Black box appears on the screen, don't know why.

Similar Questions

• As I try to start my computor, any dialog box appears on the screen are covered in "'

  As I try to launch my putor, any dialog box appears on the screen are covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma... I have done all the analysis and attach it to Microsoft but do I have a virus and how do I find? thxs

  .. .all dialog box appears on screen is covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma...

  The character you are evidence is a single quotation mark or tick rather than a comma, but the character you see in reality is probably an asterisk in a mask the password text box. In both cases, the problem remains the same.

  You have a key stuck on your keyboard which instantly fills any box entry with the typed characters, they are ticks or asterisks. The only audible ringer is a normal computer error indicating that the keyboard buffer is full, but entry continues, once again an indication of a stuck keyboard key.

  Try another keyboard. It may be possible to launch a key by a sharp tap, but the problem will probably persist in the future. I hope that you don't talk about your laptop.

• ERM... An exclamation point "!" began to appear on the screen of my AE - why?

  ERM... An exclamation point "!" began to appear on the screen of my AE - why?

  It does not have an impact on what either and I can't seem to find anyone else on the web that has the same problems, the only thing I'm risking to guess, what it's something to do with the Open GL, like his in the same color/font + shadow as the open GL police is. In addition, I'm stumped.

  Someone at - it ideas?

  You have installed all of the scripts?

• Dialog boxes appear off the screen

  Hello, I have problems with dialog boxes in Illustrator CS6.

  Dialog boxes are appearing in various different locations rather than a central location on the screen...

  For example: the Save dialog box appears half off the screen towards the lower right section of the screen. Various other boxes appear at the top left, top right. All dialogs are mobile, so I can reposition in the Middle, but the next time I used appear where they were not at the Center.

  I work on both a 13 "macook pro separately and with and 27" apple screen attached. Dialog boxes are visiable on 27 "screen, but often in odd places.

  Is there a way I can reset their position?

  I tried reseting all the dialogues, trashed the preferences in the preferences in the folder of the library on the computer but no luck. I'm puzzled.

  Any help would be appreciated...

  Thank you

  nosbornf,

  It is important that Illy is closed when you reset the preferences.

  Try the following (you may have tried / some of them already) and see if it helps:

  (1) close Illy and open again.

  (2) restart the computer;

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift at startup.

  4) move the folder with Illy closed;

  (5) browse and try the relevant among other options;

  Even worse, you can (if all else fails and no best answer appears):

  (6) uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Hi, my laptop had rose appear on the screen do not know what it is and how to get rid of? pls help me.nicole

  Hi, my laptop had rose appear on my screen do not know what it is and if it is normal that in laptop? Thank you, Nicole

  Hello

  If this continues, contact technical support to your system manufacturer and check their forums (if any) for known issues.

  Try a system restore before it happened. You can use the SafeMode if necessary - several times
  as you start, press F8.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -----------------------------------------------------------------------------

  If no joy you can once again tap F8 as you boot and select last good Configuration know.

  ----------------------------------------------------------------------------

  And need to update your video drivers:

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• A little black box appears at the top left of my Windows 7 login screen just before the Welcome screen and the stalls password when I try to enter. HELP PLEASE?

  Whenever I turn on my computer for a week, I try and put my password and after the first or the second key it stalls. He again entered my password, but I don't see whether registration in the password box. I also have a little black box that is slightly smaller than the size of a post-it note in the top left area of my screen for half a second, then it disappears and continues to my home screen and office as usual.

  I had this problem for about a week, and I can't understand what is the problem. I googled some things, but no one had the right answer. Someone said it was a startup with a defective software program, but I checked and I have the same 4 startup programs I've had there for a year. (DELL Wiireless WLAN Card, IDT PC Audio, Synaptics Pointing Device Driver and NVIDIA Compatible Windows 7 display driver) Everything is up-to-date and I already have Windows Update.

  * A video that I captured from my computer of this problem: http://www.YouTube.com/watch?v=GViQv-Xrm0U 

  (password stops around 0:42 and black appears at 0:52)

  Someone help? I'm paranoid that it might be a Spyware... ? None of my passwords and others are corrupted though, everything has been fine. I am making bluescreens (but not daily). I scanned with Malewarebytes and found nothing and I do that again right now. I also tried Registry Mechanic and Windows Security Essentials, but found nothing.

  I have no idea what Forum put it, this is my first time using this site...

  Model: DELL Studio XPS 1330

  Windows 7 Ultimate (64-bit)

  (I had this computer for about a year)

  The position of Bramble to drown in this issue How to start the program before windows logon user 7 Siena above [Archer] suggestion that you should study the entries in the services.

• IPod nano 7 icon appears in iTunes, with Windows 8 or IP on both computers. Two nano 5s work perfectly. Short black lines appeared on the screen iPod

  NO icon of nano 7 will appear on iTunes despite trying 2 computers, Ip and win 8. Also tried two nano 5s and several cables and ports. Also, some black lines on the screen.

  What is "Intellectual property"?  Did you mean to type XP?  There is no iPod nano "5s". are these 5th gen iPod nanos?  Why do we say "iPod nano (6th generation)" in your profile in?  It's the iPod nano with the gen 7 problem?

  If the 7th gen iPod nano is new (model 2015), it does not work with a version of iTunes that runs on Windows XP.  It should work with the current latest version of iTunes on the computer of Windows 8, however.

• Error message from Windows XP in black box appears at the beginning upward

  Hi all, I have a problem... again. I downloaded DOSBOX to play a retro game, I didn't need in the end, but I tried to use it to start the game. Since then, when my laptop starts a little black box is displayed that contains the following text:

  SSDIAG enabled

  new_DIAGWINDOW (DrvnQ117)

  delete_DIAGWINDOW (DrvnQ117)

  new_DIAGWINDOW (DrvmCDB)

  delete_DIAGWINDOW (DrvmCDB)

  new_DIAGWINDOW (Drvnppqt) I think that it's a q but maybe it's a it's really small to read

  delete_DIAGWINDOW (Drvnppqt)

  I would really appreciate help on this I have no idea how to solve this problem. Thank you in advance, I know that you guys will help me if you can. What about Ros

  [Moved from comments]

  Maybe http://www.delphifaq.com/faq/spyware_virus/f1553.shtml?

• Tablet of width setting of no stretching of the screen - can not know why not

  I created two different files of Muse.  One is for phones and one for tablets.  I could have done both in a single file of Muse, but because I'm creating for the audiences of the difference, it's why I did two different files of Muse.  Here are the settings of the phone and Tablet

  

  

  I've got perplexed me when you view the version phone on a phone, the edges work perfectly on the screen of the phone.

  But when you view the version of the tablet on a Tablet, for some odd reason, the edges of the pages extend to the width of the tablet device.

  Because I used default settings of Muse, I thought that it could automatically fix the width by each device.  Someone has an idea what I am doing wrong?

  Thank you.

  Hi Mike deaf,

  Maybe it's not your problem, but almost every time I have a design on any format (office, phone, Tablet), where the content is not completely filling on the edges of the screen, I usually give a parasitic element or a text box which the container is stretched outside my frame.

  I came on a quick tutorial a little while back that very clearly explains this common problem:

  Site Web of Adobe Muse tips - vertical scrolling of Bugs fixing

  Hope that helps!

• I work to integrate AD with ADC, but there are a few users that does not appear on the ADC. Someone knows why?

  I have an ASA 5515 with module CX and I m trying to configure rules based on users of the AD. I have instaled CDA (context Directory Agent) and is integrated with AD and module CX and ASA and I have also set up rules on the ASA and module CX and works well. The problem I have is with users who does not appear on the ADC. When the user is on CDA is OK. But I should have more less 250 users on CDA and I only 171. I restart PC users doesn´t appear and after reboot, some users appear and others do not. Anyone know why this behavior?

  rgoncalves

  You can check a few things? Software version CX and your version of the ADC? Also do you have more than one domain controller in your environment? Also what version is DC?

• When the computer starts a dialog box appears on the screen, the title of box - Windows Product Activation - it's authentic? (details below)

  The message says:-since first, windows has been activated on this computer, the computer hardware has changed a lot. Because of these changes, Windows must be reactivated within 3 days. You want to reactivate Windows now?

  That sounds like a real message, or would it be a virus?

  There are months that additional memory has been added on the hard drive.

  It looks like a real message and that activation glitch sometimes. Go ahead and turn on the computer. MS - MVP - Elephant Boy computers - don't panic!

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• The screen is unresponsive. An orange box keeps appearing on the screen. Hardware or software problems? Solution?

  Tel: Geeksphone peak. Overview of the developers.
  The screen vibrates when they are affected, but no response is received. Orange box, I suppose, a background work any appears on the screen. Any help would be appreciated. Thank you!

  Hi all

  Thanks a lot for taking the time and effort to help me. I'm very grateful for that. The thing that worked for me tried a soft reset by pressing the power button and volume buttons, and then restore to the factory settings. I hope that it works for anyone who might encounter the same problem. Thanks again!

  Dilly.

• Press and hold Ctrl/Alt, then press on delete, and select Start Task Manager, and then the small black box appears and then disappears.

  Press and hold Ctrl/Alt, then press on delete, and select Start Task Manager, and then the small black box appears and then disappears.  How can I fix the Task Manager?

  Hello

  See if that helps you.

  "The problems of Task Manager.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  See you soon.

• Pavilian DV 5: line double black has just appeared on the screen

  double-line horizontal black has just appeared on the screen. What should I do and it is good to be used the machine with the problem?

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are having problems with your laptop display. We will surely help you with this problem

  1. Please check if the display screen / laptop showing black double lines even in BIOS or not

  Note: Turn on the computer laptop and typing on the F10 key to access the BIOS

  2. Please tilt the laptop display slowly to the back and the front, check and check

  If the black double lines are visible to all the corners of the screen

  3 Please connect an external monitor to your laptop and check if the double black lines appear even on the external monitor

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on Thumbs Up white on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP