Similar Questions

• Satellite P20 does not start - BIOS are not displayed

  I have a Satellite P20 and recently it does not start. When I press the power button that disk HARD will light up and it will check the cd-rom drive, but the screen is blank and will not display the bios screen. I can only turn it off by pressing the power button.

  Is it likely to be a hardware problem? I'll try to remove the RTC battery if possible to see if this resets the bios.

  Thank you

  Hello

  Maybe you have a problem with your battery from the Machine.
  Please make a new start without the battery.

  Go that wasn't you maybe has a possibility with a display of extern.

  I hope this is a help.

  By

• The fans are not stop working after upgrading BIOS on Satellite A200

  Hello

  IM using the Satellite A200-1bp. I recently updated my BIOS 5.20 - winner and my fans are not end all the time working.
  I think his reason is update BIOS
  I'm looking for the BIOS below.

  Please help me...

  Hello

  Maybe this thread can help http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=128543

  Make sure that you use the right BIOS for your laptop model.

• Kensington Trackballworks sometimes has several icons in the tray system, exposed behavior, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected

  Original title: Kensington Trackballworks sometimes has several icons in the system tray

  Every so often from the start (no apparent reason) multiple Kensington TrackallWorks icons appear in the system tray and the unit behaves erratically until all but one of them are closed. Behavior exhibited, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected. I use a Kensington Expert Mouse and TrackballWorks 1.04 K64325 model number. Uninstall and reinstall the driver didn't help, or does uninstalling and reinstalling Windows.

  I checked with MSCONFIG, Autoruns and even when several copies work they show only one entry for the application. Any ideas /.

  Hello
   
  Since you've already tried to uninstall and reinstall the driver/windows, this could be a hardware problem. Please try to contact the manufacturer of the mouse for assistance on this issue.

  http://us.Kensington.com/HTML/1458.html (you can select the Technical Support of this link and then select Product Knowledge Base)
  http://us.Kensington.com/HTML/1445.html

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• HP ENVY 15-j049tx Notebook PC: My Beats speaker are not working not

  After my 10 Windows Update MY built-in speaker beats before and serious back does not work.

  only 2 speakers under work

  I tried to reinstall the drivers again and again

  but they do not have 10 caompatiable windows drivers on the hp drivers website

  What should do?

  Hello

  Try the following.

  Download the Installer Windows 8.1 IDT Audio on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Satellite P755 - Bios is not accessible, but Windows works

  Hi all

  I have a big problem with my computer. My Bios does not appear...
  At the exit of Windows 8, I did a full format on my computer to accommodate this new OS with beauty. Some time later, I installed Ubuntu 12.04 in Dual-Boot.
  One of the two facilities are doing? lost me the BIOS, let me explain:

  Knowing that my computer is a Toshiba, normally, when I start, the first image that appears on the screen is the Toshiba logo and down ' press F * to access the BIOS. " But I have no more of this logo, instead, I Dual-Boot option appears asking me to choose one of the two BONES (I think it's the GRUB, I'm not sure, but he was purple, so...). After selecting one of the two BONES, I go straight to the page load of the chosen one.

  I didn't get worse, so I left it because it wasn't bothering me... until last night.
  My computer was getting a bit slow, I decided to format it again, but as I said, I have no BIOS, so not boot via DVD at startup. I had to format by Windows, leaving behind the Windows.old folder on the hard disk. But I wanted to fix my famous problem at the same time, so I decided to uninstall Ubuntu and install Windows 7 instead of 8.

  Everything was going well with uninstall and install.

  Win7 is restarted, still no Toshiba logo, and I get the Dual-Boot option, as before, asking me to choose between Ubuntu and Win7 (I already uninstalled Ubuntu), but this time, the screen is not "purple", it is black...

  When I'm on the Dual-Boot, there are only two buttons that work, the F8 and F10.

  When I press F10, I have this:

  Change startup options: Windows 7
  path-windows-system32-winload.exe
  Score: 2
  hard drive: 97f097f0

  / Noexecute = optin

  When I press F8, I enter the menu of Windows repair, where there restore Windows, command prompt, repair Windows, etc...
  I tried a few things, typed on the command line like fixmbr, etc, but nothing worked

  I'm stuck on Windows 7 without Bios and a Dual - Boot does not work, I don't know what to do...
  I've looked everywhere where my problem comes from, but does not have the awnser.

  For more information, I have a Toshiba P755.

  Well, I hope someone answer, even though I know that this problem is a bit weird...

  Thanks in advance to all who will try ^^

  I think that the dual boot is always available in the Master Boot Record (MBR) and so this double menu boot appears to turn on/off the device.
  But this should not prevent the notebook to access the BIOS.
  Usually, you can access the BIOS by pressing F2 while turning on the laptop.
  I recommend that you press this several times in the line.

  However, I think that the reason why the Toshiba screen projection does not appear is simple: in my view the QuickStart has been enabled in the BIOS.

  You will find the option called startup speed in BIOS-> Advanced tab.
  Usually its normal value.

  If his play on Fast, the BIOS should start from disk built-in HARD (or SSD), the laptop would support only the LCD and keyboard internal and does not display Toshiba Startup logo. Therefore, put again to normal.

  In which case you would not be able to access the BIOS by pressing F2, I recommend to remove the portable computer HARD drive and turn on the unit without the HARD drive.
  Then press F2 to enter the BIOS

  Your comments and good luck would be appreciated,

• BIOS DOES NOT SEE ANY SATA HARD DRIVES

  I recently (about three weeks) ago added a 250 GB Samsung SSD EVO 840 to my desktop HP Pavilion a6437C PC 2008.

  This SSD has been configured with a clean install of Windows XP.

  The original 500 GB HARD drive (on which I kept the original, fully functional installation of XP on one partition and all my data on another), was retained and was used primarily for the storage of data... even if I left the XP partition instead of use as a backup OS.

  Once I have everything configured, up and running, both drives worked fine in their assigned duties for at least two weeks.

  The PC is on when I left the House earlier today.  I came home and the power of the PC was turned off (I don't know if there was a power failure or other event).  When I turned on the rear PC, I got the dreaded "Disk Boot Failure" message.  Restarted, press F10 to view the BIOS, and I noticed that only two CD/DVD drives have been detected.  Ni the SSD or HARD drive have been detected.  A ran Diagnostics PC - Doctor F9 and got BIOHD-2 (no drive detected)... what I already knew.

  I've been Googling vigorously, and my guess is that, since the TWO discs are not recognized, and the problem that manifests all of a sudden, the problem lies with the SATA controller or motherboard itself.  I think that it's extremely likely that both discs would fail completely and at the same time. Can anyone suggest what I could take so I can verify or disprove this?  Also, it's an old PC so it prob'ly is not worth starting to replace the mobo... is possible to replace just the SATA controller (assuming that it is the culprit)?

  Maybe it's time to bite the bullet and get a new job.  I discovered that I can't use many of the features of my new SSD fancy, because the material a6437c and firmware doesn't support them.

  Any other suggestions would be appreciated as well.  Thanks in advance!

  Laiki, welcome to the forum.

  You did a very nice job of explaining your situation; nothing left out.

  Because the computer is older, I go to this from a different angle.  I recommend that you check the power supply (PSU) to see if it has failed, because the computer turns off for no apparent reason.  If there is no power to the system, you will not get a boot.  The power supply can cause many problems we don't necessarily attach to it.  Here's a guide to help you troubleshoot it.

  If your problem is solved, please click "accept as a Solution.

• BIOS is not compatible - ACPI Presario S6289UK

  Hello

  My 7 year old standard desktop Compaq Presario S6289UK(Pentium 4) suddenly stopped start Windows XP family (SP2), just repeatedly attempt to restart without result. Just safe mode and last known good does not work. When the system restore is called I get a blue error screen: -.

  «We apologize for the inconvenience, but Windows could not started correctly...»

  THE system BIOS is not fully ACPI-compatible. Contact your system vendor or visit www.hardware-update.com for an updated BIOS. If you are unable to get a BIOS updated or the latest BIOS supplied by your vendor is not ACPI, you can turn off ACPI mode during text mode Setup...
  Press F7 when you are prompted to install storage drivers. The system will notify you that F7 was pressed and it disables the API silently and allow installation...

  Technical information Stop: 0x000000A5 has been found a problem... BIOS is not ACPI compatible.

  Given that I had not changed the PC recently (just replaced the keyboard cable with a focus on the wireless PC USB line and installed Norton Antivirus 2010, who worked for a week) and www.hardware-update.com seems spurrious, do I need to upgrade the BIOS (Phoenix Award v3.15 05/08/2004)? With the system in this State, I don't know how I would like to re - install Windows even though I should try that before the BIOS...

  I checked inside and I am confident that no internal connections are are spare.

  Any help is greatly appreciated!

  Thank you

  Gareth

  Thanks for your fast help, my problem has been resolved and you prevailed of flashing the BIOS, which I was about to do.

  I opened the box and cleaned, that made no difference.

  Which solved the problem was getting into the BIOS setup and implementation in diagnostic mode. All of a sudden Hey hop, windows open to the top as usual and the PC now works fine.

  Weird but true.

• Disappeared from the toolbar URL, and modules are not coming back.

  Hi people. Once more Firefox drives me crazy, I woke up this morning, turned on the old computer, Firefox has started, and I have no URL bar. I tried to restore it, but no luck. Been looking for the Firefox forums for a few hours, found similar questions, but... .no cigar. I have the version 36.0.4 of Firefox. Can someone please explain how he disappeared and how to get it back?

  I uninstalled FF, entirely. And re-installed. URL bar still to go. Also, I have connected to my SYNC, but my modules are not coming back.

  I would appreciate your help.

  You still have the Navigation bar visible with other buttons on the toolbar and tab bar?

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  Try to rename (or delete) the file xulstore.json in the Firefox profile folder.
  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My messages are not sent.

  I tried to message from a friend that is long distance, he lives in Ireland while I live in the United States. For some reason whenever we try to the other message, he would say "not delivered". I have the iPhone 6 and it has an iPhone 5, both we have also iMessages on and SMS off the coast. How can I fix?

  If you can't send or receive messages on your iPhone, iPad or iPod touch

  Know what to do if you see an alert when you send a message or if you are unable to send or receive messages.

  First try these steps

  1. Make sure that your iPhone, iPad or iPod touch is updated to the latest version of iOS.
  2. If you have an iPhone or an iPad (Wi - Fi + cell), look for an update to the carrier settings.
  3. Check your network connection. To send a message as iMessage or MMS, you need to a cellular data or Wi-Ficonnection. To send an SMS message, you must have a cellular network connection. If you Call Wi - Fi enabled, you can send SMS messages via Wi - Fi. Contact your operator for more information.
  4. Check with your carrier to see if the type of message you're trying to send, such as MMS or SMS, is supported.
  5. If you try to send messages group MMS on an iPhone, activate the MMS messaging. If you do not see an option to enable MMS messaging or group on your iPhone, contact your operator.
  6. Make sure that you have entered the right phone number or e-mail address of the recipient.

  If you still need help, find your question below to see what to do next.

  

  If you see an alert that says waiting for activation

  Make sure that the date and time on your device is correct. If the date and time are not correct, you can change it. Then proceed as follows:

  1. Go to settings > Messages.
  2. Turn off iMessage.
  3. Then turn it back on iMessage.

  If you still cannot activate iMessage, contact Apple technical support.

  

  If you see a red exclamation point

  If you try to send a message and you will see with an alert saying no delivered, follow these steps:

  1. Press on , then press Retry.
  2. If you can not yet send the message, press on , then press send as a text Message. Messaging rates may apply. Contact your operator for more information.

  

  If contacts see your e-mail instead of your phone number when you send messages

  Your iMessage settings can be on receive iMessages and start conversations of your Apple ID instead of your phone number. Check your settings to see if your phone number is set to send and receive messages:

  1. Go to settings > Messages.
  2. Tap, send and receive.
  3. Make sure that your phone number is listed and selected under you can be reached by iMessage to and start new Conversations for.

  If you don't see your telephone number listed, you can add it. Follow these steps:

  1. On all your devices, go to settings > Messages > Send and receive.
  2. Enter your Apple ID, then tap Sign Out.
  3. On your iPhone, go to settings > Messages > Send and receive.
  4. Press on use your Apple ID for iMessage, then sign in with your Apple ID.
  5. Make sure that your phone number and your Apple ID are listed under you can be reached by iMessage to.
  6. On your other iOS devices, go back to settings > Messages > Send and receive.
  7. Press on use your Apple ID for iMessage, then sign in with your Apple ID.

  

  If you can't send or receive messages on your iPad or iPod touch

  If you don't have an iPhone, you can only send and receive messages with your Apple ID to other Apple devices using iMessage. To use iMessage, go to settings > Messages > Send and receive, and make sure that you are connected to your Apple ID. If you have an iPhone, you can link your iPhone number to your Apple ID in order to send and receive the iMessages of your phone number. You can also Configure text Message Forwarding , so you can send and receive MMS and SMS messages on all your Apple devices.

  

  If you have problems with a group message

  You could meet a group conversation and receive your own message. Or you could get a new phone number and see your old listed as a recipient in an existing group conversation. If you have problems with a group message, you may need to delete the conversation and start a new. Follow these steps:

  1. Open your Messages and find the conversation you want to delete.
  2. Swipe over the conversation, and then press DELETE.

  After you remove the group conversation, you can start a new:

  1. Open the Messages and press on .
  2. Enter phone numbers or your contacts email addresses.
  3. Write a new message, then press Send.

  When you delete a conversation, you cannot get it back. If you want to put parts of a conversation, take a screenshot. To save an attachment in a conversation, tap and hold the attachment, click more, and then tap saving.

• Icons, twitter bolts on the site are not displayed?

  According to the bounding, icons pictures, twitter bolts on the site are not displayed?
  Help please?

  Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

  (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

  "3-bar" menu button (or tools) > Options > content > button "Advanced".

  Here you must "allow pages to choose their own fonts.

  (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

  • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
  • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
  • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

  This seems useful.

• 'Options' are not listed under 'Tools' in the Manger of the activity to change the font size of the incoming messages. Where is he?

  I'm changing the the font size for incoming messages. Thunderbird "helps," says click on Tools/Options/display/setting in the advanced form. When I click on 'Tools' or use "Alt + T", 'Options' are not listed. Where can I go to get the "options"? I am running Windows 8.1 if it makes a difference.

  ALT + T you should get there. Options is under Tools on the menu bar. Pressing alt makes the menu bar appear if not already displayed.

  If you use the AppMenu (square with 3 lines) button click the AppMenu, hover over the Options, and then select Options.

• Two sites that I go to every day are not in a format of Web page on the screen.

  After the latest Mozilla update, there are two sites that I go to every day. These sites are not formatted in Web page format. For example, a site is my century e-mail account link. I can connect on e-mail, but the page that is displayed indicates and looks like a Microsoft Word document. The other Web site is my online banking Web site. No other site don't give me wrong.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Also, make sure that your security (firewalls, anti-virus) software is blocking the files or modify response headers causing Firefox to get the pages as text/plain instead of text/html.
  
  You can check that in tools > Page Info > general and in the net Web Console log (Web Developer > Web Console;) CTRL + SHIFT + K).

  • https://developer.Mozilla.org/en/tools/Web_Console

• New tab and close tab buttons are not enabled

  Firefox new tab page and close tab buttons are not neabled and do a right-click shows the same functions that is not available.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.