Pavilion g6-1d21dx: long time driver or BIOS on Pavilion g6-1d21dx number may not resume from sleep mode or Hibernate mode

Similar Questions

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• It takes a long time to access BIOS on the Qosmio X 300 after replacing the mobo

  I JUST REPLACE THE MOTHERBOARD ON A QOSMIO X 300 AND IT TAKES FOREVER TO GET INTO THE BIOS SETINGS, ABOUT 40 MIN. AND WHEN ITS IN, IT DOES NOT RECOGNIZE THE TWO HARD DRIVES.
  THE NEW MOTHERBOARD IS THE NUMBER OF EXACT AS THE ORIGINAL PIECE.

  I TRIED THIS DRUG AND IT DOESN'T WORK...

  Help, please.

  I agree, the RAM should be tested in the case contrary you did something wrong during the process of replacement/disassembly may be the mobo was already damaged

• When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

  When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• optical drive disappears after recovery from sleep mode

  While recovery mode S3 sleep and looking at windows Explorer, a green bar progresses inside the address bar. During this time my DVD RW is present on the screen under the heading devices with removable storage, but as soon as the green bar comes to an end, DVD RW and even the devices with removable storage section disappear.

  This occurs only on standby S3 and I have to reboot in order to keep my DVD RW.

  The DVD - RW is a disk IDE (LG Super Multi DVD drive GSA - 4163B) with an IDE-> Sata converter to allow the use of the sata cable to the motherboard.

  Any suggestions as to why this happens in sleep mode S3 only?

  Hi Peter,.

  What is the brand and model of the computer?

  I suggest you to run the Fixit described in the article and verify.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756
   
  (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
   
  If the problem persists, you may need to update the update of the firmware to the last by visiting the manufacturer's Web site.
   
  Hope this information helps. Response with status so that we can help you.

• HP Pavilion dv6 sleep problem - recover from sleep mode

  Hello, a year ago, I bought a HP Pavilion dv6.  I recently updated all the drivers for it (he didn't have this problem before).

  The problem with this is now when she goes into Sleep Mode, I can't do recover, I press the button, click it, press keys on the keyboard, nothing works.

  When I do all these laptop seems to open upwards, all fans to run again, but the screen is black and it stays black. I always unplug the laptop and plug it back again.

  Help, please

  Thank you in advance.

  Hello! What happens if you click power for a second or two? You must change your power options, so that they work the way you want them to run. I never let my PC pass a 'sleep' mode when plugged into the power supply. If I'm not going to use it for an extended period, I stopped him. Hate the standby and hibernation is even worse.

  Dokie!

  On my PC, I press the power button for one second if if she goes into sleep or hibernation. I guess some of your power options has changed and you will need to change them back.

  

• HP Pavilion 11 x 2 does not boot from USB

  Hi I have problems due to a virus, adware and the need to restart - cannot access after blue screen - how to download an ISO image? As indicated in ISo download tool that creates ISO, etc.

  I used the tool of creation of media, but the usb is not found - are all settings that need to be changed on the computer in public services? About the only thing that I can access

  It's a 110 hp

  Hello Neil,.

  To clarify...

  You try to reinstall Windows on a HP 110-210 desktop PC, correct?

  What operating system is currently on it?

  For the Pavilion X 2, you say that the media authoring tool does not recognize your USB, correct?

  What brand and size is the drive?    It's a Sandisk drive by chance?

• Pc monitor HP Pavilion laptop g7-1390sd will not return after sleep

  The monitor won't after "standby" mode. The only way I can get it back is to turn it off and then back on it has all updates.

  Hello MA750,

  I read your post on how your laptop is not able to boot after sleepmode, and I'd be happy to help you in this case!

  Since the only way to recover your laptop is turning on, then, I would recommend later in this document on a dispute with the sleep and hibernation (Windows 7) Modes. This should help wake up your computer when it went into sleep mode.

  To get help, I'll need to know:

  The version of Windows that you have installed on your computer.
  If your computer has completed all its important updates of Windows.
  If you have updated your drivers from HP the HP SupportWizard.
  If it is a current or recent problem.

  If you have added a new hardware or software on your computer.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

  Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

  • HDMI port does not when I connect the laptop to my led tv
  • In the windows operating system sleep mode is dissappers.
  • On the start menu, the language is Hindi

  There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

  Hello

  As mentioned above, restoring Windows 8 will allow:

  http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

  Good luck.

• Pavilion 11 x 2 PC convertible - display waking from sleep

  Brand new Pavilion 11 x 2 PC - model # 11 - h010ca

  Out of the box, it was loaded with Windows 8. I did the Windows 8.1 update.

  After the Windows 8.1 update, screen brightness cannot be adjusted, but waking up from his sleep was very well.

  I downloaded the HP website display drivers, and who sets the screen brightness problem. But now the screen do not wake from sleep mode. The computer itself is awake as the Windows logo is on, and pressing on it gives me this indicator little buzzing or vibration. To get the screen to work again, I have to make a strong power down by holding the power button until it stops.

  It's literally a computer brand new - 2 days.

  It turns out that it was a problem of drivers. After the 8.1 update, I expect Windows Update or HP update software drivers, but I was wrong. I had to manually download the new drivers, but also an update of the BIOS. Even had problems with Bluetooth. Best solution is to download new drivers, uninstall the old drivers, reboot, install new drivers, reboot and that seems to fix the problem.

• Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

  Pavilion Elite HPE-180 t, windows 7 64 bit began to stop in the past few weeks.  It seems to happen from the sleep mode.  I leave the computer for more than 20 minutes, and when I come back, it is turned off.  When I start again, I have an error message and be able to start in safe mode.  I start in normal mode and I get an error "windows has recovered from an unexpected shutdown" without solution.  I also see an action center say error - consider sending additional information about a problem with the ATI display driver (graphics card is ATI Radeon HD5450 1 GB).  When I click for the solution, says that this solution could not be downloaded.  I've updated my drivers.  I haven't added a new hardware or software.

  Thanks HardBeatZ (HP).

  I did as you suggested and I had to uninstall several times because the device picked up previous ATI vs the generic drivers.  In any case it still stop with the blue screen of death when waking from sleep mode.   Then I went back and installed the latest graphics driver from the HP site for my system. I still had a few stops.

  Then I went through all my devices and checked for latest drivers.  All said that the best version is already installed.  Then I noticed that my HP bt500 bluetooth USB 2.0 adapter had only a driver available for windows 7 32 bit (I have installed 64-bit).  I used a keyboard and bluetooth mouse.   So I unplugged the adapter and have resorted to the USB keyboard and mouse and closures of blue screen stopped.  It seems that the network card was originally wake up from its sleep.  I also disabled the reactivation of LAN in the properties of the network adapter device.

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• HP TouchSmart Ultrabook 4 ENVY: fried, drive will NOT boot from usb

  Hard drive clicking on, definitely fried. Replaced by the new hard drive. No matter what I do, it will not start from the

  bootable USB key with windows 8 install on it.  Stick to boots on other computers.

  I press ESC to the maximum power that I can get the boot menu, F1 works great, F2 works very well.  If I select F9 for boot options, for bios F10 or F11 to restore it goes back to the found boot device, hard drive (3F0) asks me to press F2 for the diagnosis of sys, the screen flashes. will not change.  No matter what I try, I'm stuck in this endless loop.

  How can I put an operating system on this device?

  Model # c2k82ua #abl

  Nothing I've tried has worked. However, I have finally managed to make it work has that.  I disconnected the battery for the bios for a bit. After that, I could get in the bios setup. Still would not start from a good bootable USB then I activated the Legacy and set the boot order to boot from an external USB Cdrom. Reinstalled windows 8 and all is good now thanks for all the comments!

  Dave

• HP Pavilion dv7-1118eo starts do not

  At the start of the HP Pavilion dv7-1118eo, it seems to stop the sleep mode. Black screen, lights flashes regularly Caps / flashing Num Lock lights. What can be wrong?

  That's what I'd be thinking, too.

• Hi all, I need a little help to try to solve a problem of updating Bios for a long time.

  I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...

  Error code: 3033

  "GoTo" label not found

  on line 89 of w:\patches\i...ate\windows\installer.wbt

  My system is...

  Compaq Presario SR1339uk

  Serial number: CZB5050HBW

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  BIOS version: 3.13 12/14/04

  Operating system: Windows XP Home Edition

  Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.

  Assume that you download SP26760.exe (BIOS 3.28)

  Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).

  Open a DOS (command prompt).    You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.

  Once in the BACK, type:

  CD FOLDER

  go the the directory of temporary files.

  Then make a

  DIR /S 328.LE ROM

  to find the directory where the update files are located.    Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)

  CD pft467D.tmp

  Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches.  By omitting the switches can cause other problems, as have reported activation of Windows problems.

  AFUWIN /i328. ROM /pbc

  For reference, on my system, here's what I saw in these folders:

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir

  Volume in drive C is DRIVE_C
  Volume serial number is FE8F-4AA6

  Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp

  26/04/2011 11:11 < DIR >.
  26/04/2011 11:11 < DIR >...
  24/01/2006 15:31 524 288 328.le rom
  01/07/2004 10:54 53 248 AFUWIN.exe
  01/07/2004 10:54 amifldrv.sys 6 912
  21/02/2006 18:08 526 374 Installer.exe
  09/05/2006 17:10 sp26760.rtf 1 784
  11/04/2005 10:55 398 696 WBDEG44I. DLL
  6 file (s) on 1 511 302 bytes
  2 dir 110,361,944,064 bytes free

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc

  It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do.   If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.

  For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.

  Good luck.!

  -DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).