BlackBerry 10 phone new classic bb very slow when texting

Similar Questions

• my new laptop is very slow.

  my new laptop is very slow. I get a message "high utilization of the processor by windows media sharing", even if the windows media does not run.

  Hello

  1 have had any changes made to your computer before this problem?

  2. what version of Windows are you using?

  I suggest you to follow the methods below and check if it helps.

  Method 1: SFC scan run on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  a. go to the Media Player.

  b. in the menu-> file-> manage libraries-> select each library (music, video, photos, TV recorded (if you have)

  c. check the paths that he manages and make sure it is not too near the root of the C: drive.  For example, it should be something like c:\users\Jim\Music and c:\users\Public\Music BUT NOT c:\users because they will cause the whole directory to re tree - index over and over (when you surf the web, or change files in your profile).

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this information is useful.

• I bought the latest Samsung computer some three weeks ago. My laptop is very slow when I go on the internet but other computers are fine.

  Hello

  I bought the latest samsung computer (notebook 9) three weeks ago. My laptop is very slow when I go on the internet. I have three other phones in my house and they all work very well. Is there any configuration that I should look because the guy told me that it is all the pre-configured.

  Thank you

  original title: network connection

  Hello Pierre,.

  I suggest that you look at this article from Microsoft that can help solve a slow internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow

• Firefox is very slow when you use RDP

  Firefox is fast when you use Windows directly. But when you use RDP it is very slow. For example, empty new tab takes about 6 seconds to open. The RDP connection is fast and another response programs immediately (for example the same page navigation in IE is fast).
  What is the problem with Firefox?

  Could it be the graphics hardware acceleration?

  You will need to probably restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.). On the remote system:

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  Then restart Firefox. Does make a difference?

• Portege R500 boot very slow when wireless

  Hello

  There was a post about it in April, but the only proposed solution was to create two distinct hardware profiles.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=117662

  The laptop is a model of ppr50e-04x048en.
  In the following scenarios, it gives the indicated start-up speed:
  -Switch physical wireless off, network cable connected - Normal
  -Switch physical wireless off, network cable unplugged - Normal
  -Physical wireless switch on, cable connected network - Normal
  -Physical wireless switch on, network cable unplugged - very very slow
  It's so slow that sometimes you don't get bored after 10 minutes of waiting

  There must be a better solution than separate hardware profiles?

  > There must be a better solution than separate hardware profiles?
  Don t think that there is a better solution, it was clearly explained in another view why the laptop does need more to start while the WiFi is enabled.
  If the WiFi is on the phone looking for a possibility to start from the WLan or research for some settings that might be received by WLan.

  On the other hand, you could try updating the BIOS and could check in the WLan card properties-> Advanced tab if there are some settings which could be disabled like Wake up option or similar.

• 15 - ac151dx: wifi very slow when unplugged from charger

  Hello

  I have a new laptop of HP 15-ac151dx. Right out of the box, I noticed that the company becomes exteremly slow when I unplug the charger.  As soon as I plug in the charger, the speed is very good.  It works fine on a wired connection with the charger plugged in or unplugged.

  So far, I tried the following, and nothing worked:

  1. turn off the laptop, to reset the router, turn on laptop

  2. remove the checkmark beside: ALLOW the COMPUTER TO TURN THIS DEVICE OFF SAVE tab managemnt Realtek RTL8188EE wifi power adapter.  I also didi this on Realtek PCIe FE Family Controller.

  3. went in the settings of advanced and equal "battery power" parameter settings "plugged in."

  4. Rinse the DNS

  5 reset the TCP/IP stack

  6 driver adapter wifi update to 2023.18.814.2015 to 2023.27.1230.2015

  7. update of Windows Ran

  8. check the BIOS for power management setting, but can't find anything

  9 exchanged the laptop - always have the same question.

  Are there other settings that can I can check?  Looks like a setting simple power management, I'm missing somewhere.

  Thank you very much.  In fact, it's a driver problem.  I have done the following:

  1 restore BIOS to factory settings

  2 uninstall the WLAN driver

  3. scan for hardware changes in the action menu in the Manager of devic

  4 reboot

  5 HP Recovery Manager--> reinstall WLAN drivers

  6 reboot

  7. HP support--> latest install Web site drivers WLAN

• With Ubuntu - wellcome very slow when screen Toshiba NB100 no wifi access

  Hello
  I am a new user of ubuntu on nb100 and I have a problem when there is no wifi connection:

  Wellcome Toshiba ubuntu with every choice menu (games, administration, internet...) work very quickly when WiFi is okay and on and if you are in other cases, it works very, very slowly.

  Other cases, it means:
  -ubuntu stop you lan connections,
  - or are you somewhere without wifi connections

  If you have already loaded programs that that program working normally, it is only the menu toshiba ubuntu that does not work properly. When you share a program to the Ubuntu menu, sometimes, you have a blank screen instead of work well

  I hope someone can help me

  Thank you.
  Michel

  Post edited by: mmo91

  module:

  This problem occurs when you use the menu of ubuntu GUI written by toshiba, I think, because if you use ALT - F1, everything goes fast.

  Hello!

  It is a known issue on Windows systems. If you n t use the WLAN and connect to the local network and you have active DHCP it will takes a lot of time on start up because the operating system tries to get an IP address from the DHCP server.

  Try to assign a static IP address, and the problem should be solved.

  Good bye

• Re: Camileo S10 - very slow when the SD card is in.

  My Camileo S10 was working fine for months with my 8 GB ScanDisk Ultra II memory card.
  Now, when I start the camera, it is very slow to start and operate (a few second delay for each operations).

  When I remove the card SD and trun on the camera, it works fine.

  Is this a known issue?
  An idea for me?

  Thank you.

  Hello

  For me, it looks like a problem with the SD card inserted.
  I think you should try to format the card CD and it should check again.
  If this will not help and you won't see a performance improvement you should replace the SD card and should try another.

  Welcome them

• PMC-GPIB with NOR-488 DDK very slow when sending the commands-GPIB

  Hello

  I use a PMC-GPIB Board and the NOR-488DDK allows to develop a GPIB Interface with VxWorks. Already, it works correctly, but sending a GPIB command takes about 100 ms, which is very slow.

  Are there opportunities to speed up data transfer?

  Hello again,

  I found a solution to my problem! I realized that the command execution is related to the vxWorks system clock! Of course, this is done in the DDK (driver development kit).

  The system clock is easily adjustable upper and then orders are shipped quickly.

  Thanks for your time

  Good day

  Cassidian

• I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

  My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

  HI Bob,

  Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

  Good luck!

• I have a computer laptop packard bell who became very slow when stopping down

  I HAVE A LAPTOP FROM PACKARD BELL, WHICH BECAME VERY SLOW CLOSE. I SUSPECT THAT THERE IS A BACKGROUND PROGRAM SHUTDOWN TACTIC, BECAUSE SOMETIMES A BLUE SCREEN APPEARS LITERALLY HALF A SECOND, THEN DISAPPEARING TOO FAST FOR ME TO READ. HOWEVER, IVE JUST MANAGED TO SEE 'FORCE SHUT DOWN' WILL DISPLAY. CAN ANYONE HELP?

  PS - IM RUNNING KASPERSKY PURE 2012 AND I LOADED DISKKEEPER (TRIAL VERSION).

  EXCEPT THAT IVE BEEN THRU ALL MY STARTUP PROGRAMS AND SEVERELY LIMITED THEM.

  Most of the time, you can use the Task Manager to see which programs are hogging resources.  Make sure you click on tab the process, and then on the small button at the bottom left that says something like "show processes from all users".

  In addition, switch to view... Select the columns entry and select other readings/o and i/o
  You can sort the columns by clicking on the title - this way, you can control what is spking during closing.  Get the name of the process that is spking and we can start watching them.

  Also, try the clean boot here procedure to solve problems: http://support.microsoft.com/kb/929135
  Another link for him here: http://support.microsoft.com/kb/331796

• listener very slow when listener.log file reach the size 4G

  client cannot connect to the instance, and has an error:
  ----------------------------------------------
  AMT-12560: TNS: Protocol adapter error
  AMT-00530: Protocol adapter error
  Windows 64-bit error: 53: unknown error
  TNS-12518: TNS: listener could not hand off client connection
  AMT-12571: TNS: packet writer failure
  AMT-12560: TNS: Protocol adapter error
  AMT-00530: Protocol adapter error
  Windows 64-bit error: 54: unknown error
  
  I restart the receiver, but it is very slow to boot completely.
  I found that the listener.log file is size 4G, when I delete this file and restart receiver, the listener is normal.
  
  If the log file has a 4G limited by oracle?
  
  Version:
  -------------------------------------------------------------------
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  Bug 9497965 - Win: listener startup fails Due to listener.log size is greater than 4 GB [9497965.8 ID]

  better in time you should clear the logs and keep it less than 4 GB.

  Thank you
  Christian Christmas Pal Singh

• new series of very slow pc

  I have a new dell inspiron 1545.it turns very slowly to the point where it touches everything.i must wait about 30 seconds to get on firefox or i.e. and all my documents even slow loading and I can't play my games online have either.i windows 7 and a very good antivirus so I don't think im infected.does someone has a solution to this?

  If it helped anything?

  You have additional toolbars in browsers?

  Maybe your hardware is a failure.

  "Hard drive has failed and is in PIO Mode (IDE only - not applicable for disks SATA drives). It's very much slow (like being in 1985). See Hans-Georg Michna here information -http://winhlp.com/?q=node/10

  If the hotfix registry PIO only 'glue' (or you have a SATA drive), the drive is probably faulty and needs to be tested.
  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot "(Malkeleah to THIS post.).

  To check your RAM:

  Tests with Memtest86 + www.memtest.org . Download the .iso image file to create a bootable cd. Burn the file with the 3rd party software as an image, not as burning data. A good 3rd party software is www.imgburn.com by (Ctrl + Alt + Delete) Task Manager

  Also, go to the process tab and tell me which uses most of your CPU and Mem Usage

  Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.

• BlackBerry Smartphones phone new problem... Please help urgently...

  Hello...

  I really need a help that expert on black berry 9810. I am a new blackberry user by the way. So now the problem is...

  I can't configure my phone because it always came to ask me upgrade my data plan. In addition to this, sound out always asking me to connect to the network while my phone is connected to the network.

  Please help thanks me...!

  Hello ccarthine

  Welcome to the Forums of the BlackBerry Support

  We need BlackBerry data Plan to access most application on our Mobile network / BIS our carrier, a normal data plan will not provide you these features.

  Then, contact your carrier or Wireless service provider to find out if your account is configured with the BIS.

• Just downloaded Photoshop CS6 on my new iMac, and it seems to be very slow when I try to change the images?

  When I use spot Healing Brush tool and clone for example stamp, I have to wait for a while see the changes I'm making. On-site 'dark marks' Healing Brush tool made of brush, stay on the photo for a long time, before it disappears.
  and the little corner, I tried to remove it, disappeared. Sometimes, I have to click somewhere else in the picture, to make him disappear dark spot. A little hard to explain, but it seems much slower than when I used Photoshop Cs6 on my Macbook Pro.
  for many years. Not had a problem with Photoshop so. Is this normal? Is there something I can do? Updates? Have tried to reinstall Photoshop.

  Hello Annette,.

  Please make sure that the computer meets the minimum system requirements.

  System requirements | Photoshop

  In addition, you can try to optimize Photoshop. Please click on the link to follow the steps below.

  Optimize performance. Photoshop

  I hope this helps.

  ~ UL