BIOS stop code 65910513
My wife forgot her password to the bios, and she can't remember the password
so she needs to have her unlocked laptop bios password
Here the Bios stop Code: 65910513
Hello
Enter: 70678535
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Pavilion dv6 6030ew: BIOS stop code
Hello
I would like to ask for help. I've seen several topics here, similaro already, so here's what my problem is:
I wanted to get into the BIOS to change the boot sequence and what I met was quick to enter the administrator password.
Frankly, I forgot it then enter 3 times wrongly gave me a message:
System disabled
Code: 77658849
Pourriez you somehow please myself around this step?
Thanks in advance,
Tomasz
Hello
Enter 68730289
Kind regards
DP - K
-
Hello
I would like to ask for help. I've seen several topics here, similaro already, so here's what my problem is:
I wanted to get into the BIOS to change the boot sequence and what I met was quick to enter the administrator password.
Frankly, I forgot it then enter 3 times wrongly gave me a message:
System disabled
Code: 59194086
Pourriez you somehow please myself around this step?
Thanks in advance,
Tomasz
Hello
Please try:
46892008
Kind regards.
-
Stop for the BIOS password code
I get a prompt to enter an administrator password or power on password for a HP Pavilion dv7. After 3 failed attempts, I give myself a stop code: 53452842
Help?
Hello
Please try:
42530284
Kind regards.
-
Hi, locked out my computer bios on hp pavilion laptop have a stop code 86402351 any help would be appreciated?
Hello:
Enter the unlock code:
39560997
-
Hp246: Stop code 60016543
I forgot my administrator bios password and I get the stop code 60016543
Enter 75974585
-
HP Mini 110-1134cl: bios pass code?
Help, please! Serial No. [personal information]. Stop the 2MC9454HB6 Code. The last Bios password or code has been 74eovqvzpq the battery is discharged and now the access code no longer works? Is there a way I can get rid of the bios pass code? If this is not the case, is there a new access code. I think that the access code is stupid. Help, please!
Enter 74eovqvzpg
The 10th letter must be a lowercase g.
Use this code to go into the BIOS.
Disable all passwords that are enabled.
If demand for CURRENT password using this code.
Request NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Compaq RT3290-C2: stop Code / COMPAQ
Hey, need a little help here :/
My stop code is 55020283
I can't access the computer without the BIOS password...
Thank you!
EDIT: don't know why my message has ended up here, I wanted to write it here: http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Bios-Password-Halt-code/td-p/270...Enter 40988805
Kind regards
DP - K
-
Stop code 0x0000007E installation Win XP
I do a Windows XP installation on the new hard drive in HP Netbook. When installing happen to point to windows that open, it stops and I get the 0x0000007E error message. I restart and stop at the same place. What is the problem?
Hi Dilbert,
Welcome to the community Microsoft and thanks for posting the question.
According to the description, you cannot install Windows XP, you get stop code 0x0000007E.
I suggest you refer to the article to resolve the problem of the installation:
How to solve an error "Stop 0x0000007E (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED) code error" in Windows XP
http://support.Microsoft.com/kb/330182
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Please follow these recommended steps and post if you still experience the problem. I will be happy to provide you with additional options.
-
Stop Code 0X0000008E (0XC0000005, 0X822711A7,...)
Hello
I tried to use this stupid program called Ccleaner and when he went to clean the registry, in my view, that he fucked it with my drivers or something because now my flipping laptop mouse does not work. in any case, I tried to go back to before that I started the program, but it does not work.
I get the blue screen of death when I start my computer, and then it just hangs. The stop codes are the following;
0X0000008E (0XC0000005, 0X822711A7, 0X8CAE891C, 0x00000000)
Now, I've done some reading on the first 2 codes, but I can't find anything on the rest.
I reinstalled Windows Service Pack 2 and that did nothing. I tried to do a restore and that doesn't work anymore.
Help, please.
Thank you
Chris
Hello
Update your driver, BIOS and any software of control and then work through the troubleshooting services
above if necessary.Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
Sites of the manufacturer of the device.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
We had to reformat our computer and we had reinstalled everything everything went well past that we got on the interent fine, but when it came to the updates, we have just let it go, after the update retarted the computer, we've got a stop code 0x0000c1f5, he also says to make sure everything is correctly installed and if the problem continues to disable bios (cache or the shading may need to use) well in that safe mode to use advance option we tried all the safe mode options and it will guard will stop code that we tried to restart with the cd with f2, f12, f8 (safe mode) and blue screen again, I'm stuck on my computer and vista is to blame that we did a diagnostic test it and very thing achieved what I can do. Any help is appreciated. I have more money because of the loss of jobs and cant downlaod anything because of the stop code. Thank you
Hello
I suggest you to see the steps from the following links and check that it works.
Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
http://support.Microsoft.com/kb/946084
How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
-
COMPAQ PRESARIO CQ57: COMPAQ CQ57 BIOS MASTER CODE
MY COMPUTER IS LOCKED WITH BIOS PASSWORD ON POWER, THE STOP CODE IS 54506678 CAN SOMEONE PLEASE GIVE MASTER CODE TO GET IN? IT WOULD BE GREATLY APPRECIATED THANKS.
Try
41464278
-
I looked far and havnt seen anyone with this stop error message, a few trinkets on whats the cause?
0x0000008E (0xc0000005, 0x006E6940, 0xB2931B3C, 0x00000000)
Thanks for your help!
Hello
For troubleshooting see BlueScreens using BlueScreenView and MyEventViewer and other methods
This thread - top 3 responses (+ 1 other).--------------------------------------------------------------------------------------------------------------
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. In updates of Windows - DISABLE the automatic-pilot plant as those who are older and if Windows Updates suggests a pilot just HIDE (see the method in the next
message). Antivirus is another possibilitySee methods of update driver generic in the next message.
---------------------------------------------------------------
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">-->
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Question about BIOS beep codes
Difficulty locating the BIOS beep codes... can anyone help? I get 3-3-1...
Hello
I found a list of some BIOS beep codes but to be honest I m do not know if this can help you:
[BIOS beep codes: http://www.computerhope.com/beep.htm]
]
The problem is that the BIOS beep codes are different and not all BIOS provides the meaning of the code.In my opinion only the authorized service provider can help you know what this code means.
Why such a code beep appear?
Well, the BIOS beep code if the POST (Power On Self Test) fails.
Most of the Power On Self Test impossible to successfully because of the failure of hardware; for example, motherboard problem.Best regards
-
I have a mini hp x 64 or and my stop code is CNU9254R4M I forgot the password please help
I have a mini 1116nr hp, I forgot the password. Stop code is CNU9254R4M can any one help thanks in advance...
Enter: e9lo7qvbv4 (3rd character is a lowercase L)
Kind regards
DP - K
Maybe you are looking for
-
put the pre screen on when the pre is closed
When the screen is off and empty is there a way to get screen back on without having to open the phone?
-
Satellite A300 after Windows XP Professional 64-bit install.
Hello I followed the steps for all updated and I'm having a problem more.I'll give you as much detail as possible! I created a boot disk for windows xp and used nLite to get my all the SATA drivers properly installed.Luckly, I did everything correct
-
I want to change the grafix card
Hello I want to know if I can upgrade the graphics card to my laptop. Now, a day most of the high-end gaming is not Please let me know if I can do it. My laptop model HP 15-D008TU
-
How to install turbo luxury tax 2011
Turbo Tax deluxe 2011 automatically nor manually will not install on my computer. What needs to be done in order to help with the installation of turbo tax deluxe 2011.
-
Windows XP, no error message. New drivers, then software update from HP, reinstall printer driver. New cartridge is same as cartridge that has begun to do that, so I don't think it's cartridges. The former was relatively new and unused. I tried ever