Black And White 2 Installation Help

Similar Questions

• Hi I am using to extend my s video cable desktop display but I am getting only black and white without color help

  Hi, I use a s video cable to connect my laptop to TV screen, to extend my desktop mode, but it's only in black and white I need colors can help you, it comes in the color vga lead but the lead isn't on my tv

  Help

  http://www.TomsHardware.com/Forum/251133-45-Toshiba-black-white-video

  I google your question and according to the above thread, your cable is bad and you need a new.

• How to switch the color to black and white photos

  I can't understand how to use Paint in windows 7... what I try to do is to pass a color black and white photo, please help me by telling me step by step what to do.

  Windows live photos did that ability on its edition tab section, in its effects options.

  I would add that it is almost to easy :)

  Select the photo and right click on and select Edit, click the edit tab section and there are 5 different effects you can put the picture in, select close file when your finished, you can make a copy of the picture first of all you will have both files.

  Your best do in paintings because he has a record under work, something has no wlpg.

• my color (palette and eye dropper) selecter do work, they show only a shade between black and white!

  my color (palette and eye dropper) selecter do work, they show only a shade between black and white!

  Help, please!

  work with photoshop elements 13

  Windows 7 64 bit

  Thank you

  yyrox wrote:

  my color (palette and eye dropper) selecter do work, they show only a shade between black and white!

  Help, please!

  work with photoshop elements 13

  Windows 7 64 bit

  Thank you

  In the editor, Expert tab, go to Image > Mode and select RGB color

  If that fixed it, go in Edition > Preferences > General and reset preferences, then launch program again.

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again

  Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again? Any ideas for help?

  Hi rsev,.

  For existing photos, select all your images in the grid view, and then click the Reset All button in the quick develop Panel. Then click on the auto tone button to correctly apply this feature.

  To prevent this from happening in the future, choose Lightroom > preferences > Presets (Mac OS) or edit > Preferences > Presets (Windows). Uncheck the apply auto tone adjustments.

  Reference: thumbnails appear black in Lightroom CC 2015.2/6.2

  It will be useful.

  Kind regards

  ~ Mohit

• EOS Rebel T3 Led display has two lines black and white grainy to and controls are frozen help

  When the unit is powered on any of the controls development works and the LED screen has only black and white grainy lines above. Tried to remove the battery to restart made no difference. If you have an idea of what happens to your help would be appreciated a lot.

  Did you drop or wet?  Call the Canon Service.

  BTW, the battery must be removed to reset the camera like this for a week or two.

• Help: VISTA is only in BLACK and WHITE for the admin user

  I went to another user in a game that worked well, but when I logged in this user and back in my usual admin user account, every day the screen is black and white while charging. Everything still functions very well except there is no color - all settings in the control panel and NVIDIA Control Panel suggests that it is the color display. If I connect to another account the color returns. Unfortunately system restore has been disabled for some reason any so that I can't restore to an earlier time. I downloaded and re-installed the latest driver for my graphics (NVIDIA 260 M GTX), but this does not solve the problem.

  Google search suggests some people have had this same problem, but still there are no solutions. Any help much appreciated.

  Hi Krisbell1,

  Try to change the theme and see if it makes a difference.

  1. Open theme settings by clicking the Start button, clicking on Control Panel, appearance and personalization, customization, and then click theme.
  2. Under theme, select the theme you want, and then click OK. Bottom of the form

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Bindu S Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• black and white theme disabled... window change... help please

  Last week, I went to change my theme. The entire page is black and white, all themes are blackened and can not be used. When I download other themes and try to use them, I get an error saying "this theme can be used... "It is a system of HP, with a card mother cpu I7 and 10 Gig of memory, running with Windows 7 Ultimate edition. I've never seen this problem before. I'm updating on Windows Update.I have another system, also on Windows 7 Ultimate and a third on the beta version of Windows 8, and they both run themes perfectly. Who can help? Thanks in advance... Jerry Cohen

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/solution-to-wallpaper-stuck-on-stretch/b21ef913-6de9-42a7-bf75-8b4355975d46

  Black screen after that Cruiser connection still works

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/d47aece7-5e12-46EC-8d3e-e8671730a7ce

• Beginner help.  Changing an image of the stock in a pure black and white image without grayscale.

  I'm taking a black and white (gray scale) tigerpaw and convert it to a totally black and white image without grey scale.  I imported the image (free, unprotected) and size it.  I used the magic wand to select all areas not black and I want to just convert to white, but I can't seem to understand this.  I'm sure this is a stupid question, but the solution is to escape despite the search. Thanks for any help.

  Now that you have selected all of the areas you want to edit white > fill and, in the field of use, choose white. The mixture of Normal mode.

  If you wish, you can select > Inverse the selection and edition > fill with black

  Then select > deselect

• My iPad3 is only in black and white, no color at all. help please.

  After overnight battery charging, in the middle of the night, my iPad3 began and woke up the House with music strong and graphic of an unknown game for me.  The battery charge was at 7% even if she had been on royalties for ov er 5 hours.  All the graphics were in (negative) reverse black and white with no color.  I would appreciate and advice from the community and wait here on your part.

  Settings > general > accessibility. Watch invert colors or levels of gray. They both should be set to Off.  Maybe a power surge caused the problem?

• Why have my tiles left black and white? I don't know how to change the color. Help :(

  I bought and downloaded windows 8 online a couple of weeks. Not since the PC then, but tonight when I registered on my tile was and is always black and white. Why? and how to fix it?

  go to settings, then accessibility, then turn off your "high contrast".

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• Director of Windows capture only in black and white no color

  while trying to capture video from the color, it captures only in black and white

  Does not appear to be a 500 GB hard drive, but it can be
  a partition that uses a part of the training. In any case...
  you have enough free space and that's what I was afraid
  everything.

  I think it may be interesting to try to update your video driver.
  There is a recent version (18/01/2011) for your Nvidia Geforce
  6800 video card.

  GeForce/ION Driver Release 266.58
  http://www.nvidia.com/object/WinXP-266.58-WHQL-driver.html
  (do not forget to consult the list of "supported products" to check that)
  your video took card supported)

  A way to check the make and model of your video
  adapter is to launch the Device Manager by clicking on...

  Start/run and type or copy / paste:

  devmgmt.msc

  And then press ENTER.

  Expand "Graphics cards" by left clicking the +.

  Right-click on the name of your card and choose...
  Properties / driver tab... This will display the name,.
  Version number and the date of the driver.

  Download the updated driver for your computer desktop and the left
  Click to install. There is some info to install it at the following
  link:

  NVIDIA driver help
  http://www.nvidia.com/object/drivers_faq.html#installing

  Personally, I think it's a good idea to disconnect from the
  NET and close all programs, especially of before virus scanners
  installation of the driver.

  If you decide to try it... maybe... I mean just maybe you
  will be able to capture your video in color.

  Good luck...

• I can't seem to change the black and white on my Lexmark printer.

  At the same time, I changed my printer set default print black and white.  Then I would just change color when I need it to be.  Then I noticed that the check box for printing black and white has been checked and gray, so I couldn't change it.  I thought it was because I was really low on my color.  I now have a new color in this cartridge, but still it won't let me uncheck the box in black and white.  I tried to restart my computer but no change.  Help, please.

  I have a Lexmark 7600 series.

  Check the settings of the printer itself to verify that it is not changed and there only in black and white (if there are all these settings on the printer)-which would probably override the settings on your computer.  BTW, what is the exact printer?  This is it: http://support.lexmark.com/index?page=answers&startover=y&question=lexmark+7600+series&locale=en&productCode=LEXMARK_X7675&segment=SUPPORT&userlocale=EN_US#1?  If not, what is it?

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldget them to at least the printer (http://support.lexmark.com/index?page=content&productCode=LEXMARK_X7675&actp=PRODUCT&id=DR11032&segment=SUPPORT&userlocale=EN_US&locale=en (if I was just on the printer above and you are using 32-bit Vista) and all you have time to do - they can help way beyond simply solve this problem)) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. You can also try the Driver Verifier Manager to see if you can identify the driver or the responsible device (assuming that it is the cause):http://support.microsoft.com/kb/244617.

  Also, check the color cartridge belt moves freely and not get stuck on one side or the other - if the belt does not move, the printer can turn off the option.

  Remove the printer from the computer (I do not mean the drivers or software - I mean the configuration in the control panel).  Create a new printer in the start menu / control panel / printers section. Click on add a printer and start from scratch.  Then see if the new connection/configuration of printer works better than the old.

  If this does not work, then contact Support technique Lexmarkhttp://www1.lexmark.com/content/en_us/about_us/contact_us.shtml and see if they can help you because I don't think it would be a problem of Vista if you have reinstalled everything.  It may be a problem with the installation but it can also be a hardware problem - so be it, they should be able to help.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.