>
  ...
  
  I found this old thread Split-of-Page-Break insert extra line that has exactly the same problem, however, I tried all the proposed solutions, even the last one, and I still have the problem.
  Any help would be greatly appreciated.
  
  Kind regards
  Jovee

  If your issue is resolved can you please close the message and give me a few points.

• Paragraph style of change after a Page break

  I'm completely new script, so I take what I found others and try to change it.

  What I'm trying to do is to edit a paragraph style that follows a page break symbol.  I have a script (below) that will change a paragraph style following a paragraph already predetermined style, so I guess it's done the same?

  Thank you!

  Changes after "category A" paragraph to "body text":

  app.findTextPreferences = null;

  app.findTextPreferences.appliedParagraphStyle = "topic A";

  var myResults = app.activeDocument.findText ();

  for (i = 0; i < myResults.length; i ++)

  .appliedParagraphS myResults [i].parentStory.paragraphs.nextItem tyle (myResults [i] .paragraphs [0]) = 'body text ';

  Hello

  Try this:

  ------

  app.findTextPreferences = null;

  app.findTextPreferences.findWhat = "^ P";

  var myResults = app.activeDocument.findText ();

  for (i = 0; i

  myResults [i].parentStory.paragraphs.nextItem (myResults [i] .paragraphs [0]) .appliedParagraphStyle = app.activeDocument.paragraphStyles.item ("text body");

  ------

  and check if your next "page break" para is not a blank line.

  Rgds

• Reading messages: when we say page 6 after reading page breaks 1

  Hello!

  A simple question - I think at least: I have not checked the forum for a few weeks, so I read the messages and return to the next page and read. And after reading I always go back to page 1, even if the message I read was on page 6.

  What is the problem with my clicking or Adobe click in this funny way?

  Alexander

  It is an also the forum software Adobe bought last spring.  Workaround: right click on the message you want to read and do open in a new tab.  That will keep your place at the table of contents (and you won't have to wait for the table of contents refresh after you close a message).

• Correct use of the page-break-after

  Hello

  I don't know that it is a simple question for you.

  I have LONG pages of stuff on the web for people to print, and I wish they were able to print in a very specific way-

  I want to decide when the page "breaks".

  On the web, I saw simple HTML, but also JAVASCRIPT solutions - and I like to keep the solution as simple as possible.

  On this forum, there are a few discussions of pagebreak, but no simple and final solution.

  In your opinion, does the following work?

  < html >

  < head >

  < style >

  {.breakhere}

  page-break-after: always ;}

  < / style >

  < body >

  Page 1

  Page 1

  Page 1

  Page 1

  Page 1

  Page 1

  Page 1

  Page 1

  < div style = "breakhere" > < / div >

  Page 2

  Page 2

  Page 2

  Page 2

  Page 2

  Page 2

  Page 2

  Page 2

  < div style = "breakhere" > < / div >

  Page3

  Page3

  .

  .

  .

  < / body >

  < / html >

  Have a look here http://css-discuss.incutio.com/wiki/Print_Stylesheets

  However, the best solution for printing, is to use a PDF file, what they are for. Create a PDF file containing the same data. You have total control over the printing format in this case. Have a look here http://www.fpdf.org/

• During the typing of text after paragraph 4, the text jumps the same block of text there. Not sure if it's because of a page break. Help, please

  During the typing of text after paragraph 4, the text jumps the same block of text there. Not sure if it's because of a page break. Help, please

  And make sure that you do not use the Enter key on the numeric keypad.

• Repeating text field do not break across pages

  Hey everybody,

  I have a text field multiline, expandable that will have many pages of content. My issue is that it won't break on several pages. It is not the first thing on the page, and when it's big enough, instead of split into a new page, it moves the field of full-text to the top of the next page. Not only that, but if it has more than one page of content, the text field spans the footer (from master page...) and disappears off the end of the page, without adding more pages to display the rest of the content.

  I checked the usual suspects:

  -The text field is set to allow content page breaks

  -All subforms parent of the text field allows content page breaks

  -There is no set "keep withs."

  -The form is permanently saved in dynamic PDF.

  Any ideas on where I could have gone wrong? Thanks for any help you might be able to offer,

  -Scott

  Hello

  are the surrounding subforms on fluids?

  The text field breaks in a positioned layout.

• Page after the table break

  Hello.  I have a problem with the page breaks in a document that I write.  I called 3 paragraphs that include nothing more than a table (this is a list of parameters with descriptions).  This section is followed by another 3 topic that usually has only a line or two (the value returned by the function).  Whenever the parameter with its table section comes towards the end of the page, so there is no place for the declaration of value on the same page section, Framemaker bumps the two sections on the next page.  I can't understand how to get Framemaker to keep the settings on page 1 while putting in return value page 2 other that force a page break or put in a line empty before the declaration of value section.  Any ideas?

  Hey, thanks.  It's 'Keep with next IMF' who got pipe upwards.  If I uncheck that, my settings section can be separated from my section of declaration of value.  Problem solved.

• The value "allow Page Break in content" during the execution

  Hello

  Some can help me setting the subform/table property "Allow Page Break in content" with javascript? I have a repeating table in a form and want only long tables to break after a certain height. Simple question but I guess that the answer is not. Cannot find anything whatsoever after searching for several days.

  Thank you

  Arvind

  Hi Arvind,

  I don't think you can set the page break in content 'allow' with JavaScript.  If you set allow a page break in the content on your table, and then you could add a subform that causes a page if the table is small enough to fit on the next page.

  You'd have to do in the event layout ready and update form in the ready layout structure can cause that it become desensitized because it weakens the event fires again.  This means that you must be careful to remember what caused the event.

  In any case, here is an example that should help you get started.  https://sites.Google.com/site/livecycledesignercookbooks/home/ForcePageThrow.PDF?attredire cts = 0 & d = 1

  Take a look at the layout event code: loan Subform1.

  Concerning

  Bruce

• Page break in RTF model

  Hello
  
  I have to solve some problems in a model RTF for the invoice report developed by someone else.
  The preview works fine with a page break correct for each invoice, but when the model is uploaded to the publication server Oracle XML report output is not the right page break.
  In this case, the new Bill begins in the middle of the page.
  
  Also the I do not understand how the page break works in preview, even when there is no code for the page break on the template (like <? split-of-page-break:? >)
  
  Please help me solve the problem.
  
  Thank you
  Yogi
  
  Published by: Yogi on January 25, 2013 11:45

  xml is generated data for the input you have given. the error is because if the generated XML has no data and you don't manage any data found in your model you will get this kind of error.

  try to attach the old model and example of model i gave and click view output for both models and see that you receive same error?

• How to put a page break when value changes

  Hi, I am very new to BI Publisher. I realize, it is something very SIMPLE, but I can't find a CLEAR answer.
  
  I have a set of data that I have a repeating group for my RTF model and it works fine. But I want to have a page break every time that one of the changes in the values and I can't figure out how.
  
  Here is the XML
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  <! - generated by the Oracle version 6.0.8.28.0 reports - >
  < PIR05 >
  < LIST_G_ITEM_NO >
  < G_ITEM_NO >
  < PAGE_NO > 0 < / PAGE_NO >
  < ITEM_NO > 4242301 < / ITEM_NO >
  < ITEM_DESC1 > 13MM Aries Cell Assembly < / ITEM_DESC1 >
  < LOT_NO > 123 < / LOT_NO >
  < LOT_DESC > 4242301 < / LOT_DESC >
  < SUBLOT_NO / >
  2IRE < LOCATION > < / LOCATION >
  < GRADE_CODE > NO < / GRADE_CODE >
  < ITEM_UM > each < / ITEM_UM >
  < ITEM_UM2 / >
  < > 614 LINE_NO < / LINE_NO >
  < COUNT_NO > 614 < / COUNT_NO >
  < P_ITEMUM2LABEL / >
  < P_ITEMUM2DASH / >
  < F_ITEMUM2 > 1 < / F_ITEMUM2 >
  < P_CSITEMUM2_LABEL / >
  < P_CSITEMUM2_DASH / >
  < / G_ITEM_NO >
  -< G_ITEM_NO >
  < PAGE_NO > 0 < / PAGE_NO >
  < ITEM_NO > 4242301 < / ITEM_NO >
  < ITEM_DESC1 > 13MM Aries Cell Assembly < / ITEM_DESC1 >
  < LOT_NO > 1232 < / LOT_NO >
  < LOT_DESC > 4242301 < / LOT_DESC >
  < SUBLOT_NO / >
  2IRE < LOCATION > < / LOCATION >
  < GRADE_CODE > NO < / GRADE_CODE >
  < ITEM_UM > each < / ITEM_UM >
  < ITEM_UM2 / >
  < > 615 LINE_NO < / LINE_NO >
  < COUNT_NO > 615 < / COUNT_NO >
  < P_ITEMUM2LABEL / >
  < P_ITEMUM2DASH / >
  < F_ITEMUM2 > 1 < / F_ITEMUM2 >
  < P_CSITEMUM2_LABEL / >
  < P_CSITEMUM2_DASH / >
  < / G_ITEM_NO >
  ...
  < G_ITEM_NO >
  < PAGE_NO > 0 < / PAGE_NO >
  < ITEM_NO > 4242301 < / ITEM_NO >
  < ITEM_DESC1 > 13MM Aries Cell Assembly < / ITEM_DESC1 >
  < LOT_NO > 562354 < / LOT_NO >
  < LOT_DESC > 4242301 < / LOT_DESC >
  < SUBLOT_NO / >
  RECV WOR < LOCATION > < / LOCATION >
  < GRADE_CODE > NO < / GRADE_CODE >
  < ITEM_UM > each < / ITEM_UM >
  < ITEM_UM2 / >
  < > 603 LINE_NO < / LINE_NO >
  < COUNT_NO > 603 < / COUNT_NO >
  < P_ITEMUM2LABEL / >
  < P_ITEMUM2DASH / >
  < F_ITEMUM2 > 1 < / F_ITEMUM2 >
  < P_CSITEMUM2_LABEL / >
  < P_CSITEMUM2_DASH / >
  < / G_ITEM_NO >
  < / LIST_G_ITEM_NO >
  < WHSE_DESC > OPM INVENTORY ORG < / WHSE_DESC >
  < CS_NODATA > 617 < / CS_NODATA >
  < CYCLE_NO > 000000014 < / CYCLE_NO >
  < / PIR05 >
  
  I want the g_item_no (repeating group) to have a page break every time LOCATION changes.

  You can declare two variables to contain the previous and current POSITION values and break the page when it is different.

  Or just before your end-for-each, copy the following code.
  page

  To ensure that his place in a form field.

  This will be a page break when changes of LOCATION.

• 2 columns with the correct page breaks

  Hello

  I am producing a presentation of 2 columns in my form.

  The problem is: these columns span several pages and I can't right page breaks.

  I have a provision passed with two adjacent subforms that make my columns. In these column subforms I fill out a lot of data from XML.

  Problem 1: I get bored about 5 rows at the end of the page. They disappear into the page break.

  Problem 2: my second column starts to fill up on the second page (which is be the page where the first column ends).

  I also tried with a single table with exactly one line. But it disappear all lines after the first page and I get empty pages instead.

  Has anyone ever encountered this problem?

  What is a good way to build dynamic forms of 2 columns?

  Ulrich

  You will not be able to move beyond a page, then return to the previous page... .the data must be split so that the complete presentation of a page should occur before moving on to the next page.

  You can't go back in the time layout a page is complete... Sorry he just can't do that.

  Paul