BIOS HP pavilion m7463 problem

Similar Questions

• BIOS HP Pavilion dv5 problem

  Hello my dear, I have a laptop model

  HP Pavilion dv5-1020el

  I forgot the bios password for my laptop. If I reset bios password through Master reset code.

  When I enter the wrong password, I got system disable error and code 8-digit code is 84005191

  and I have also mentioned that the model number now if someone help me and give me the reset code, I'll be very grateful.

  To reset the BIOS password, you must clear the CMOS settings. To clear the CMOS settings, you must remove the RTC battery and place it after 2 minutes. Here is the link to the Service Manual of your laptop:
  http://h10032.www1.HP.com/CTG/manual/c01550108.PDF

  Please refer to page 59 to remove and put the RTC battery.

• My BIOS HP Pavilion a1640n Media Center Edition SP1 or any other problem!

  White text

  Card BIOS update mother P5BW-P5BW-THE

  2007-10-05, version: 3.17, 1.31 M

  P5BW-P5BW-THE Motherboard BIOS update solves the problems of distortion screen intermittent when the exit mode standby and adds the update of firmware for Intel processors to solve the problems of system stability, from the screen blue and send / don't send error messages.

  I did this update of the Bios even above to HP a1640n PC. This update of the Bios totally messed up my computer.  I found it directly from the HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3245028#n238

  The computer does not start in Windows now.  She keeps just recycling.  I have tried taking the cmos battery and the memory sticks, wait a few minutes, drain the power by pressing the power button.  Then I put it in.  That does not help either.  Where is the original Bios and how I put on my machine to make it work again?

• Forgotten password BIOS HP PAVILION DV4000

  System Bios HP Pavilion dv4000 disabled [05338]

  Dear Sir.

  I forgot password for laptop, bios system disabled [05338].

  I want to install the new operating system, user password, I know it's "'asdf1 ' but using this password I can not change the boot sequence, please send me urgent admin password."

  I'll be very thanfull to you.

  Dear Sir.

  Thank you very much for your immediate response after checking the pasword I'll ifnorm you shortly, if no problem found I will contact you again.

  Good bye.

• BIOS has detected a problem with cooling on hp Mini 210-1004sa fan

  I tried to boot my system and received a message that the BIOS has detected a problem with cooling fan and if the system wouldn't start. Please, what is the best way to solve this problem.

  http://support.HP.com/us-en/document/c02066988

• stop and restart the BIOS G470 2.19 problem 40cn33ww_64

  Hi there, please kindly help me.

  I have laptop of G470, Lenovo. Core I3, 8 GB RAM, 500 GB HDD, Bios Version 2.19 (updated)

  in fact, after I have updated to version 2.19 bios I got these problem.

  When I click on stop. the disc but stops the power still running.

  When I click on restart (on battery) my laptop goes off completely

  When I click on stop (on the adapter) my laptop will reboot.

  first of all, I think that it is BONE, I have try all the BONES, but it is still the same problem.

  Please give me a solution. Thank you.

  
  

• HP Pavilion g6-1311ax Notebook: password for the bios HP Pavilion g6-1311ax Notebook PC gives me a code of 55054770 locked out

  password for bios HP Pavilion g6-1311ax Notebook PC gives me a code of 55054770 locked out, after the installation of Windows 10 upgrade.on window7 it worked fine, I never put a password. need help to get into the bios I thank you again once the code, bios gives me is 55054770

  Try to enter

  40932376

• Pavilion G-7 1340DX: reset password BIOS HP Pavilion

  I need to reset my BIOS of Pavilion G - 7 1340DX password.

  Disable code is 78110369

  Try

  67878969

• After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter the BIOS setup

  After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter into the BIOS setup (via the ESC key).  I installed the BIOS twice and the computer always ignores the ESC key and launches Windows 7.  Any ideas?

  Well you're response made me experiment more and I discovered that the ESC key works if I type repeatedly instead pressed constantly.  Thank you for taking the time to answer!

• Bios HP Pavilion DV6-1360EP problem

  Before you start, I don't know if I'm in the right section, so sorry to this topic.

  My friend has an HP Pavilion DV6-1360EP, he told me he did a Bios upgrade (but he has forgotten of me said if it install it successfully or if it failed) and now when you turn on the computer it gives 3 beeps if I am not wrong, the screen remains completely black, but you can still see the lights near SHIFT NUMLOCK and caps lock.

  I tried to do a hard reset and the key combination which is here, http://support.hp.com/us-en/document/c02693833, I want to do part 2 using a usb key, but since I can't access the HARD disk I do not have the HP_TOOLS or the bios (.bin? extension) backup.

  Any help how to solve this problem? Thanks in advance.

  P.S. If any other information is needed I will answer you immediately.

  I tried something different and I think that I've made progress

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75760-1&cc=us&DLC=en&LC=en&OS=4063&product=4055152&sw_lang=

  I downloaded this version and extract to the pen, to play with the platform.ini I found the name of the file fd must be the same name door in there something like:

  [Platform_Check]
  flag = 2
  PlatformName = 3627
  PlatformName2 = 3628
  PlatformName3 = 3629
  PlatformName4 = 3623
  PlatformName5 = 3624
  PlatformName6 =
  PlatformName7 =
  PlatformName8 =
  PlatformName9 =

  Believe in this, I made several copies of the FD file and rename them 3627, 3628, 3629, 3623 and 3624 and then copied these 3 times more and change they are extensions of .bin file to sync, ROM and the other without.

  In the end, I got 4 files with the same 5 name each.

  I just copied in pen incluiding others files (ie: insydeflash.exe) and tried with Windows + B method, it took 3 minutes, a beep every second, I assumed that the computer was looking for files on the right and then beeps decreased to 2 seconds, I think he was trying to install , after that he stop, after that I tried to start, but it was the same thing.

  In any case I think this method could work I just need to find the right version, how you think Zaq?

  While I wait for answer you, I'll try with the link that you gave me.

• HP Pavilion P6 2055sc: Cant enter BIOS because graphic card problem.

  Hey!
  So for the moment, I try to turn on virtualization, I m able to boot the computer into windows but do not enter network boot (anti-spam f10 key before the HP loading screen) but because of the past problems, I struggle to get into the BIOS.
  It all started when I got a new (Asus Geforce GT740) graphics card and this caused my computer not being able to start, without forcing in the network boot.

  But like I said, when im trying to get into the BIOS, it gets to the screen where it says "Press Escape to access the Boot Menu" which, at that time, it ignores when I press ESC.

  I tried holding it, I tried all the keys F1 - F12, but nothing makes a difference, so im wondering if there is a way for me to get into the bios and work around this problem.
  I looked for so updates to the BIOS, but I couldn't find one so far.

  @alilleland, welcome to the forum.

  The reason for which the computer would not start with the GT installed 740 is, it requires UEFI in the motherboard instead of a standard BIOS.  If you always use the GT 740, I suggest to withdraw to see if you can enter in the Boot Menu.  You can do that by typing the ESC key as soon as the computer begins to start.

• HP Pavilion p6: problems with bios

  Hello!

  I just bought a new graphics card and their tech support told me to update my bios of computers. I tried to see if theres a new update for my computer, but your support site does not work (all I see is a blank white screen) and everything works accept this page where I can see what it takes to put up-to-date.

  Please answer as soon as possible, thank you!

  I went back to Windows 7 and bios update. The graphics card works now.

• HP pavilion g6 problem bios password

  Hiiii...

  I forgot my bios password so when I hit three times it off and displays the code 59080413...

  Please help me...

  Hello

  Try: 46988435

• Pavilion g6 - 2379sr: graph Pavilion g6 problem

  Hello!
  
  I have problems with my HP Pavilion g6 - 2379 sr video drivers.
  Windows 8.1 operating system (x 64)

  Graphics card: Intel HD 4000 + AMD 7670 M

  When I first installed Windows 8.1, my Intel HD graphics drivers and AMD, the two came via WIndows update, everything worked, except fans made a lot of noise even when the PC is idle. I was suggested that I should install the official graphic drivers by manufacturer. So I downloaded the AMD drivers (which should include the drivers Intel aswell)
  on the site of HP my laptop support specific. And now the fun part begins, applications that turned 55 frames per second before, now, is down to only 3 to 5 images per second, no matter what gpu are assigned.
  I have no object in the BIOS settings related to switching of graphs, and no BIOS update is available for my laptop running WIndows 8.1 (there are updates to the BIOS for windows 8, but I'm not sure if I should use this driver for the update).

  Device Manager indicates that two graphics cards work fine, but of course, they are not.
  
  Any kind of help would be welcome!

  Solved my problem!
  
  Apparently the drivers for HP support are not the best choice!
  What to do if someone has the same problem:
  
  1. download the latest drivers Intel HD of the Intel Download Center (make sure that the drivers downloaded matches your Intel processor generation).
  2. download the latest AMD catalyst AMD Download Center.

  3 disable internet access for the entire process stop windows update to automatically install the drivers. (do not enable internet access until all the drivers were re-installed manually).

  4 uninstall the Intel HD drivers via the control panel - uninstall programs.

  5. restart the PC.
  6. express uninstall all the drivers AMD via Control Panel.

  7 restart the PC.

  8 install the Intel HD drivers.

  9 restart the PC.

  10 install the AMD drivers

  11 restart the PC.

  12 turn on the internet connection.

  Now you should be fine, also fixed my problem whitch I previously had on fan makes a lot of noise all the time.

• Pavilion g6-1d21dx: long time driver or BIOS on Pavilion g6-1d21dx number may not resume from sleep mode or Hibernate mode

  When my g6-1d21dx Pavilion was still fairly new, Windows 7 has started to hang whenever I tried to resume from standby or hibernation, and I couldn't get back to work until I held the power button down to force the computer to restart.

  Now, I did a clean install of Windows 32-bit 10, and everything works fine, except for - big surprise - repeated from the previous day and hibernation. Windows 10 adds quick start to the mixture, which also does not work properly, probably because it's a similar feature.

  HP already explained the cause of this problem, or provided a fix? The BIOS I have is F.49, but the projection of BIOS newer on the product page is a F.48. Maybe I need to reduce my BIOS? I saw a post where someone has talked to return to F.46 to fix very similar if not same problem on another model of Pavilion g6. In any case, anyone who is familiar with this issue?

  More details:

  If the quick start is activated, whenever I put him computer have a BSOD and reboot. Usually, the error is unexpected_store_exception but I also had kernel_data_inpage_error a couple of times. The computer appears in the standby mode and Hibernate successfully, but when I try to resume it turns his wheels for a little while and then just restarts, usually without error message. For the moment, I have quick start disabled and sleep and Hibernate in my power options.

  Thanks for any relevant information.

  The solution for me was to install F.46 revision of the BIOS. I got F.49, and the latest version available on the support site is a F.48. I don't know if there is a downside to this...