When I try to run Windows updates, I get error code 80017AA7.
I get this error whenever I try to update Windows (many times). I can't find a solution. I don't understand how there can be an error code without explantion, without information and without Windows.
Nothing has worked. I couldn't use the fix - it that it would be closed, with an error message. Finally, I reinstalled the operating system to "of the factory" - he did not seem certain viruses, malware or anything else that would not allow 2 different anti-virus and malware software works correctly. What I found on other sites, it was the only solution that has worked for others. A lot of work, updated from the first day and all reinstall. But now, I have no problems, then?
Tags: Windows
Similar Questions
-
I can't update, repeat me the website has encountered a problem and cannot display the page. I need to update to Windows XP Service Pack 3. The error code is 0 x 80240036
Original title: does not refresh
Hello
1 did you changes to the computer before the show?
2. who is the antivirus installed on the computer program?
Method 1:
I suggest you run the FIXIT from the link below and.
The problem with Microsoft Windows Update is not working:
http://support.Microsoft.com/mats/windows_update/
Method 2:
Perform the steps described in the article:
You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update
http://support.Microsoft.com/kb/883614
Method 3:
If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
322756 (http://support.microsoft.com/kb/322756/( )
I hope this helps.
-
When I try to download the updates I get error Code 800 B 010 & error Code 66
Original title: I Keep Getting error 800B 010
-----
When I try to download the Dates, I get error Code 800 B 010 & error Code 66Hey, Joe Zerilli,
1. you remember to make changes to the computer before this problem?
Step 1:
You can check the following link and try to run the system update readiness tool and check:
Windows Update error 800b0100
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100
Step 2:
You can also read the following article and try to reset the Windows Update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this information is useful.
-
When I try to run microsoft difficulty I get: Error Code: 0 x 80040154
I downloaded Microsoft fix it. Wehn I try to run a fix I get the error Code: 0 x 80040154. How can I fix it?
Hello Jascar,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to a Fix - It utility and would be better suited to the community of Fix - It. Please visit the link below to find a community that will provide the support you want.
http://social.Microsoft.com/forums/en-us/fixitcenter/threadsBest regards
Matthew_Ha
-
When you try to install Windows updates I get errors 66A and next.
original title: 66A and FF errorsI tried to install the important updates KB2446708 and KB2467174. On the first appears an error 66A. On the second a FF error. How can I solve this?
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I am re - install XP on an SSD. The installation went well, but when I try to run windows update, I get the following error message: "the site has encountered a problem and cannot display the page you are trying to view. I reformatted the drive and re-installed windows many links - no luck, I get the same error message. Old disk HARD charge with the SME XP install updates to drive very well. Help please!
See if the article sheds some light for this problem: http://support.microsoft.com/kb/836941
-
Hello. I wanted to run Visual Studio 2010 Express edition on my Vista Home Premium, but ran into way too many problems. First of all, download have not installed because of a problem with the installation of .NET framework v4.0. Then I tried to VS 2008, but has encountered the same problem with the .NET framework. Whenever I try to run Windows update, it displays error Code 80096001 and said "Windows could not check for new updates. So I tried to download .net directly from microsoft downloads, but whenever I try to install it, it says I need to turn on .net "turn on or off windows features", in the control panel. I tried, but the list is completely empty, it shows nothing at all. I downloaded the vista sp1, but it too installation stops with error code 0 x 80096001.
I tried to disable my anti-virus (avg free). Windows Defender does not initially upward or through subsequent attempts to run it. It shows the same error code. Please advise on how I can solve these problems and use Visual Studio... it's very frustrating because I never had these problems with XP... everything worked.Seems like a lot of corruption. Try Windows 7 repair:
http://www.SevenForums.com/tutorials/3413-repair-install.html -
When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'. How can I fix it? I have Windows XP
Thanks for the help. Discovered that my security on the tools setting was set to medium-high heat. Passed to way according to the instructions of the active-x and now able to access Windows updates.
-
Error code 0 x 80040154 when you try to run Windows Update
I get the error Code 0 x 80040154 when I try to run Windows Update. Need help!
Hi Linda,.
Are you sure that the Virus has been completely removed from your system? The behavior you describe looks like maybe it's still there, or there may be damage he did while he was in your system.
You can try running this repair order: http://support.microsoft.com/kb/929833
Also run this tool: http://support.microsoft.com/kb/947821
and see if there are damaged/corrupted files.
-
8024A 000 error code when you try to run Windows Update on Vista 32-bit
I get the above error when you try to run Windows Update on Vista 32 bit.
I use an Asus laptop and have used the Asus recovery cd.I just replaced the old HD (500 gb) as it failed with a 750 GB HD.I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".Any help would be greatly appreciated.Thank youSamThanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.
See you soonSam -
'ERROR 8024200d' this is the error code I get when I try to run Windows update
code 8024200 D is the error code I get when I try to run Windows update. My Windows Vista computer is SP2 after you install updates.
I tried installing several times with no luck and end up with the same error code. I have "Microsoft Security Essenial" installed on the PC.
Thank you
HelloYou can follow below link that can help you to solve your problem:Windows Update error 8024200dNote: Above the article implies on error 8024200 d. -
Code of State 800070663 when you try to run Windows Update
I get the State 800070663 code when you try to run Windows Update. The update fails. Someone at - he encountered this before?
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
-
I receive [error number: 0x8024400A] when you try to run Windows updates
Recently, I rebooted my computer to make it work better. I have inserted the two disks of Intel and am having problems with the express Installer driver cd indicating that he can not upoad. When I run windows update, I get [error number: 0x8024400A]. I downloaded SP1, SP2 & SP3 from the Web site, but I still receive this message as not having no no access to SP3. Help, please.
http://support.Microsoft.com/kb/2497281
You may be unable to access the Windows Update site...
If you have updated to SP3 see: resolution if you have already installed the latest Service Pack
In case of doubt, to determine which service pack is currently installed on your computer, follow these steps:
- Click Startand then click run.
- Copy and paste, or type the following command, and then click OK:winver
A dialog box displays the version of Windows and the service pack that is currently installed on
-
When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.
Tre,
A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>
Suggest you download and save the fix it.
Then close all open programs and browsers before running MS fix 50686.msi.
`~`
Suggest that you first spread malware as the cause of the problem by following these steps:
(1) have your system scanned by the antivirus/security suite installed.
(2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSShttp://support.Kaspersky.com/viruses/solutions?QID=208280684>
(3) download, install, update and run full scans with two of these tools free anti-malware:MalwareBytes AntiMalware
http://www.Malwarebytes.org/products/malwarebytes_free>
SUPERAntiSpyware
http://SUPERAntiSpyware.com/superantispywarefreevspro.html>
(4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:
http://support.Microsoft.com/kb/310747>
`~`
If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:
How to reset Windows Update http://support.microsoft.com/kb/971058components >
Suggest you download and Save it. Then, close all the open programs and web browsers.
Run Microsoft Fixit 50202.msi and choose its default mode.
After that he finished the race, see if the return code is displayed again when looking for updates.If not, then run the Fixit once more and choose his Aggressive mode.
Restart once it is finished and see if the return code always appears when the updates.IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.
Please let us know if it did or did not help to solve your problem.
If this ANSWER helped, my post as ANSWER of marking close your thread.
06/26 / 1108:34:03
-
Unable to get the windows updates. Get error code 80072EFE. Help!
Unable to get the windows updates. Get error code 80072EFE. Help!
Gary,
ERROR_INTERNET_CONNECTION_ABORTED 80072EFE
You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941
by running the Fixit on this page, you can reset to windows update components. but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components
suggest you download and save the Fixit. then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously. now run the Fixit and choose the default mode. restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. turn it back on when he finished the race and updates.
Maybe you are looking for
-
No results found in iPhone Mail search
I support a medium-sized law firm and several lawyers noted that their search function for their e-mail application works inconsistently. I recently observed that a user can find a search term and getting no results when they have a number of emails
-
Looking to buy a new Macbook 12 "but do not know if its processor can support Microsoft Visio? or should it be Macbook Air or Macbook Pro? Can anyone advice?
-
Application of screenshot for Photon 4 G free.
My phone is not rooted and I don't intend to do that, I'm looking for a free application take screenshots, someone knows a few good apps?
-
How to read the table of string returned by the DLL
I developed DLLS in labview that takes 2 input parameters as a string and returns an array of strings in return. How can I read back this array returned strings in labview? I tried to return a string and I can't able to read. But how to read a table?
-
Vertical lines in messages scanning and fax on HP 6500 a
Hello I have an Officejet 6500 has everything in one. In recent weeks, when I scan a document, the only result I get is in black mode (black vertical lines all over the page). If I use the scanning color mode I get all the lines of color on the page.