Bing - delivers with the watch list.

Similar Questions

• You can swim or shower with the watch

  You can swim or shower with the watch?

  Hello

  Non - Apple advises that you perform one of the people.

  Apple Watch is splash and resistant to water, but it is not waterproof. You can, for example, wear and use Apple Watch during the year, in the rain and all washing their hands. Overwhelming Apple Watch, however, is not recommended. The watch must also be dry if it is wet.

  Apple advises specifically, for example, the following can affect Apple Watch water resistance and should be avoided:

  • Exposing Apple Watch into water under pressure, including under the shower.
  • Swim or bathe with Apple Watch.
  • Overwhelming Apple Watch in water for long periods of time.
  • Apple Watch port in the sauna or the hammam room.

  Water resistance is not a permanent state, and Apple Watch cannot be rechecked or closed for resistance to water.

  More information:

  On the resistance to water Apple Watch - Apple Support

• Hi I have a new Apple Watch - sport Strip. Is it possible to buy separately strips that can be used with the watch?

  Hi I got a new Apple Watch as a gift at Christmas - sport band, white, 42 mm. 7000 series. Since this is my first Apple Watch, I wonder if I should check all options at the store before opening the box. Is it possible to buy separately strips that can be used with the watch?  Thank you, in advance, for any advice, guidance, you can offer the wisdom.

  Hi, Kate

  Yes - any band Apple Watch 42 mm fits your Apple Watch.

  Non-Sport bands have different lengths, then check the circumference of your wrist and see Apple Watch Sizing Guide (that compares all the Apple strips) before you buy separate bands:

  http://www.Apple.com/shop/watch/Sizing-Guide

  Try them in an Apple Store, it's also a great option.

  The Sport of Apple Watch also has an anodized aluminum housing, while the non-sport bands have different metals of cards and/or links (this does not affect the compatibility, only appearance).

  Information on how to pass the tapes: change your Apple Watch band - Apple Support

• With the watch Nike +.

  With the new Applewatch Nike +, only get you exclusive Nike watch faces or the options watch face?

  Hello

  Apple Watch Nike + includes also all the faces of standard Watch Apple Watch.

• AppleTV pairs with the watch but subsequently does not appear in the application of the watch.

  I have 2 AppleTV, a connected by wifi, domestic one on the LAN by ethernet.  Those on ethernet not showed as a selection on the application of the monitoring, so I "added feature" on the application Remote, the Apple Watch appeared in the matching section of the AppleTV remote and was easily matched.

  But even if the AppleTV can see the watch for matching it still does not offer as one of the selections, just connected wifi AppleTV and my iTunes home sharing.

  Just rebooted, removed and re-paired the watch with the ethernet connected AppleTV and still it is not offered as an option in the Remote app.

  How could he be watch for matching and not for actual use?

  Hi Bob

  Guidelines for the use of Apple Watch as a remote for Apple TV Apple inform that this is possible when the devices are connected to the same Wi-Fi network:

  "You can use Apple Watch as a remote control for your Apple TV, when you are connected to the same Wi - Fi network."

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• change the results of the report with the selection list using dynamic action

  This is one of those situations where if I could understand the appropriate search terms to use, someone else must have asked this question in the past.
  
  I have a report with a SQL query with a condition based on a list of selection on the same page. So I have a list of selection -: P177_FISCAL_YEAR
  
  My request for my report is:
  
  Select md_id, display_name, description
  of media_tbl
  where fiscal_year =: P177_FISCAL_YEAR
  
  When a person makes a selection on the selection list (: P177_FISCAL_YEAR), I would like to report up-to-date without having to submit the page. I was hoping that I could do something like this using a dynamic action but have not found a way to do it.
  
  Thanks in advance!
  
  John

  Create dynamic Action:

  When
  Event: change
  Selection type: product (s)
  Article (s): P177_FISCAL_YEAR
  Condition: - unconditionally.

  Real Actions (add 2 real actions)
  -the first is to load the value in session state so that the report can see.
  Sequence: 5
  Action: execute the PL/SQL Code
  Code PL/SQL: null;
  Items to submit page: P177_FISCAL_YEAR

  -the second to refresh the report
  Sequence: 10
  Action: Discount
  Selection type: region
  Region:

• Problem with the selection list dynamic LOV using bind variables

  I have the following SQL to fill a selection list:
  
  Select d, ch from
  (
  Select ft. FAMT_NAME d, pi. R FAM_ID_T of FAMILY_TRA ft
  Join the ck list
  on ck.family = ft.famt_name and ck.newseq in (: NEWSEQ_QUERY_SQL)
  )
  
  Where NEWSEQ_QUERY_SQL is a part of the application that is defined by a calculation of page and essentially returns a list of values NEWSEQ based on some parameters of the user query. For example:
  
  Select distinct (ck.newseq) in the ck list where rownum < 20
  
  The query above works fine with SQL Developer and returns two columns needed (display_value, return_value)
  
  However, it returns no line, when it is used to fill the LOV to a selection list.
  
  If I replace the: NEWSEQ_QUERY_SQL with a list of NEWSEQ hard-coded, it works:
  
  Select d, ch from to)
  Select ft. FAMT_NAME d, pi. FAM_ID_T r
  of FAMILY_TRA ft join checklist ck on (ck.family = ft.famt_name and ck.newseq in ('K0242900', 'K0217200'))
  ) ;
  
  I can even replace: NEWSEQ_QUERY_SQL with hard-coded SQL and it works:
  
  Select d, ch from
  (
  Select ft. FAMT_NAME d, pi. R FAM_ID_T of FAMILY_TRA ft
  Join the ck list
  on (ck.family = ft.famt_name and ck.newseq in (select ck.newseq from the list ck where rownum < 20))
  )
  
  But if there is a connection variable (: NEWSEQ_QUERY_SQL), it doesn't.
  
  Selection lists are driving me crazy! They seem incredibly capricious.

  Hello:

  You cannot link a "sql statement" that bind the value you're trying to do.
  P2_FAMILY_LIST must be the SQL statement you executed for the LOV. Something like

  select d, r from
  (
  select ft.FAMT_NAME d, ft.FAM_ID_T r from FAMILY_TRA ft
  join checklist ck
  on (ck.family = ft.famt_name and ck.newseq in (select ck.newseq from checklist ck where rownum < 20))
  )
  

  CITY

• Apple Watch sport does not work correctly. The display is 'crazy' once or twice a week and I need to force restart it. Do you know what is happening with the watch? Is this a common failure?

  Apple Watch isn't working properly. The display is to be 'crazy' once or twice a week. And I need to force restart it. Is this a common failure?

  Hello

  This isn't a failure or defect.

  Zoom (an accessibility function) has been activated on your watch and you are zoomed accidentally tapping on the screen in a particular way.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• Problem with the folder list

  Hello

  I try to use the folder list to the list of all the files in the folder of LVM. However, I get this error message when I run the VI.

  I tried to key in the pattern such as *.lvm or even using the loop, still do this out of the error message. Please help me.

  See you soon

  PX

  

  Hi PX.

  I guess you must enter a folder instead of a path of the file LVM.

  Hope this helps,

  Mavis

• I need help with the updates listed below

  I tried several times to install updates as follows: KB 2468871 KB 2533523 for my Vista SP2 program with a 32-bit and I get the error message 643 / I use Chrome most of the time, but I also have IE.

  You're certainly not alone...

  You can try to repair the .NET Framework 4 and if that doesn't work, download updates relevant manually and install the same.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  ·         Click on start/Orb and click on Control Panel.

  ·         Go to the program and features.

  ·         Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.

  ·         You should have the choice to repair or uninstall/change, click it.

  ·         This will then give you the opportunity to fix it

  ·         Select the repair option.

  Manual download of updates (just search for the most relevant to your problem)

  1. http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27017 (KB2539636)
  2. http://www.microsoft.com/download/en/details.aspx?id=3556 (KB2468871)
  3. http://www.microsoft.com/download/en/details.aspx?id=27014 (KB2533523)

  Make sure you download the one appropriate for your system.

  http://support.Microsoft.com/kb/827218

  Install as administrator.

  Addition, it is rather a big discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-update-fails-to-install-updates-kb2539636/039d7c34-5e25-4cbe-bc47-e0620a6d5b7e

• How to move grid in a region with the selection list, dates selector and buttons?

  Hello

  I'm on Apex 4.2.4 and using the theme 25.

  Most of the time the reactive model is great when you want to align things. But in this case, I want just the displayed items from left to right.

  I have the setting on the top bar and I want the elements all in one line.

  [Date Picker] [30 days] [60 days] [90 days] [Site selection list]

  The date picker is so that they can choose a specific date and the three buttons are there to make the date of the report to jump to sysdate + 30, 60 or 90. And the list of location selection, is that they can specify the type of report.

  I can't get them to single-line layout. I tried several different combination, including the specification of the column and the extent of column. And none of them does not seem to work.

  Apex login

  workspace: bulbcharts

  user: guestdev

  password: graphics

  ID of the App: 73911

  Page: 1

  TC-army wrote:

  Is there a way to disable just grate inside this one region? I just want to bring to the left of the battery (float). But the grid is not able to handle this.

  Could not drop.  Credit for going to this thread:

  https://community.Oracle.com/message/10914920#10914920

  Here's a demo which I believe meets your needs:

  https://Apex.Oracle.com/pls/OTN/f?p=61859:1

  Jeff

• Problem with the playback list in Safari 10.0

  I upgraded to Safari 10.0 and can no longer remove items from the playlist.  The small x in the upper right corner that appeared does not work.

  MacBook Air 2013 El Capitan 10.11.6

  Right-click on the item you want to remove.

  If you like the old way better, inform Apple.

  To send comments directly to Apple, use this link: http://www.apple.com/feedback/

• Can I use the magnetic charger shows to recharge my iPhone or it only works with the watch?

  I'm looking to see if my Watch magnetic charger will also charge my iPhone. Can someone help me understand this?

  Hello

  Non - magnetic charge cable only works for load your Apple Watch.

• Watch is now no paired phone. The watch displays now wrong password, which must be changed on the phone.  However, given that the watch is more matched with the phone, I can't the available option to change the password.  Help please!

  I have a watch that has become not matched with the iPhone with it's Setup.  It is locked with a password and the dial of the watch indicates "Wrong password" and I have to open the App to Apple Watch on my phone to re - activate the entry of access code and try again.  However, the iphone has stated that on the phone became not paired with the watch, so I can't do anything, there is no option to change the password and I can't pair the watch with the phone because it is locked.  This is my boss's phone... Help, please!

  If you have forgotten the password for your Apple Watch - Apple...

  < edited by hosts >

• iPhone battery has decreased with the Apple Watch

  I recently got a Apple Watch for Christmas, I've been very happy together and have (almost) no complaints with the watch in general. Although I noticed that my iPhone's battery life has decreased considerably since I've matched with Apple Watch. Instead of returned from a day's work with 50-60% on my iPhone. my phone is almost dead at the end of the day. I have an iPhone 6 and 38 mm Apple Watch Sport. Does anyone have a solution, or even a final reason for this issue?

  Hey SupaCupa,.

  The following article has a number of useful tips to extend the life of your iPhone battery - Batteries - maximize Performance - Apple

  Thank you for using communities of Apple Support.

  Calculation of the happy.