Black monitor and remains black - hardware or software issue?

Similar Questions

• How to enter the bios and virtualization of hardware (or software) turn off? On Hp 3400 mt series

  I have HP 3400 MT SERIES

  motherboard: Foxconn 2ABF 1.20
  Version of the BIOS FRIEND brand: 7.14

  How to get into bios and disable (hardware or software (I don't know)) virtualization that I have to open mac osx 10.7 in vmware

  Enter the BIOS and look in the Security section, as shown in the image below. If that's what you see, then activate the virtualization technology and it's done. You will be able to use Sun's VirtualBox and other virtualization programs later

  

  Best regards

  ERICO

• Shell script to monitor and alert DB support TBS space issues

  Hello:
  
  I am looking to build a shell script which would basically be to connect to the database using tnsnames.ora and check the availability of space on each of the storage space in a database. Send an alert message to dbsupport if it is less then a specified threshold value. Y at - it a script that you can share it with me.
  
  Kind regards
  
  BMP

  I would like to know if it works... or if you have any problem... Let me know...

• Windows could not start. recent hardware or software change might cause this

  Recently, I have reactivated my antivirus norton on my netbook. He told me that I needed to restart, when I went to shut down my computer, it says that there are 45 updates as necessary to update and do not turn off the computer, because after the updates, it turns off automatically, he did through the first 40 of 45 in about an hour and I finally had to go to the bed woke up he said 40 of the 45 updated installation... then my computer is dead. When I went to turn it on I got the black screen that says: cannot start Windows and a recent hardware or software change might have caused this, and it gives all the boot options. ... safe mode safe mode with network etc. I tried to start windows with all the options. It goes to the windows start page and then click on return to the failure to open the page. What should I do?

  Hello littlal

  If Windows does not start even in Safe Mode you will need an XP installation CD for this problem.  Borrow one if necessary to run this fix

  Then

  Configure your PC to boot from the CD if it is not already configured in this way. You may need to enter the BIOS to configure the PC to boot from the CD.

  Set the boot order of

  floppy (if present)

  CD/DVD-ROM

  Hard drive

  RECORDING and EXIT

  Start your PC with the XP installation CD in the drive. When you see the prompt «Press any key to boot from CD...» ", do and start the process to boot on CD.

  When the Recovery Console option is available (press R to start the Recovery Console), do it. You may be asked to what Windows installation to enter, what kind of cases the number of the Windows installation you want to work (usually 1).

  When you are prompted, enter the password for the Windows installation. If you have not set up a password just press ENTER

  At the command prompt, type

  Bootcfg /Rebuild

  Come in

  The exact wording depends on your configuration, but after a few moments, you will see a prompt that displays something like:

  Total identified Windows installs: 1
  [1] C:\Windows
  Add Installation to begin the list?

  Assuming that the information see you is correct, enter

  THERE

  Bootcfg will start the process of reconstruction of the startup list to include the specified Windows installation

  After a while, you will be asked to "Enter load identifier".

  Is the name of the operating system that will appear in the start menus.

  Type

  Microsoft Windows XP Professional

  or

  Microsoft Windows XP Home Edition

  Come in

  Then you will be asked to "Enter OS Load Options."

  For normal installations, enter

  / Fastdetect

  Come in

  Type

  Output

  to exit the Recovery Console and restart the PC

  .

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Vista desk top of page monitor screen remains black when the computer wakes mode standby

  Windows Vista Edition Home Premium

  Dell desktop

  Intel Q8200 @2.33 GHz processor

  6.00 GB RAM

  32-bit operating system

  Type of card ATI Radeon HD 3450

  Driver update has been installed without any problems.

  When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.

  Hello

  Please provide information for a better understanding of the issue.

  1. what was the recent change in hardware or software performed on the computer before the question?

  2. are you having the same problem when you Hibernate the computer?

  Check the display driver for power management problems.

  Method 1

  Check if allow this device to wake the computer is checked in the Device Manager.

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. Select graphics cards, it will display your display driver, right click and select Properties.

  c. Select the power management tab.

  d. check the allow this device to wake the computer check box.

  e. repeat these steps for the network adapters and the mouse as well.

  If the problem is not solved then continue to.

  Method 2

  Remove both power on your computer and check to see if that fixes the problem.

  Reference:

  Change, create, or delete a power plan (scheme)

  Try to create another plan of the power of your computer and check if the problem persists.

  Power plans: frequently asked questions

  See also (additional links for more information),

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blank-screen-after-Vista-went-on-sleep-mode/b5e5693a-28a6-4391-b9ac-36d345d6a3b9?msgId=a464f2ec-0651-4E2F-8CB0-f546b09b0989

  Hope this helps

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039

• When I start the software Black Berry via the Office to receive the error message "the Black Berry Desktop software has encountered a problem and needs to close. We are sorry for the inconvenience. »

  Original Titus: cannot install software blackberry "BOLD"

  When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:

  Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.

  If you were in the middle of something, the information you were working on might be lost.

  Please tell this problem to Microsoft.

  We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.

  End of quote

  What data means this error report contain?

  Why should I report to Microsoft?

  I received error below during the repair software blackberry

  Quote: The path:

  ' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product

  End of quote

  No path

  Hi ZiaHL,

  Try the steps listed in the article mentioned below and check if it helps you to fix the problem:

  "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process

  http://BTSC.webapps.BlackBerry.com/BTSC/dynamickc.do?externalId=KB10340&sliceId=&command=show&forward=nonthreadedKC&kcId=KB10340

  You can also view the article mentioned below for more information:

   

  BlackBerry Desktop Software issues fixed in this release

  http://docs.BlackBerry.com/en/Admin/deliverables/20936/BlackBerry_Desktop_Software_Fixed_904527_11.jsp

  Let us know if that helps.

• Windows 7 update everytime I open Chess Titans I have to turn the Board at my side. I'm black and it opens always white, take the 1st pass and remains there unless I smile it 180 degrees

  original title: Chess Titans little Caprice

  Windows 7 update everytime I open Chess Titans I have to turn the Board at my side. I'm black and it opens always white, take the 1st pass and remains there unless I smile it 180 degrees.

  Hi Woody15380,
  
  Chess Titans walk and check if that helps
  .
  Use this link to turn off the game and then turn on again.
   
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Also delete all the files in C:\Users\user name\AppData\Local\Microsoft Games\Chess Titans
   
  Aziz Nadeem - Microsoft Support

• I tried to reload XP using my drive but it failed due to a hardware or software problem, XP is stuck in a loop and does not load. How can I clean my disks and reload XP?

  I have a HP XP of 2005. After a year of use of a premium support tech, my OS must be installed.

  I used the disk and followed the installation steps. I received a message on there was a hardware or software that would effect the install and may not work properly. In any case, I continued and of course I am stuck in a loop.

  I can't go to my office.

  First of all, I get a notice on a black screen to select the operating system to start. There are 2 identical choices. Microsoft Media edition.

  Once selected, a screen appears. "We apologize for the inconvenience, but Windows did not start successfully.
  a recent hardware or software change might have caused this. "

  I have enough to make choices and none work.

  1. choose the last known good configuration to return to the most recent settings that worked. :

  2. do not apply

  3. There is a selection in the Safe Mode with command prompt and if I had used the F8 key to reinstall this option would have worked. To do this, do not hurry.

  what I get is a list of drivers that are installed.

  I'M IN A LOOP BETWEEN CHOOSE TO START WINDOWS WITH MICROSOFT XP THEN A NEW SCREEN APPEARS, WHATEVER I HAVE THAT LISTS THE CHOICES ABOVE.

  I need help reload my OS and wipe the hard drive clean. Is there a software I can download to help?

  Hi btbtms,

  You can follow this link to find out how to install Windows XP on your computer.

  How to install or upgrade to Windows XP

• Black Berry sync software unable to Synch with Yahoo

  My Black Berry Desktop software Sync used to work perfectly, backup and sync phone Contacts and calendar with Yahoo. Now it errors when it tries to synchronize the calendar with the server connection is lost. The version is up-to-date.

  Hello

  I recommend you contact the support team of Yahoo for help on this issue.

  http://answers.Yahoo.com/

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• •To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  You need a DVD decoder.  Maybe VLC media player will work.  If this isn't the case, you will need to buy a program to read these files (or DVD) on your computer.

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• How to calibrate the screens of Adobe products? For the most part, I'll use Illustrator and Photoshop.Can someone make a difference between the calibration and the Hardware calibration software using (Spider)? Thank you.

  How to calibrate the screens of Adobe products? I will mostly use Illustrator and Photoshop.Can make all the difference between calibration and the Hardware calibration software using (Spider)? Thank you.

  I use U2415 from Dell.

  I use the Spyder Pro 4. The process is quite simple - install the software, plug the Spyder and follow the steps listed in the program. I would recommend also, install the latest version of the software directly from the site of Datacolor instead to install from the disc supplied (probably outdated).

  Benjamin