Black screen, no BIOS, no beeps...

Similar Questions

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• No black screen, good Bios, no mode without failure, no. Cursor, no idea

  I turn on the computer, it goes straight to a black screen. No beeps, no cursor, it will go to the safe mode screen but fails to proceed after all selection. It goes also to the bios screen. Any suggestions? Maybe an easy solution?

  If you cannot boot to the last known good configuration, then go to another computer and find SpotMau on web and create a bootable floppy (it's a little money but I save several data of the computer, this passing - boots to a system based on linux from the CD menu). You will need an external hard drive to back up your data to-you may be able to restore the system using a recovery disk. Or replace the hard drive and reinstall using the operating disks that you created when you backed up.

  However, FIRST thing to try is to remove all the devices of the system (unplug all USB drives and printers etc.) and then restart.

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite A200-1fj - black screen after BIOS update

  Hello guys,.

  I'm planing to update my bios for this version

  http://support.toshiba-tro.de/tools/EULA/calleula.asp?ID=63108

  and my pc got little froze and lag then I close the program that has Flash my bios and restart my turn then black screen... I search and found this thread talking about the BIOS recovery and there seemed not workin for me (I use my 8 GB flash memory) and just do Fn + B when I press the power button to start and then the power led becomes orange... and nothing happens...

  Everyone please provide me the bios file just for this model and give me a clear instruction to Flash my bios with my flash (8 GB) memory

  W8 your replay guys, thx

  + The message was edited: link removed - unauthorized 3rd party Forum +.

  If the BIOS update was not properly flashed, the ROM should generally be flashed with a disc of crisis of the BIOS.
  This can be done by authorized Toshiba available in your country.
  Then get in touch with the ASP to solve this problem.

• Satellite L450 (PSLY0E) - a black screen after BIOS update

  It seems I have "brick" my phone during a bios utdate that went wrong... black screen as suspect: o.

  The laptop is a Toshiba satellite L450 (PSLY0E)
  The new bios image is named "bwaa150a.rom".

  Anyone know if it is possible to recover the bios of the flash or floppy drive, using a sort of toolfrom recovery inside the bios chip?... .or something?

  Anyone know who is the manufacturer of this bios?
  If I rename the bios image during a recovery, what 12xxxxx be named?

  To my knowledge, it is possible to reflash the EPROM module using the special procedure of crisis of the BIOS. But this crisis BIOS disk for Toshiba computers laptops isn't available for download.
  This must be done by authorized maker Toshiba.

  But I also read in the forum about those who tried some discs of crisis 3rd party BIOS.
  Sometimes it worked, but in most cases, you need advanced help technician.

  However, to use the forum search option advanced to search for similar topics on crisis disk BIOS. Otherwise, as I said above: you last chance might be the ASP.

• Satellite L350 - 170 Vista black screen and strong continuous beeps

  Since an update of windows who has not completed, the pc does not start.
  After the first page, it goes to a black screen and beeps very. I don't have a recovery disk when I bought the pc.
  Have tried with recovery Vista downloaded, holding the key F8, it happens where you can choose the repair of launch, it launches the application, but then after a few seconds it stops and starts beeping again.
  Is there a recovery cd (download) I can get for this PC and how to fix this?
  Thank you

  What happens if you try to start Windows in safe mode and delete update (s)...

  > Is there a recovery cd (download) I can get for this PC and how to fix this?

  There is no free download link, you can buy a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba you can also do a new install of Windows since Windows copy disk.

• Satellite C660D (PSC1YE) black screen after BIOS update

  I tried to update my Bios on my Satellite C660D portable (psc1YE) last week (big mistake).

  Something went wrong during the update and now when I power on I just get a black screen (LEDS and fan).

  After reviewing, the conclusion is that I damaged the BIOS that must now be blind flashed.
  So I got the hand on a 512MB memory stick, formatted using FAT through windows XP and used Wincris to create a startup disk after you have added the file bios.rom (renamed Bios.wph) which I extracted the last update of the BIOS on the Toshiba site.

  My memory stick has three visible files on it, Phlash16.exe, bios.wph and minidos.
  I plug laptop with battery, DVD player and power disconnected to stick, and hold Fn + B re-connection cable cable, turn it on.

  The fan whirs at full speed, and the USB lights up and flashes then for a minute, as if being read. No matter how long I let on, the fan will continue whirring and the USB is on and when I unplug and put in still works a black screen.

  I tried different sticks, (up to 4 GB with FAT32 format), programs of different startup (for example, the HP utility) drive but still no luck.

  Can someone tell me what I do wrong? I tried to look for a newer version of Phlash16 just in case that was the problem, but can not find one any where (mine is version 2008)

  All advice would be greatly appreciated even if it's just to tell me that I'm wasting my time because the pc is not repairable.

  I can't tell you if you waste your time or not because I n know if the motherboard ROM module is OK or not

  In most cases, it should be possible to reflash the ROM module using the BIOS crisis disk but this disc is available to authorized Toshiba service technicians and as much as I know reflash this methods is not always the same

  However, in some cases it might be possible that the mobo could not be fixed by disk crisis, it would be the worst case

  I recommend you to contact a certified maintainer Toshiba to check guys would be able to use the crisis disk and could test whether its possible to reflash the module ROM
  Is it not would be not possible well in this case you would need new motherboard :(
  But lets hope do ' t you need...

• Satellite A200-130 - had black screen after BIOS updated

  I have Satellite A200-130 I install a windows Vista OS with success and after that, I have saved all the driver I DOWNLOAD and put on a single folder... but then I accidentally open the configuration files of the BIOS that is "setup.exe" with the file "skae180a.rom".

  BOS update starts automatically and I can't cancel it because my keyboard doesn't work simply do not. Then the update fails. I tried to restart my laptop using the touchpad and after reboot I just get BLACK SCREEN and HD led flash just once and my CD/DVD drive is displayed for 5 seconds and nothing happens.

  Now my laptop remains the same... just 'black screen '.
  Can someone help me on this matter? I really need this laptop to be repaired.

  Hello
  I had exactly the same problem with my laptop A200, I spent so much time looking for a solution to this, I tried all the solution I got the net fourms but not at all, 100% bios chip be changed by ASP.
  UOP now I'm not sure that the A200 bios chip can be changed or I have to change all the Mo.
  I'll send it to ASP.

• Satellite C660D-1F2 - black screen after BIOS update

  Hello

  I have download the Bios Toshiba by writing my serial number for my laptop.
  First I checked my current bios and it is 1.5 I think. The news was 1.60. I flashed on WIN 7 64 bit
  First he checked, he erased and then he wrote after the writing process, the laptop is a reboot automatically. But after that the laptop closed and propelled again, he stuck to a blank black screen. Fan, CD Rom, keyboard worked. I think too many USB because when I connect my phone to the laptop, my phones battery charge. Please I need help. I am out of warranty.

  What I've tried so far:
  Take out the battery
  Power cable plug out
  Hold down the power button / stop 1 minute
  Connect the power cable to rear
  Press the Power button
  Solution: Same; Black white screen

  Satellite C660D-1F2 (PCS1YE)

  Hello

  I'm afraid that something goes wrong with the update of the BIOS, and now BIOS is damn Mr. usually in this case you need professional help from Toshiba service but it can be quite expensive.

  On this forum, you can find many discussions where people have described the same problem. Some of them have been able to solve this problem. a very interesting thread, you can find here. Check it out please.

• Satellite L40 - 14 H - black screen after BIOS update

  Hello!

  I have laptop Satellite L40 - 14 H (PSL48E). I installed Windows XP, it worked fine, except the keypad is lit permanently so I couldn't enter a few symbols. I decided to install the special BIOS for WinXP, which downloaded from the Toshiba web site. The PSL48x model is in the support list. Change the windows flashing and reboot, I entered the BIOS to see what has changed. I saw nothing new, so I leave the WOOD and restart again.

  Since then, turns on the phone, but the screen is not, it is black :-(((
  Please help me, how can I save to live?
  Thank you, Eugene.

  Tried to connect it to an external monitor?
  If this does not help, you will need to go to a SPA to take a look at your machine.

• Yoga 2 Pro Black Screen after Bios Update

  Only, I have formatted my yoga 2 pro, downloaded the drivers and ran the update of the Bios. I followed the instructions on playing ran me the .exe, one click on next/ok until you restart the laptop and if I'm not mistaken a menu red with a progress bar appeared. At this time, I left and when I came back a few minutes later, the laptop is on, the lighting of the screen was on but the screen was black, the backlight of the keyboard was also turned on and everything else was off. Lights on/near the switch indicating if there turned on and connected to the AC are off.

  It was like that for more than 30 minutes now, no sign of progress. This happened to someone else before? I'm not very keen on must turn off or unplug the laptop while flashing the BIOS, but at this point there is not much else I can do.

  I found the answer to my problem to

  http://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/yoga-2-BIOS-update-crash/m-p/1322487/high...

  Now that I found this post, I remember the instructions telling me to turn it off manually when I've updated the bios earlier this year. However, these instructions don't mention about it, maybe they should be updated?

• Black screen after BIOS windows computer acer laptop 10

  Hello

  While I was watching a movie, when I watched, my webcam from nothing.

  I watched the movie again. then a box of AVG showed, I didn't know what he was saying.

  then my screen went black, I put my laptop, I did it again. the screen acrer showed, after that, there was a screen with this:

  _

  logo: _ flickered, I can go in F2 and F12 only nothing more.

  Now, my laptop makes weird beep is HEARD after 5 seconds

  Please help me!

  error?

  Uh, it says this:

  Cannot transfer recorded messages to the event log with status 50

• Re: Satellite L735-158 - black screen in BIOS update

  Hi all

  I have not found a solution to my problem anywhere, so I'll try here.
  I was going to update the Bios on a Satellite L735-158.
  I went to the Toshiba´s website, downloaded and follow the instructions... but the app. 15 seconds after double-clicking on the file of orders... some sort of sign of error came.

  The computer "locked" and then the screen is dead.
  When I turn on and off with the switch, I can clearly hear the computer works (although strangely), but the screen is dead.

  Can anyone here help?

  Thank you
  G

  Of course the EPROM module where the BIOS is stored was not flashed properly.
  Something went wrong during the update of the BIOS and the module is bad.
  I suppose that the update procedure using the special crisis disk BIOS help you solve the problem.

  But in most cases this procedure must be done by Toshiba ASP.

  Alternatively, you can search the forum for a few similar discussions on the crisis disk BIOS here.
  Some users where it is able to solve this problem by using some 3rd party disk but it doesn't always work.

  So is probably that you last chance to repair the ASP from Toshiba

• Satellite L350, mette, black screen, no BIOS, no splash screen

  Hello

  I am a professional (DHL Aviation)
  I support a user that I advised to buy the Toshiba because of my great experience with it.
  Laptop is about 3 years - W7 Ultimate.

  Problem: computer laptop is not starting at all, screen remains dead, only powerlight and fan says he works. No BIOS screen options, no Toshiba welcome screen, nothing...

  Laptop MOBO power. Power light is on when on the current power of light work light Central (illegible icon) is orange, no other active lighting.

  Low start and keeps running fan.

  Measures taken so far:
  (1) remove all power and press the power button / stop for 30 seconds then restart
  (2) memory reinstall
  (3) replaced HARD disk
  (4) blew fans (the user is a smoker - now STINKS like HELL)
  (5) tried to start a liveDVD Fedora & Fuduntu, begins to turn, but then stops turning. No OS seems to be loaded into memory.

  No change

  Any help would be appreciated - thanks in advance.

  JDEV

  > Problem: computer laptop is not starting at all, screen remains dead, only powerlight and fan says he works.

  No BIOS screen options, no Toshiba welcome screen, nothing...
  Sounds like motherboard problem if the Toshiba start screen does not appear, it means thet POST (power self test) may not the product, which means that it is a junk motherboard

  I think you need to replace the mobo ;(