The fans are not stop working after upgrading BIOS on Satellite A200

Similar Questions

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• stopped working after upgrade

  Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

  I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

  New version looks ace, so please help.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

  I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

  Philipp,
  Thanks for the quick reply and for the advice that you have presented.
  I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
  After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
  Best,
  JRSTOUDT

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• After update BIOS my Satellite A200-h-13 is slower

  My laptop's slower since I updated the BIOS? I bought this phone 1.5 months ago and now it takes 7 minutes to get started! Internet Explorer takes 50 seconds to start...

  I installed an update that is not compatible with my laptop? What should I do?

  I updated the BIOS on Satellite A200 (PSAE0) to version 5.20 and there is no change at all. Maybe you should back up all your important data and make the clean OS install.

  I know it sounds stupid, but you have to understand that no one here do know your own settings of operating system and what can be the reason for the slow start.

• SD card slot stop working after upgrade a1 - 830 kitkat

  Hello

  After update of the a1-830 (Spain), SD card stopped working. As I said in another thread, it may be a coincidence if, in addition, there is no other reason why (no water, no drops, no high temperatures...).

  Checked the sd card in other devices - works OK

  checked other maps sd in the 830 - nothing has worked

  reset to factory settings - nothing, no error messages...

  My question is, is there some newspapers, dump, something where I can search for messages in error, to find if the problem is actually related to the upgrade?

  Thanks in advance

  Yes, I tried but nothing happened... until apply the latest patch, then the SD card is recognized, assembled and disassembled every second and valid ramdomly saying that the card does not have a file system.

  I'll try an another factory reset and if after that always have the same problem, will finally I bought at the store.

  I'm going to mark it as resolved, I think that this has nothing to do with the update of kitkat

  Thank you all for your answers

  Now, waiting for news about an update of the lollipop...

• Speakers Logitech Z313 stopped working after upgrading to Windows 7

  I delayed upgrading to Windows 7 until after I graduated from College just for this reason. I just installed Windows 7 and my Logitech Z313 speakers that worked perfectly well in Windows XP are not recognized as material.

  There is no yellow! device drivers, I have the "High Def Audio" largest later device driver installed. Troubleshooting Windows does not detect a problem with anything. My speakers are working properly. When I disconnect or shut down the PC, I can hear the feedback and the pop Logitech has no drivers for these speakers because they must be detected automatically by the system when they are connected. I tried unplugging / plugging in different ways.

  Can anyone help?

  Thank you.

  Hello

  I quite had the same problem and found the solution: you must uninstall your device, then go to control-online Device Manager Panel => are looking for the "!" symbol on your list, then right click on 'properties' and 'details', you will see a list with weird names (ex: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_18497662)

  Copy it and go to , paste it into the search bar, and then select your 'Windows' (for me it was 10 Win 64-bit), download the driver and install it. Fact! :-)

  Problem solved ^^ not by Microsoft or Logitech, unable to understand this problem, caused by the update of Windows 10... (-_-(

• Logitech Headset H330 with Mic stopped working after upgrade to SP3 of XP Professional

  While in SP2, all worked, but once the system to update to SP3, the game has stopped working.

  Any help would be appreciated.

  I had the same problem after buying the Logitech H330 Mic headset and use Windows XP with SP3.

  -Solution (at least for me):

  * Go to C:\WINDOWS\inf

  To find the WDMA_USB file. BAK

  * Rename this file WDMA_USB.inf

  * Use the Windows Update Wizard (from Device Manager', select the 'Logitech USB Headset"(with yellow exclamation mark), right click and select 'Update driver...) »)

  * Specify C:\WINDOWS\inf as a location to search for the driver

  * If you are lucky (I was / am!), Windows XP with SP3 will install the "Logitech USB Headset" as USB-audiodevice and you can select (and - finally - use) as audiodevice!

  -Credits and thanks to 'Anonymous' on http://www.mycreativefansite.com/2007/06/solution-cannot-install-this-hardware.html on May 31, 2010 17:36

• Subwoofer stops working after upgrade to windows 7. __

  After the upgrade to Windows 7 my subwoofer is no longer in effect. I tried to uninstall the driver and the re - install the latest drivers, but it does not work. Strange thing, it is that the sub will work in test phase of the program, but not in music playback. Any help would be appreciated.

  Finally figured it for people with Realtech HD audio drivers! All you do is, right-click on the volume in the taskbar.  Click playback devices. Click the speakers properties. Access improvements. Activate bass management. That's all! Alternatively click on correction of the room and set the PB to have more control.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The mouse scroll wheel stopped working after windows updates

  I have a Targus optical mouse with a scroll wheel; and he recently worked like this: when you use the scroll wheel in multiple windows, it would scroll the window (to move the vertical scroll bar) goes up and down.  It was a huge time saver, and I was used to it.

  I installed recently a whole bunch of patches from microsoft, including Windows 7 SP1 and Microsoft Mouse and keyboard Center.  The device is not listed in the center of the keyboard and mouse MS, but there is always a control-> mouse Panel.

  In Control Panel-> mouse, it has still the tab saying "wheel" roll the mouse to a notch wheel to scroll the rows x number of rows (it is selectable, I had 3, but tried to change as well); but it no longer works.  Now, it seems, I have to press the wheel to click, which then shows a circular scroll up/down, icon, and then I physically move the mouse up and down, and if I push down to click again on the wheel, I'm back to a regular movement of the mouse pointer.  It's MUCH more inefficient than the use of the wheel, so I'll try to figure out how I can get the drive working again.

  Should I uninstall MS Mouse and keyboard Center?  I thought about uninstalling and reinstalling the driver; but there is no mouse listed in the Device Manager (only has my touchpad there...)  It's a Targus optical mouse amu10usz; and even once, it was working fine before the installation of upgrades...

  Thanks for any help,
  A.J.

  Hello

  What is the number and the model of the computer?

  I will suggest you to check the mouse with different USB port or another computer, still question remains the same! Follow the mentioned methods:

  Method 1:

  Step 1:

  Update driver mouse

  a. click on start.

  b. click on Panel.

  c. using the drop down next to the opinion of: in the upper right, select large icons.

  d. click on mouse.

  e. click on hardware tab, click the Properties button.

  f. click on the driver tab, click set to update driver.

  Step 2:

  Uninstall the recent update and look for the question. You can first of all uninstall the update MS Mouse and keyboard Center and check.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Method 2:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  I hope that helps!

• Lightroom 6 stopped working after upgrading windows 10

  Hello

  My LR6 will not launch after the Windows 10 major update last week.

  I get this Windows dialog, superimposed on the LR start page;

  Adobe Photoshop Lightroom has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I have no option at this stage, except Lightroom closure.
  

  I rebooted several times (it seemed the same problem three times after the previous updates of small windows) and also reinstalled Lightroom twice, to no effect. When I start a reinstallation I am informed that there may be a problem because the installer has detected that a reboot may be waiting. If I stop and restart I get the same message again when you try the reinstall.

  Has anyone else had similar problems?

  Thank you

  Hi alanw,.

  Please see this thread CC Lightroom freezes when develop mode and manually disable the use of the GPU in Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• Phone stopped working after upgrading to iOS 9.2

  I have updated to iOS 9.2 and my phone (5 s) has stopped working.

  do not send text messages or save and none of the applications to work.

  I do not have a PC at the moment so I can't use iTunes

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.