BIOS in an Acer Aspire 8942.

Similar Questions

• How to access the BIOS on an Acer Aspire V3 - 571 G-9636

  How to access the BIOS on an Acer Aspire V3 - 571 G-9636.

  I want to disable UEFI and secure boot.

  I tried pressing F2, from switching on the laptop of a closed state.

  I tried to hit once, several times he spamming on boot to the top. The laptop still start with windows 8 and I want to remove.

  It is an old NET, but I see a lot of traffic to it if I want to provide an official solution for her. The thread is locked because of his age, please pick up a thread to update or do not hesitate to post your own!

  Here's the article on How to access the UEFI (BIOS) for Windows

• Is there a method for re-flashing a BIOS corrupted for Acer Aspire One D260 (D260-2Dwk)?

  My what Acer one D260 does not start in Windows, I get only a black screen when activated. I downloaded the BIOS support web page, but I can't flash as the computer shows nothing, I can't get into BIOS or Windows.

  So, I would like to know there is a way to Flash the BIOS again in these circumstances (as I found for Acer Aspire A110 or A150, but the method found in this forum does not work with the Acer Aspire One D260.

  If the system does not start, we do not have a method available for the users final Flash the BIOS.

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

• I have a DATE TIME / CMOS / BIOS with my Acer Aspire 5742Z problem

  Hello

  Newbie here...

  I have a strange problem with my Acer Aspire 5742Z (UK), which I think may be the BIOS or CMOS area...

  MAIN PROBLEM

  Guard reset BIOS default time (00: 00:00 on 01/01/2009)... OR... a time '' close '' to what it is supposed to be...

  MAIN STEPS IN THE DEMONSTRATION OF THE ISSUE...  WHAT I'VE DONE

  Removed the main battery and then replaced the CMOS battery twice (in the case of a failure)

  Main battery insert it again.

  The clocks of the BIOS (using F2) countless times, but there's rarely / or is correct.

  STRANGENESS...

  During startup in Windows 7, it almost always does not show the same date and time that I entered the BIOS.

  For example, if I go home at 21:35 on August 28, 2014 using F2, when I boot on Windows, the date and time may say August 23, 2014 at 3:25 pm ish...

  POWER OFF

  If I turn it off and turn off and then turn on, restart the time in BIOS is correct... to 21:43 29/08/2014 (that I have record for good measure).

  If I continue, Windows reads now August 23 at 15:32

  ADJUST the WINDOWS TIM E (UK)

  So, then I change the time of Windows Date to Friday, August 29, 2014 21:48.

  JUST FYI: the PARAMETERS of ZONE SCHEDULE are checked and no changes: (UTC), Dublin, Edinburgh, Lisbon, London

  PANEL, LANGUAGE AND REGION, English in the United Kingdom, short time 21:48, short Date: 29/08/2014

  GEOGRAPHICAL area: United Kingdom

  now, everything seems correct.

  TURN OFF AGAIN and wait a few minutes.

  YOU turn it back ON, and then press F2 that (this time) shows the BIOS default date and time in 2009

  If I continue in windows without changing the BIOS date and time dafault, Windows now displays as 23:02 31/12/2008

  :-(

  That's all.

  I would really appreciate help fixing this problem that makes me nuts!

  Thanks in advance!

  ...   Just in case anyone reads this...

  I just updated my BIOS for the next issue, and the problem has.

  I guess that maybe the BIOS got corrupted!

  I used the simple approach and no short layout has been involved.  I deliberately did not go for the latest BIOS just in case where he brought new questions and confused the situation.

  Shaba

• How to access the BIOS on an Acer Aspire 5600u with win 10

  I can't find how to get to the bios for about a week, I update my 8.1 victory to win 10 and I find no answer to this question... Thanks geert

  http://Acer.custhelp.com/app/answers/detail/A_ID/37064/~/Windows-10%3A-access-the-UEFI-BIOS

  method 2

• How to upgrade bios acer aspire x 3300

  How can I update the BIOS on my Acer Aspire X 3300 desktop PC?

  How can I set the BIOS to start PC installed add in card?

  your latest is for your version.

  XX. BX versions cannot be flashed on xx. AX

• Acer Aspire R3 - 131T BIOS v1.13 link does not?

  Hello

  Is it Acer team technology that could eventually consider the download link for BIOS for the Acer Aspire R3 - 131T v1.13. I am currently getting a 404 ' Page not found '.

  New BIOS was released a few days ago...

  See you soon

  Vince

  I apologize. You are indeed correct. The file looks like it was deleted for some reason any. I sent an email to make the file reissued, it should be available to new early next week. I send you a PM with a link to the file, so do not expect more.

• Acer Aspire XC-605 impossible to update BIOS

  I downloaded the latest BIOS for my Acer Aspire downloads to update Acer XC-605.

  My computer came with the P11 - A2 version and the newer version is P11 - A3L.

  I created a USB boot disk using the disk USB HP and everything seems to work fine. However, when I tried to Flash the BIOS using flash.bat I get the following message:

  ERROR: File Rom ROMID is not compatible with the existing BIOS ROMID

  What I am doing wrong?

  Hello

  In this case, you can upgrade the bios but only under DOS (as you tried).

• Acer aspire E1-521-0694 bios flash failure

  My son tried to update the bios of the acer aspire E1-521-0694 but something went wrong. Now, the laptop wouldn't boot but give a black screen and doesn't do anything.

  I tried several restarts and the LCD came, but just a black screen

  It looks like a BIOS problem for me

  What can we do?

  If it does not start after a black screen, most likely the system needs repairs. We suggest to contact technical support in your region for further assistance in this matter.

  Acer Service & support

• I need support for the second hard drive on my Aspire 8942 G...

  I want to install a hard drive of diving Bay 2nd in my 8945G and I need a support to hold it in place.

  Uses same medium used for the original HD. Any help to locate one, please?

  I didn't use a drive Caddy to install 2nd HD as my laptop has a built-in space to install a 2nd HD. All I need is a hard drive carrier. This support is no longer available because I contacted all online sources recommended to me and was infomed that the part is no longer available.

  So, I used the original media as a copy and one on the metal plate shaped in the same configuration as the original.

  I managed to do an almost exact replica and also managed to locate the 4 screws that I needed a local repair shop comp. I have now the 2nd HD mounted and it seems to work fine. I have access to my DVD/CD stlii would emit so.

  My Acer Aspire 8942 is one of the few models that have been built with a second HD Bay.  A larger...

  Thanks to everyone who responded with advice,

• I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Netbook screen

  If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

  Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

  You can try this modification to allow higher resolutions:

  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

  BIOS - disable hybrid startup:
  http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/

• Cannot enter BIOS or Option of Boot to display on my desktop Acer Aspire M3450

  For the last few days I tried to access in the BIOS or The Boot Options screen by pressing the keys with " DEL " for BIOS and ' F12 ' to The Boot Options screen. Same pressing down both keys on my keyboard and switch to normal startup with Windows 10 logo screen and then type password. I'm sure you know that this office is not supported for parameters of the UEFI. I tried with Settings\Update and Security-Advanced Options- then have 6 names on the double column , but I'm not sure that one to take to solve the problem. Here are the 6 names below:

  System restore

  System Image recovery

  Startup Repair

  Command prompt

  Startup parameters

  Go back to the previous version

  Everything what I wan tis to solve two things by pressing the ekys for BIOS and the Boot Options screen. That's all that I need it. Or I need to reinstall the entire disk operating system Microsoft Windows 10 Home Premium 64?   Either way, my computer's desktop Acer Aspire M3450 game.

  Thank you

  John

  It's a good thing I do not get out the my desktop's CMOS battery. Someone I know told me I 'Try to change the keyboard' Guess - it works now. The USB keyboard that I just bought does not work so I went back to the wireless keyboard that I used all the time. So now my problem is solved.

  Can I ask a question - why doesn't the USB keyboard support to accept that I press the key after the reboot for BIOS or Boot Display Options? Hope that someone here in this forum will answer for that.

  Thank you

  John

• Acer Aspire V3 772 G BIOS grayed out

  Hello
  I have a laptop Acer Aspire V3 (model G 772-9643), Acer sent me the recovery disks for. The first two steps they registered on the included sheet was to insert the disc labeled "System drive", then reboot and press F12 to get into the boot menu.

  When F12 has not worked for me, I went into the BIOS with F2 and discovered that F12 Boot has been disabled. I tried to go down with the arrow, but couldn't. All the options are greyed out, even on the other sections in the menu of the BIOS. Time and date system were virtually the only things not greyed out. Until I have enable F12 I can not change the order of boot on CD/DVD and cannot start the process of recovery with Acer discs, so I'm completely stuck now.

  Any help would be greatly appreciated, it's urgent because I really need this laptop for the school that has already started. The laptop is very expensive, it is important that I try to repair rather than buy a new one.

  Thanks in advance for any help

  If you already save and exit the BIOS, enter the BIOS again and check if the options are still grayed out.

• The Acer Aspire BIOS recovery procedure

  I ran BIOS update program accidentally in my Acer Aspire desktop on windows 10 PC, the program began suddenly and run in the DOS window, then it crashes before finishing, don't know what stage was when crashed on the BSOD, which needed PC to restart to the no reboot No Acer logo, black screen and PC beeps a long short beeps, tried to boot from USB but as long as the screen is black, I can't do anything, only to become recurring beeps.

  You don't know how to recover the BIOS, if someone had this problem with the BIOS and manage to recover the BIOS, I very much appreciate their help on what to do.

  Thank you

  Hi, thanks for the information and the link that I found very useful and informative, to find the good BIOS I couldn't find the option to select the operating system, the operating system is required to download the drivers only. I don't know how to deal with that and if the OS is or is not required when BIOS downloding.

  I also found some information in the user manual on the version of the BIOS and how to recover the BIOS on page 25 failure, but it is unclear what BIOS to use the original during the expedition or the latest version or the other between two release dates?

  What is meant by the wrong BIOS is specific, bad model, or an incorrect date?

  Thank you.

  I look forward to hear from you.

• ACER ASPIRE 471 - E1: UPDATE THE BIOS CRASH

  HELLO, I NEED HELP ON THIS.

  I WAS updating THE BIOS ACER ASPIRE E1 - 471 VERSION 2.11 to 2.18 BUT GOT IN FAILURE, WITHOUT NORMAL MORE to IGNITE.

  WHEN UPDATING THE FILE ORIGINAL WITH THE HELP OF THE ACER SUPPORT WEB SITE, RESTART THE LAPTOP TO WINDOWS POWER ON A BACK PAGE AND DISPLAY IT ON THE SCREEN...

  UPTATING:

  TRUE BIOS VERSION: ZQS 2.11

  NEW VERSION OF BIOS: ZQS 2.18

  PROGRESS...: 0% AND SCOPE WITH A 100% SUCCESS

  AFTER THIS, THE LAPTOP REBOOT AGAIN AND POWER BLUE LED LIGHTS UP BUT NO SCREEN...

  AT THE START OF THE LAPTOP, HARD DRIVE MAKING NOISE OF POWER ON AND.

  NO SCREEN, THE COMPUTER PHONE IS FREEZE.

  ON THE BACK THE INFORMATION OF THIS LAPTOP, THE BOOK SAYS:

  Aspire E1-471-6683

  MODEL NO.: ZQT

  .....

  SNIDS: 31300078979

  So Original BIOS was ZQS but the model said ZQT?

  I have not found a repair for this model, so cannot move too much by myself.

  I found some instructions on the use of USB with the FCN + ESC + Power Buttom combo...

  The use of files with. FD extension inside the USB key.

  I tried 1 for the test and the thing happens as users said.

  Power Led flashes, USB Stick will blink for a few seconds, and then restart laptop.

  BUT STILL FREZZY.

  I think I use the wrog. FD file.

  ACER support website has none. This model in the FD file (or any other type of file, hit. EXE, a)

  You can with ACER Support me?

  Thanks, it is a client of the portable computer of mine, I'm kind of scared at the moment.

  OK, thanks for the reply.

  I got the sollution and will share with you now.

  [edited to conform to the guidelines]

  YOU WILL NEED TO FORMAT A USB STICK WITH FAT (16) PARTITION STYLE.

  -------

  NOW, THE SECRET OF. FD FILE

  YOU MUST PUT IN THE USB THIS FILE WITH THE EXTENSION. FD, BUT THE ACER DOWNLOAD SITE IS ENOUGH. EXE TO THE INSTALLATION, SO YOU GO ON ANOTHER COMPUTER (INCOMPATIBLE WITH ASPIRE E1 VERSION) AND RUN THE FILE...

  YOU RECEIVE AN ERROR MESSAGE, BUT NOT CLICK NOW ON ANY BUTTON.

  NOW, OPEN WINDOWS EXPLORER AND GO TO C:\USERS\(USER ACCOUNT)\AppData\Local\temp\7zS4F0C.tmp

  INSIDE THIS FOLDER, YOU CAN GET THE ST. FD FILE (PERHAPS ZQS.) FD)

  THAT COPY ON USB KEY AND CLOSE THE ERROR MESSAGE. (FOLDER WILL DISAPEAR AFTER THAT)

  WITH THE FILE INSIDE OF THE SECONDARY KEY, FOLLOW THE MANUAL INSTRUCTIONS.

  BASICALLY:

  Steps for the USB storage device BIOS recovery

  To create a crisis USB key, perform the following steps:
  1. format the USB storage drive using the Quick Format option.
  2. save the ROM file (filename: ZQS.fd) in the root directory of the USB storage device. Make sure that there are no other file BIOS stored in the same directory.
  3. plug the USB storage on USB device.
  4. press the button, then connect power cable.
  5. the power button flashes once.
  6. press the Power button to start the CRISIS of the system mode.
  7. when the CRISIS is over, the system auto restarts with a possible BIOS.

  AFTER THAT

  8. update the latest BIOS version for this machine of normal BIOS flashing process.

  YOU MAY HAVE ANOTHER PROBLEM LIKE ME, AFTER RECOVERING FROM CRISIS, BIOS NOW SEE THE ANY HARD DISK, SO YOU MUST UPDATE THE BIOS AGAIN WITH THE HELP OF ANOTHER TOOL LIKE HIRENSBOOT HELP FIXITURE MINI_XP.

  BUT IT IS ANOTHER CONVERSATION.

  THANKS FELLOWS.