Black border and Laserjet 1606

Similar Questions

• Monitor LG Flatron L245WP-BN is cut off at the top and has a black border at the bottom of the screen

  Monitor LG Flatron L245WP-BN is cut off at the top and has a black border at the bottom of the screen. Connected to HP laptop Pavilion via a HDMI cable. Is it possible to align the screen so the full screen is showing?

  Help, please!

  Thank you

  navers wrote:

  Sorry! It's a HP Pavilion 15 laptop. I can give you the number of the product if you want? Windows 64-bit of 8.1

  Thank you for the additional information.

  Yes, the product number would be helpful.  Please do not provide the serial number, however.

  I think that your problem is perhaps that the monitor is not compatible with Win 8.1.  The only available updates are for Win XP and Vista.  You can find this information in the link that I provided in the article titled "Software Update".

  I suggest you contact LG Customer Service to see if they can help you.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Watch the Black Border ATI HD4670 and ST2410 HDMI Cable

  There is a black border on my screen that I just put in place today 21/01/2010 from Dell which is approximately 1 "all around.

  The office is set to 1920 x 1080 at 60 Hz

  I can't find a setting in ATI Catalyst Control Center to adjust it to the height and width of the full screen.  I found this post http://en.community.dell.com/forums/p/19309246/19620047.aspx#19620047 with these tips...

  «Open the Ati Catalyst Control Center - digital Panel properties - attributes - resizing the Image and select "Adapt the image to the size of the full panel".»

  and have not found this device setting of anywhere.

  Anyone know the solution? Do I need to download a newer version of the CCC?  Thank you

  It's the implementation using an HDMI cable

  GIGABYTE GV-R467ZL - 1GI Radeon HD 4670 1 GB 128-bit DDR3 PCI Express 2.0 x 16 HDCP Ready CrossFireX Support video card http://www.newegg.com/Product/Product.aspx?Item=N82E16814125277 and the Dell ST2410

  I just fixed the problem BLACK at the BORDER.

  In the Catalyst Control Center (CCC for short), check if the following settings:

  Right-click on your desktop and go to the Catalyst Control Center. Switch to advanced mode if it isn't already.
  -At the top left, click on the menu "Graph", then "Desktops & displays.
  -For your desired display, left, click on the small black triangle in the lower part of the screen, on the SMALL image, not the BIG and click on 'configure '.

  This part is very CRUCIAL. There is a little image of a TINY TINY TINY TINY arrow display down FAR LEFT of the CCC menu. It's this LITTLE ARROW that you click on the button that says "Base...". "and the button that says 'OK' when you click the arrow of llittle black small-small (not the big black arrow in the middle of the CCC window you will be able to click on 'Configure', then the following will be available):

  There are 6 buttons at the top of the CCC

  Attributes

  Avivo color

  Scaling options

  HDTV support

  Screen LCD Overdrive

  Pixel format

  Under attributes

  -Check the box "Enable the GPU scaling" and select "scale image to full panel size. Hit apply.

  Under scale Options

  -There is a scroll bar to set Underscan and Overscan. I updated 0% Overscan and everything was perfect instantly.

  Click on apply

• View my pictures with a black border?

  When you edit a photo, in that it appears a black border that one I find it really increases my photos.

  As I browse through photos in an album, I want to see with the same black border.  I think it improves their and would help me to decide which photos to keep and throw away.

  I can't find a way to use a black border, it is just white.

  

  This is not a feature of Photos - suggests to Apple - http://www.apple.com/feedback/photos.html

  LN

• Mysterious black border (only) at the bottom of the first screen iPhone

  I have an iOS application that I wrote in 2011, and I'm trying to upgrade to the latest iOS and devices.  I have a thick black border at the bottom of the first screen of my request, for most combinations Device/Simulator and iOS. This is * not * a black border at the top and at the bottom of the screen problem, who has been treated exhaustively in the forums.

  There is only a single black border at the bottom of the screen. Also, the border is only broadcast on the first screen of my request, that has buttons to go to the rest of the application. Even if I navigate to the first screen of my request, somewhere inside the application, the border becomes visible. There is no black border in the other forms in the application, apart from the first screen.

  It is * not * seems to be a launch image problem. I have a picture of launch, [email protected], and the launch image works fine. Here are the setups I get or don't get the black border:

  iPhone 4S (iOS 9.2) Simulator - without black border

  iPhone 5 (iOS 9.2) simulator - black border

  iPhone 5 (iOS 8.1.3) device - without black border

  iPhone (iOS 9.2) 5s simulator - black border

  iPhone 5 s (iOS 9.1) peripheral border - black

  iPhone 6 sec more (iOS 9.2) Simulator - black border

  iPad 2 (iOS 9.2) Simulator - without black border

  iPad (iOS 9.2) air Simulator - no black border

  iPad 2 Air (iOS 9.2) Simulator - without black border

  Pro Simulator (iOS 9.2) iPad - thick black border all around the application window

  retina Simulator (iOS 9.2) iPad - without black border (at the bottom of the screen)

  I tried everything I could think of, but nothing seems to work.

  Hello sandpjain2,

  Everything you wrote in 2011 will likely be rewritten using the automatic formatting.

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• Satellite L500-1XL: black border play Big Fish Games

  I have a Toshiba Satellite L500-1XL and also on another laptop. I have some downloaded games from Big Fish games on two laptops. On the other laptop, they appear full-screen mode, but on the Toshiba there is a black border all the way round which makes the image much smaller.

  How can I make them appear full screen on the Toshiba please
  Gary

  Have you tried to change the resolution or video settings in the game options?

• Thinkpad8 to the TV via HDMI 1080 too big picture 720 large black border?

  When I connect my thinkpad8 to any TV supports 1080 p it will always cut the image around the edge as if its too big, so when I drop the 720 p resolution, you end up with a huge black border.

  I had a play with the graphics created intel and cannot see anyway to get on the scale so that the picture fills or adapts to the size of the TV screen.

  Ive checked on the lenovo utilities / win update / update intel for gfx driver updates and there is not, I believe that my current version of the driver is 10.18.10.3643.

  If someone can point me in the direction of a fix, I would be extremely grateful.

  I solved this by the way "overscan" in the TV menu, that it seems that it is 'on' by default on most TVs

• Pavilion g6: black border appeared on the right side of the screen - the task bar disappeared downstairs - 1280 x 800 (recommended)

  My laptop recently hooked and I couldn't even do a ctrl/alt/delete to run the programme of work to see what was going on, so I turned off manually. At the start, I have a black border running down the right side of the page and can not see the taskbar at the bottom. I put in 1280 x 720 resolution to allow access to the bottom task bar. I updated the driver for the display, but this did not remedy the problem. How can I go back to 1280 x 800?

  FIXED! Last series of Microsoft updates have cured the problem. The resolution is now in 1366 x 768 (recommended)!

  I can't think I powered the phone turned off when microsoft have downloaded updates, too bad Microsoft doesn't inform you they do this and then freeze you :-(

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• How can I get rid of the black border around my screen?

  After an update, my screen resolution changed for no reason. Tried to change, but now I have a black border around my screen that I can't get rid of.

  Hello

  Windows Update will sometimes offer you updates of graphics drivers; NEVER accept them.

  Only go graphics drivers of your computer or the manufacturer of the graphics Web site map.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is the information on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Does not recognize a narrow black border a white border when printing without margins

  Photosmart D7460, Vista 64 bit,

  If I put a white border around a picture with a narrow black border outside a photograph and select borderless printing knows no black and white borders and prints the image within the borders to the edge of the page.

  If I want white edges around pictures and a full letter size print, I get a border that is wider at the bottom than at the top of the page.

  Can I configure it to print even a white border around the photo of the letter size?

  and

  Can I get the printer to recognize a border color around an image when printing without margins?

  I have only access to the X 2 version, here's a predetermined print schema.

  Note the Center on the page option.

  You can use the balance: option to increase or decrease the white border.

  

• black border on HP2710m

  I just bought a new computer with Windows 7 Home Professional.  IM using my HP2710m with HDMI monitor connect.  I'm getting a black border on all 4 sides to start windows.  No border is seen at startup bios screen.

  I checked and installed the latest driver for HP2710 which is indicated by its name in the screen display and the resolution is the hightest 1920 x 1080.  No vertical adjustment or horazontal found in 2710 don't set up menus.  A factory reset on the 2710

  Ideas?

  Problem solved through GPU72 thanks.  Catalyst Control Center is the new name of vision engine control center.

• Dell Inspiron 5547 black border around screen

  Hello

  I have problems with my laptop Dell 5547. There are about 1 cm border around the screen that did not exist before and I noticed now that my taskbar are settled 1 cm upward, but when I put google chrome in full screen it sort of chops to the top bar downwards a little.

  I noticed through google searches other people have had similar problems with Dell laptops, but I can't seem to find a solution because that whenever I have try to disable the scaling of display 'maintain' it won't let me turn it off.

  The product from the video has the same black border.
  It may not be "' fixed"»
  Some of these pictures seem to be which is a pretty poor form, but the screen size and resolution are as promised.
  Personally, I would have liked a smaller portable set, but if it had to be this size, then I'd rather small dials and a black border, than the large slabs of plastic from all sides. It makes it look better when sound off and I do not notice it that much.

  I also heard people say that it is do with touch functionality? Maybe it gives you a better ability to slide into the sides... I do not know.

  Yet, there is nothing wrong with your laptop. If it's a breeze for you deal, you may have a decent argument under the laws of the consumer to get a refund. They can't really show pictures that hide and make the screen appear larger is it. But the video is here, and the specifications are all honest.

• S2415H with 8700 XPS at 1920 x 1080 monitor has black border

  Hello

  I hope someone can shed some light on what I am running out of ideas and more than a little frustrated.

  I bought an XPS 8700 system, which came with a S2415H monitor.  I formatted the machine and re-installed with Win 8.1.  I have connected the monitor using the supplied HDMI interface but when I set the resolution 1920 x 1080 there is a black border around the screen; It seems that the screen size is too small for the monitor.  However, when I change the resolution 1600 x 900 as test the office fills the screen but the resolution is not pleasant to the eye.

  I tried to install the drivers from the CD, the drivers directly from the Dell website and the latest AMD catalyst.  I don't see what I'm doing wrong and so how to fix it.

  Any advice would be much appreciated!

  The scaling AMD Ati Catalyst is moved to about 7.5, which causes a thick black border around all four sides of the screen.

  * Right-click on the windows desktop
  * Left click AMD Ati Catalyst Control Center or the AMD Vision Engine Control Center
  * Along the left side, you will see my digital flat panels
  * Click on it and a submenu pulls down
  * Select Options (digital flat) scale in the submenu
  * You will see a scroll to underscan and overscan bar. Check the overscan box and drag it to 0% until your screen is filled
  * Click on apply and
  -or-
  * Right-click on the windows desktop
  Open the AMD Ati Catalyst Control Center
  * Switch to advanced mode
  * Click on the drop down at the top right graph
  * Select the desktop computers and screens
  * Right-click on currently active display. There is a little image of a tiny, tiny screen arrow below far left of the menu. It's this little arrow that you left-click on, and then click Configure. Then the following 6 keys will be at your disposal:
  Attributes
  Avivo color
  Scaling options
  HDTV support
  Screen LCD Overdrive
  Pixel format
  * Under attributes, check the GPU activate box scaling and image of the scale to the size of the whole screen
  * Click on apply
  * Select Configure
  * Click the scaling Options tab
  * Move the scale to the right until you get a picture full-screen 0%