BIT has disappeared, I try to do Windows updates and get error 80246008

Similar Questions

• The website has encountered a problem and cannot display the page while you try to run Windows update and get error code 0 x 80240036

  I can't update, repeat me the website has encountered a problem and cannot display the page. I need to update to Windows XP Service Pack 3. The error code is 0 x 80240036

  Original title: does not refresh

  Hello

  1 did you changes to the computer before the show?

  2. who is the antivirus installed on the computer program?

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Perform the steps described in the article:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3:

  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  322756 (http://support.microsoft.com/kb/322756/( )

  I hope this helps.

• Using W7 X 64 Ult I try to load KB976422 update and getting error 80070005. __

  Using W7 X 64 Ult I try to load the KB976422 update and get error 80070005.
  It dowloads OK, but when the machine charging the update fails and the system comes back and restarts.
  I understand that this update is for large flash cards, (which I did not), but it is still very irritating not to have a clean sheet on the history of the update and do not forget that it ever works.

  I looked in all the likely places, but can't seem to find this combination. I missed the answer somehow?

  DAve

  Dave

  80070005 is an access denied error. This error occurred never install any other updates? The update in question, KB976422, update drivers 4. Most likely, location of the drivers is 'protected' against driver changes or their registry setting is. Suggest that you manually download the update and save: Update for Windows 7 for x 64-based systems (KB976422)

  Configure the system to boot: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Try to install KB976422 now. If you are prompted to restart.  Who are you installed?

  MowGreen Services update - consumer safety

• I try to install the windows update and get error code 8E5E03FB. There are 4 total updates and they all failed. Anyone know what I need to do? __

  I try to install 4 updates to window that are considered important. I get error code 8E5E03FB. When I search what to do there is no specific answer to this error code. Anyone know what to do?

  Reset Windows Update components: http://support.microsoft.com/default.aspx/kb/971058

  Put the computer to boot: http://support.microsoft.com/default.aspx/kb/331796
  Then try to update windows.

  All the best!

• When you try to install Windows updates I get errors 66A and next.

  original title: 66A and FF errors

  I tried to install the important updates KB2446708 and KB2467174. On the first appears an error 66A. On the second a FF error. How can I solve this?

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I try to down load updates and get error 8007000D. What can we do

  I can not get the updates to install get error messages 8007000D

  Hi robin-elaine,.

  Welcome to the Microsoft Answers community.

  a. what operating system do you use?

  b. If you are using vista then you service Pack1 installed in it?

  I suggest to reset windows update components and then try to update your computer.

  Method 1:
  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.

  http://support.Microsoft.com/kb/971058

  Method 2:
  
  I also suggest that you download and run the tool update of the system on your computer, using the link below.

  System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These contradictions may be caused by various hardware failures or can be caused by software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work. The system update tool attempts to resolve these inconsistencies.

  http://support.Microsoft.com/kb/947821

  For more information visit http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/8fc72d15-af87-40c5-adff-4d81fbbc48cd

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  SupportVisit our Microsoft answers feedback Forum and let us know what you think.

• Try to install 11 updates and get error Codes: 641 80070641

  While trying to install the important updates 11, I get code error "641" or "80070641" but I can't find this code in Windows Help & Support! Can someone please help me with these error codes so that I can finally install these updates.  I am running Windows Vista Home

  Look at this: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-code-80070641-and-code-641-using-vista-64/2ff5fa1c-118d-414d-af02-97e8fecfd548?page=4&tm=1338010757178

• When I try to run Windows updates, I get error code 80017AA7.

  I get this error whenever I try to update Windows (many times).  I can't find a solution.  I don't understand how there can be an error code without explantion, without information and without Windows.

  original title: error code 80017AA7

  Nothing has worked.  I couldn't use the fix - it that it would be closed, with an error message. Finally, I reinstalled the operating system to "of the factory" - he did not seem certain viruses, malware or anything else that would not allow 2 different anti-virus and malware software works correctly.  What I found on other sites, it was the only solution that has worked for others.  A lot of work, updated from the first day and all reinstall.  But now, I have no problems, then?

• When I try to make my windows update I get error 641. I think it has something to do with my windows service install. I just want a simple solution to get my windows install to work.

  When I try to make my windows update I get error 641.  I think it has something to do with my windows service install.  I just want a simple solution to get my windows install to work.  When I try to update itunes it also fails.

  Yes, mechanic system is installed.  but I think that I have fixed last night.  IHAVE has since been able to get my installed updtaes and my itunes updated.

• When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.

  When you try to use windows update I get this error: error number: 0 x 80070424.  In addition, automatic updates in Security Center is disabled, and I can't activate it.

  Tre,

  A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50686.msi.

  `~`

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>
  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Please let us know if it did or did not help to solve your problem.

  If this ANSWER helped, my post as ANSWER of marking close your thread.

  06/26 / 1108:34:03

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  Download and install it manually. Click HERE download Service Pack 3. Save the file to your desktop. Double-click the file and follow the prompts to install. Make sure that you disable security software like antivirus scanners or spyware before you run the file sp3.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.