Shell script to monitor and alert DB support TBS space issues

Similar Questions

• Navigator 1.2 infrastructure monitoring and alert

  I was under the impression that the Infrastructure Navigator made monitoring and alert services and applications where if something doesn't work more or had problems he can inform you through something like the email or SMS, etc.. From what I've seen, it seems that it only shows you what services are running on a virtual machine and the dependencies with other servers. Is this the case or am I missing something?

  You are right. vCenter Infrastructure Navigator is a discovery of the application, mapping and dependency visualization solution and not a demand one performance management.

  vFabric Application Performance Manager (APM) provides a complete application of the surveillance capabilities. APM settles with two components: vFabric AppInsight of Transaction and Code level followed (byte code instrumentation is courtesy of spring Insight) and vFabric Hyperic for middleware and OS monitoring.  More details and example of using hyperic within the MPA can be found here: http://bit.ly/MsO5Dl

• vm Monitor and alert services

  is there a way to monitor windows services specific vm and alert based on down?

  Currently, it is not possible.

• Monitoring and alerts

  Hello

  I want to send my alarms trigged in vSphere mail, how do I do this?

  Tobias

  Hello

  STEP 1 : go to the level of the vSphere infrastructure that you want to create an alarm on. If it's on a particular virtual machine, go to the tab alarms on this virtual machine. If it's for all hosts in the datacenter, switch to the display of data center and then click Alerts.

  STEP 2 - go to the view of alarm definitions

  STEP 3 - right click, and then click new alarm

  STEP 4 - give a useful and descriptive name (yours and others) the alarm and select the type of alarm

  STEP 5 - choose between monitor for conditions / State and monitor for specific events and go to the next tab, triggers

  STEP 6 - Add a new trigger. Set the Type of trigger, Condition, cautions and alert levels. Note that this may take a few adjustments over time to get the warning and correct the warning levels. The reports tab is optional, but you must switch to the Actions tab.

  STEP 7 - Add a new Action. This could be for send you by email, a notification, SNMP trap, or execute a command. Let's say that you set up the alarm in order to send you email, you must enter your e-mail address in the configuration. When you are finished, click OK, and you should see the result of your work in the view of definitions of alarm.
  Figure 8: Creating a new vSphere alarm

• Calling shell script program SQL and passing parameters

  Hi guys,.
  Greetings from Toronto. Is it possible to move one or more strings as parameters to a sql from shell script program?
  
  Shell script

  # Accept system input parameters
  p_user_id=$1
  p_job_id=$2
   
  sqlplus.exe -s $p_user_id @$RD_PATH/rd_test.sql $p_user_id $p_job_id

  SQL program (rd_test.sql)
  

  -- Accept system input parameters
  define p_user_id = &1
  define p_job_id = &2
  
  -- Wondering if its possible to pass these 3 parameters from a shell script program.
  -- (1) rd_test-$p_job_id-3-1.lis
  -- (2) RD_PRINTER(rd_test,3)
  -- (3) t_data
  
  select
  t_data=''rd_test-'||'''$p_job_id'''||'-1-1.txt''
  t_data_dir=''.''
  ksh $RD_PATH/another_shell_prog.sh $p_user_id $p_job_id '||a.rd_value||' '
  ||b.rd_value||' rd_test-$p_job_id-3-1.lis $RD_PRINTER(rd_test,3) '||
  '$t_data $t_data_dir'||'
  exit_status=$?
  check_command'
  from rd_job_parameter b, rd_job_parameter a
  where a.job_id = &2
  and a.jp_module_id = 'RDTEST'
  and b.job_id = a.job_id
  and b.module_id = a.module_id
  /

  As always, this is not something I have to solve that minute. Any help would be appreciated
  and I will think of the problem.
  
  Thank you
  REDA
  
  Published by: Raj404261 on June 25, 2009 11:40
  
  Published by: Raj404261 on June 25, 2009 17:29

  OK, just a few pointers possible if you need to go the way of shell script.

  I suggest that you have a separate SQL script for each of your options, which retains the fairly well-defined lines and keeps the maintenance as simple as possible. Therefore, in your shell script, you can have something like:

  #!/bin/ksh
  # Accept system input parameters
  p_user_id=$1
  p_job_id=$2
  
  # Deduce which script you'll call here
  # using if statements, or even a case:
  
  if [[ p_job_id -eq 1 ]]
  then
    SQL_SCRIPT=sql_script1.sql
  else
    SQL_SCRIPT=sql_script2.sql
  fi
  
  # Or using case
  
  case $2
    in
      1)     SQL_SCRIPT=sql_script1.sql;
  
      2)     SQL_SCRIPT=sql_script2.sql;
  
      3)     SQL_SCRIPT=sql_script3.sql;
  
      *)     SQL_SCRIPT=sql_script4.sql;
  esac
  
  export ${SQL_SCRIPT}
  
  #If you need to query the database at all to deduce which script to cal
  #Then something like this:
  
  SCRIPT_VAR=`sqlplus -s username/password << EOF
  set heading off
  set feedback off
  set verify off
  SELECT * FROM DUAL;
  EOF`
  
  export {SCRIPT_VAR}
  
  SQL_SCRIPT=sql_script${SCRIPT_VAR}.sql
  
  # Then just call your script:
  sqlplus. -s $p_user_id/password @${SQL_SCRIPT}
  

• implementation monitoring and alerts SLA through the Workspace studio

  Hello
  Is it possible game of replicas and alert rules SLA through the studio of the workspace. If so, could you please help me how do.
  Thank you
  James

  Hello..

  Operational parameters such as active, tracing, monitoring etc. are easily defined within eclipse by editing with the text rather than the proxy editor editor...

  SLA alerts are possible to change in the same way, but they are a little more complicated to understand.

  .. Select this option.

• Can ISE monitor and alert for status n?

  Hi all

  Can someone tell me if the ISE server can monitor the State of n?  If a n goes done, ISE can send alert by e-mail or SMS?

  Thank you.

  N ° Ce would be a function of a network management system.

  Offer of Cisco in this space would be first Infrastructure. You can also use any number of cheap (and some tools open source) like Nagios or what to do simple up/down controls.

• Black monitor and remains black - hardware or software issue?

  
  

  I have already suggested you.

  I never had to install a driver of monitor, video projector (Spotlight presentation), HDTV or LCD display. LCD screens are sometimes delivered with driver discs, but the views are also not Plug Play devices. This is why the operating system recognizes and installs the drivers as required.

  The following image is a screenshot of this desktop PC Device Manager. It has two screens connected as you can see. I haven't installed any drivers. Try uninstalling the driver to see what effect it a. let the OS do its job.

  

• Stop the Service Console and shell scripts

  Now that VMware announced ESX 4.1 is their last hypervisor with a service console, I was wondering-

  What are the options to make what is now a large number of Linux shell scripts perform the same functions on ESXi - i.e. PowerCLI, Host Profiles, etc. and how long we have until officially support chips for the ESX service console?

  Thank you

  PowerCLI does not rely on a service console. However, you must have paid the ESXi version for them to work.  With respect to the profiles of the host, which is a characteristic of vCenter and has more no dependencies on the COS.  You can start watching to convert all of your shell scripts PowerCLI and use scripts.

  What about when VMware will stop support for ESX, I do not anticipate happening any time soon.

• shell script for oracle alert.log file

  Hi gurus,
  
  I want to write the shell script to know the last timing 10 stop of the database of the alerts log file. I'm working on oracle 9i.
  
  Could someone please advice on that.
  
  Thanks in advance
  
  Kind regards
  Shaan
  
  Published by: Shaan_dmp on January 5, 2009 13:27
  
  Published by: Shaan_dmp on January 5, 2009 13:28

  Use awk. I have not at hand a 9i but here is a very simple version for 10g XE

  My awk file (line numbers for the notes below - don't include them):

  01:BEGIN { prevline = "";} 02:03:/Completed: alter database close/ {print prevline,FS,$0;}04:05:{prevline = $0;}
  

  The command line and the results (from my alert log 300 k)

  $ awk -f alert.awk.txt alert_xe.logFri Apr 11 18:08:40 2008   Completed: alter database close normalFri May 16 18:53:21 2008   Completed: alter database close normalTue May 20 17:28:23 2008   Completed: alter database close normalThu Jul 17 19:08:52 2008   Completed: alter database close normalFri Aug 15 15:12:48 2008   Completed: alter database close normalWed Nov 05 08:52:59 2008   Completed: alter database close normalFri Nov 14 16:36:03 2008   Completed: alter database close normalTue Dec 09 10:46:23 2008   Completed: alter database close normalMon Jan 05 11:12:22 2009   Completed: alter database close normal
  

  What it means:

  (1) section START line 01 defines the variable to contain the previous line
  (2) the /search chain / line 03 search marker in the file for a stop, and then performs the requested action (print the time that was in the previous line and then this line; use FS (the field to the awk - space normally separator) as a separator
  (3) on line 05 is a statement that we do on each line - is remembered in case it is the timestamp for the closure.

  Now, you can include several cases corner for closures by adding several models of research etc. For more information, google for examples of awk.

  AWK is really good at this sort of thing!

  HTH

  Nigel cordially

• Get the progress and result of a shell script

  Hello

  I would use a shell script to convert MP3 / audio FLAC files MP3 files with a bitrate of 192kbs and do other things in Automator or AppleScript script.

  So I installed lame and flac with brew, run an Automator process with a selected file and perform an action of AppleScrip:

  on run {input, parameters}
  
    if input is not {} then
  
    repeat with theFile in input
  
    set posix_file to POSIX path of theFile
  
    if input is not {} then
  
    tell application "Terminal"
  
    set thescript to "/usr/local/bin/lame -b 192 \"" & posix_file & "\" "
  
    do script thescript
  
    end tell
  
    end if
  
    end repeat
  
    end if
  
    return input
  
  end run
  

  The Terminal window is there because you tell the Terminal to run your script - try using shell script.

• AppleScript and shell scripts

  I'm on Mac OS X 10.11.2 and have problems with AppleScript and shell scripting.

  The following script is a cutting of a larger project:

  Tell application "Finder".

  the value the_MePath (path for me)

  the value the_MeCont (the_MePath container) as string

  tell the end

  the value of the_MeCont (text 1 thru-2) the_MeContShell

  -normally isn't here!

  the value the_MePara (the_MeCont & "STH - C Para WAV_48k_24.txt")

  the value the_Parameters (opening for access file the_MePara with permission to write)

  write ("WAV\r24\r48000\r48k\r") the_Parameters

  Close access the_Parameters

  -normally isn't here!

  -destined to be there!

  -the value the_MePara (shell script 'find' & city form the_MeContShell POSIX path & "-iname" "Para STH - C *'")

  the value the_Parameters (opening for access file the_MePara)

  the value the_ParaList (read the the_MePara file)

  Close access the_Parameters

  paragraph 1 of the value userFormat the_ParaList

  paragraph 2 of the the_ParaList the value userBitDepth

  paragraph 3 of the the_ParaList the value userSampleRate

  paragraph 4 of the the_ParaList the value shortSampleRate

  The lines between the "-normally isn't there!"-lines fills a file in the directory of the AppleScript with the data.

  So now the file is there.

  If I remove these lines and enable the line below "-intended to be here! ', the shell should find this file.

  What I get, then, is a mistake:

  "Fehler beim Zugriff auf das Netzwerk." error number - 5000 file "/ users/shared/_AppleScript development/_Archiv Sniplets/STH-C Para WAV_48k_24.txt" to "class fsrf".

  to "open for access file the_MePara.

  Any ideas, anyone?

  Kind regards...

  ... Maik

  Hello

  Remove the end of file before the_MePara.

  the_MePara contains a posix path type path--> "/ users/shared/_AppleScript development/_Archiv Sniplets/STH-C Para WAV_48k_24.txt.

  You can use the file on the path of type HFS --> ' StartupDiskName:Users: shared: _AppleScript development: _Archiv Sniplets:STH - C Para WAV_48k_24.txt.

  Information:

  The script didn't need to open and close the access when the script to read-only.

  Use this line only--> the value the_ParaList to read the_MePara

• Insert a record, call a stored procedure and execute a shell script

  Hello

  I am trying to build a page APEX do these three things in order.

  #1. Insert a new record in a database table (pk, donnees_xml, attr1 and attr2, etc.) and download the XML file to the donnees_xml column

  #2. Save this XML file on a file system

  #3. Parse the XML file on a file system and update the database with the parsed data table

  I can do #1 with a regular shape based on the database table. I can do #2 with a stored procedure.

  I can do #3 with a shell script.

  I wonder how these tasks can be combined into a single action in APEX.

  do #1;

  If successful, do #2;

  If successful, do #3;

  I'd appreciate comments on this.

  Thank you

  Define a process of PL/SQL page submit that runs after the record is inserted, if P1_FILE is not null.

• Call the batch file and not the shell script using measures of the event

  Can I use EVENTACTIONS at the door of gold like

  eventactions (SHELL, /path-to-batch-file/test1.bat)

  will this work? I am on a windows machine, so I need to run a batch file and not a shell script

  In GGSCI, you can shell OUT to the BONE and call a command/executable file.

  For example on Windows:

  GGSCI (WIN2003) 2 > shell dir

  Volume in drive C has no label.

  Volume serial number is 8CCC-9E58

  Directory of C:\ggs

  18/08/2012 07:23

  .

  18/08/2012 07:23

  ...

  2010-10-15 06:37 bcpfmt.tpl 426

  2010-10-15 06:37 bcrypt.txt 1 725

  22/04/2011 03:41 2 560 category.dll

  05/11/2011 10:43

  cfg

  2010-10-15 07:15 739 chkpt_ora_create.sql

  ...

  What were the results when you tried this in an EVENTACTIONS clause?

• The work of the Disqualification of Linux Shell Script

  Hello

  We are the 11.1.1.7.3 with Weblogic Web server and Linux App Server Disqualification.

  I want to know how we can carry out the work of the Disqualification of the Linux and write these commands in the shell script.

  (1) present the task (run)

  (2) check the employment status to see if the work is in working condition or supplement

  I know that on Windows, it utility jmxtools.jar of command line operations in dnDirector/Tools folder. But I'm not able to find the jmxtools.jar file in one of the edq.home or edq.local.home of the directories under Linux install.

  Can you guide me to the location where the jmx utility will be available under Linux and also the command to check the status of the job?

  Thank you

  Ravi

  It's him!

  Jobs called via the command line interface return an exit status when finished.

  Monitor the precise status of the long-term work requires the use of the server of the Disqualification Console user interface.