Black 2 does not start

Similar Questions

• Call of duty black ops does not start on my pc and another game in hand is intall correctly

  I have compaq presario pc with processor pentium 4 3.2 ghz, 1 GB, vga 256 MB ram and 32-bit Windows 7...

  but call of duty black ops does not start on my pc and another game in hand is intall correctly...
  Please tell me the solution...

  I'm sure that if you looked at the requirements on the box, you would see that you do not respect the minimum requiremnts to run the game.

  You need at least a Core 2 Duo E6600 or better cpu and 2 gigabytes of memory.

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• R51 has black screen - does not start

  This question has been taken before, but I think I may have a unique situation.

  My R51 worked perfectly and was maintained during the 8 years that he was with me. I wanted to update my RAM and downloaded the update to the BIOS and chipset drivers updates.

  After that the tension I pulled the old 256 MB RAM sets under the keyboard and the bottom of the machine. Then I inserted the only 2 GB of RAM into its slot under the keyboard and reassembled it.

  Black screen / no start

  Went out the 2 GB replaced sets of 256 MB and it worked fine for a few hours that I looked for reasons why the 2 GB would not work.

  ' Sudenly the screen goes black and the closed system.

  It will supply (battery light / light green status), but the screen is black and it does not start. The fan is running and the battery costs.

  I tried hitting F12 and F8 but nothing.

  Then, I stored it down and pulled the chip near the connector of the screen and replaced by a spare part I had in hand... still nothing.

  From the CPU and replaced by another I had on hand - nothing new.

  I put all the oringinal gear back in place and tried to put pressure on the Board of Directors for the boot but still nothing.

  Help, please! I'm not very tech savvy but as you can see I'm not afraid to try.

  Thank you

  Thanks George!

  I was able to get the other 51 R spare parts and does the job!

  Send this message to him now.

  I want to send my thanks to all on this forum. It was the first time ever, I cracked the case on a laptop. Thanks to posts in these forums, I had confidence and information to see the job through.

  I have more no fear an attempt to repairs on the Thinkpad.

• Re: Satellite L450D-113 - black screen, does not start

  Laptop will not start. Power led lights up. Fan turns for a few seconds then stops, once again spins and stop.
  HARD disk rotates.

  No presentation of the screen. Nothing appears on the AC voltage ordinary.when his shown as a green light.
  I checked...
  1. open bettery and put it again after 5 min. (result: nothing comes)
  2. open bettery and direct what AC does not rise no matter what?
  3. open the hard drive and put it again after 10 min (result: Noting happens to display) also change hard drive.

  Please tell me wht to do now?

  On this virtual path, it is not easy to say what the problem is here.
  Did you do something that might be responsible for this? Something like the update of the BIOS?

  If I understand you well portable stays all the TIME and everything is as usual, but there is nothing on the screen. Try to connect the external display on your machine and check if something will be displayed on the external screen.

  Please test first and send feedback.

• Satellite L450D-113 - black screen, does not start

  Laptop will not start. Power led lights up. Fan turns for a few seconds then stops. HARD disk rotates. No display. No JOB.
  Scratches it down. Nothing appears out of the ordinary.
  Searched the web. This seems to be a common problem with Toshiba laptops.
  Common fix is supposed to be the power button that is held for a minute or two with battery. This does not work in this case.
  I would rather not throw the laptop in the bin...

  Any ideas before doing the Act, would be greatly appreciated.

  Skips

  Something like this can happen on any laptop so there is nothing directly with Toshiba or any other laptop manufacturer.
  Sometimes this kind of behavior can occur after unsuccessfully BIOS updated. Have you can be made to update the BIOS or anything that may be responsible for this?

  I can't say for sure, but somehow I think the BIOS is screwed.

• Black screen, does not start in safe mode - how do I restart my mac

  Hello, I have a MacbookPro, that all of a sudden will not start. I believe that the problem - from what I've read-, is that memory is simply too fulll. I tried to start in Safe Mode, but of course it doen't work. The screen displays a small bar as it loads, but after a while goes back to the same blank screen and nothing happens. I tried waiting half an hour, but nothing changes. I have not tried to launch utility disk in Recovey Mode because I'm afraid of what will happen to my files. Unfortunately, I unwisely postponed to back up files and now I'm afraid to do anything that my fry them all without me even realizing it. Can you offer any solution that is as safe as possible?  I don't have a cable Thunderbolt.

  Thank you

  If you think that the MBP storage is full and not allowing you to start, try the target disk mode:

  https://support.Apple.com/en-us/HT201462

  Ciao.

• Pavilion 13 x 360 p: convertible laptop black screen, does not start!

  I can't turn on my computer the power button lights up and I can hear the fans and then I get the hp screen and black screen. I read the forum of other messages on out of batteries and other components of the laptop, but since mine is 2 in 1 not sure how. Have had the phone since December, should be doing this already. Any help would be greatly appreciated!

  Watch the following video. Try the method described for the Envy x 2 laptop

• Re: Black magic does not start on my Satellite Pro

  Hi there guys

  I have a program that I have loaded on my PC laptop Toshiba Pro. Its an official black drawings magic program related to video Production.
  The program is designed to work with Windows 7 but he hesitates because it is start and then gives an error window that says that there is a flaw in the aticfx32.dll prog.

  The strange thing is that the program will start when the computer is in safe mode and give the correct opening screen.
  Obviously I can't use it in safe mode as I have all the correct connections of the machine.

  Is the strangest thing is that I was able to make it work on 2 other machines one with XP and one with Vista and it controls the video speed very well. (the other machines are workstations so I can't really use it, I need to be portable)
  Someone else saw the above error? and why it starts ok in safe mode?

  Andy

  Hello Andy

  Toshiba doesn't support any third party application, so please, contact the program manufacturer and ask for help.
  They have the best experience with own product and should be able to help.

• Status: 0xc0000411. File: \hiberfil.sys black screen - does not start. Help?

  Vista 64-bit.  Currents of the MS. updates  HP Pavilion 9830: beep long two short beeps.  Help is appreciated.

  Hello

  "beep" codes are usually a sign of hardware failure

  Here is information on the beep codes and their meanings

  you need to find your computer manufacturer what Bios you have in your computer

  http://www.computerhope.com/beep.htm

  http://www.pantherproducts.co.UK/articles/motherboard/BIOSbeep.shtml

  If you can not fix it:

  If under warranty, contact the manufacturer of your computer

  If it is under warranty, contact a local and trusted computer repair workshop, not a franchise chain store configuration

• Tecra 9100 does not start in windows-black display

  Hi, just found this forum.
  I have problems with my old laptop Tecra 9100 that ive had since.
  I stopped last night, started this morning and now is no longer boots.
  It gets past the Toshiba screen and windows xp scroll bar screen seems in good condition.

  But then the screen turns black and does not go to the XP login screen.
  But windows does not work because if I press on enter newspapers in my profile (I hear the theme music for connection etc, and the HARD drive light is on, connect to windows...) It's just that I have no display at all?

  I also tried an external monitor, always the same, Windows XP, scroll screen still appears, but nothing else appears on the display.

  Any ideas? Hardware failure? (But the toshiba screen and 1 XP appears)? , Because the OS (even thought I can connect, although "blind")?

  Thank you

  It's strange... I put t think that there is a hardware problem because you can see the Toshiba start screen and like you say the Windows starts.

  My first thought was that your display is set to external monitor
  Looks like you have tested and nothing appears on the second screen?  :|
  Which is really strange.

  In any case after the laptop started try to use the key combination FN + F5 to switch to another screen, maybe it helps.

  You can also try booting in safe mode. Press the F8 key at the beginning.
  Then choose Safe mode.

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• Black screen, high regular of underscore on the left does not start after reflashing the BIOS F.38 on HP2000-363NR

  HP2000 363NR, recently tried flashing the BIOS F.38 (here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116227-1&cc=us&dlc=&lc=en&o... ) to solve a problem of overheating.

  Well, it was a mistake.

  Now it does not start at all.

  Fans spinning upwards. Hard disk rotates.

  By pressing ESC, F1, F2, F9, F10 and F11 at startup to give appropriate (fast!) messages but then go to the same place:

  Black screen with flashing underscore in the top left. Leave it to this screen has no effect.

  Never see no text except the quick messages in the lower left (or "Press the ESC key for the system menu" down left based on nothing).

  Out and the relocation of memory does not work. Boot with a DIMM module does not work. Now hold power for one minute while the battery and plug on does not work.

  Battery is fully charged.

  OS is Windows 7 64 bit Home Premium, came with the laptop.

  Is it possible to return this BIOS?

  -Me

  Thanks to Xraytim in the post below, short-circuit the battery CMOS me returned to the previous BIOS. Need to remove card system as a whole to achieve this * beep * connector, but 34 screws later (34 = some # between 15 and 50), BIOS is back, problem solved.

  Thanks for the forum!

  -Tim

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/DV9858ca-won-t-boot-after-BIOS-update-won-t-power-with-AC/TD-p/555547

• boots of the machine to a black screen with cursor flashing by intermittently does not start.

  Original title: slow start, get a black screen and a space bar flashing sometimes it starts not at all and I have to hard start loaded operating system and any backup disc

  slow start, get a black screen and a space bar flashing, sometimes it does not start and I have to hard start loaded operating system and don't back up drive all ides other than buying an upgrade... Please

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/kb/314503