Similar Questions

• iBooks has not worked since last iOS 9 update... why?

  iBooks has not worked since last iOS 9 update... why?

  With no information, it is impossible to help. What do you mean by "didn't work" (app is not open, you can not open the books within the application, books don't download from the store,...?), and what you've tried to see if that solves it (e.g. close the application via the task bar of the phone, soft-reset/reboot of the phone, backup and copy purchases through iTunes on your computer and restoring the backup library)?

• NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  Message that appears is: -.

  Windows has stopped this device because it has reported problems. (Code 43)

  BB

  Install the latest driver from nVIDIA:

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BlackBerry Smartphones Trackpad does not - Touch screen work

  I bought a Blackberry 9900 in September 2011.

  in July 2012, I had the phone replaced under warranty as the WiFi signal went funny (he was VERY weak all the time) as the speaker was roaring because of play a little hard, so I got the handset replaced under warranty.

  Blackberry 9900 replacement handset was working fine until about a month, when my trackpad kept work stoppage. I thought that my phone had frozen, but I could still navigate the phone using the touchscreen. the trackpad works again after 10 seconds.

  I tried to restore the firmware of phones at the factory version, I also tried the last updated one (7,1 Bundle 2061), but still no joy - im guessing the problem is hardware related.

  What are my options?

  my phone is not covered by manufacturer's warranty is it?

  Hello and welcome to the community!

  I suggest a completely clean OS reload... perhaps to aid installation method below 'skeleton' slow...

  At the top of each forum device, there should be some 'sticky' threads dealing with the level of the OS available for many models. If they understand your model, please use those as a reference as you go along. Otherwise, you will have to dig through the download portal official for packages of OS for your model:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  Don't forget that you remove, since your PC, any other BB OS devices as packages with more than one installed on the PC can cause conflicts with this procedure.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try this procedure might limit the specific causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  BenRichardsFife wrote:

  my phone is not covered by manufacturer's warranty is it?

  Only your warranty provider can answer this question for you. Everyone must respect all terms of warranty you received with your purchase (your contract, purchase, governs all), which can be less or more generous than those extending from the RIM. There might be a good read for you here:

  • http://us.BlackBerry.com/legal/handheld-limited-warranty.html

  Good luck and let us know!

• BlackBerry Smartphones in sleep mode no longer works since the update to v5.0.0.1036 & keyboard lock works differently

  Hi all

  Hope you are able to help me with my problem

  I updated my Blackberry Curve 8900 over the weekend to

  v5.0.0.1036(Platform 5.2.0.104) provider is Vodafone.de

  This update was offered when connecting my device to BlackBerry Desktop Application.

  After this update is completed successfully, I discovered the problem the upper top right (usually used for mute) button does not send my camera in standby mode more when you press more than 3 seconds.

  This feature worked perfectly before this update. Unfortunately, I didn't know what version I was before, but as I do updates on more than less regular basis, I guess it was available previously.

  With this problem, I discovered something that works as different as before.

  When I press on the locking of the keyboard (upper left top button) button the lock is now enabled directly and

  the screen goes black. Before this update took place the owner details appeared when pressing this button and the display dims after the set time turns off.

  The details of the owner are correctly added and appear when you go to properties-owner.

  I made a secure deletion (security options - remove security) unit and started from scratch twice already, but the problem remains the same.

  Is it possible to get at least the day before running again.

  I m using a case-mate case with built in battery I want to reboot my BB when no plug is available. Unfortunately, it doesn't have a magnet which send the device to sleep automatically when plugged in the case, so this manual standby option is important for me to

  extend the life of the battery.

  Forward to your response.

  Thanks in advance.

  Kind regards

  Agent of

  Of course, you can ask that... the most effective thing would be to go through your service provider for their support and to make this request. RIM/BlackBerry will listen to the questions and some of them (I think) much more than a user, that the carrier has more weight and shoot.

  I'll add that... This change in characteristics were made from last March, in ALL the operating systems for all devices... and has been included in all since. And then that there was much complaining about this function since then and during that period it have upgraded the OS in all areas, I don't think he'll change - in the next version for sure, or after. There's a reason any, they did this step in this direction.

  But the call of your carrier is the best way to make your voice heard, I think.

• MMS does not work since 1.0.3 update

  MMS does not send to other phones or to an e-mail address. No errors of any kind, is just as he sent it, but I can never receive anything...

  I rebooted my phone and it started to work again... so be it.

• Do not mistake of working Video Player 'INSTALL the updated DRIVER'

  Original title: I am IMPOSSIBLE to GET MY PLAYER VIDOE to WORK. HAVE HAD SEVERAL MESSAGES, THAT THE LATTER IS SAYS I NEED TO INSTALL A DRIVER UPDATED FOR THE READER. DON'T KNOW WHAT TO DO.
  I had problems using the video player because I had installed Firefox. Looks like everyone says its good but have had no more problems since its start. Just drive does not play. I don't
  know what else need to ask. Am computer stupid...

  Hello

  1. don't you make changes on the computer before the show?
  2. what player do you use?
  3. What is the exact error message that you receive on the computer?
  4. what web browser do you use?

  Method 1:
  If you use Windows Media Player, and then run the fix it and check.
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:
  You can update the video car on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the steps above does not help, then try to uninstall Firefox and check.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 4:
  If the problem does not occur after uninstalling Firefox then, you try to install the Firefox to the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

• My Blackberry blackBerry 10 ID is not recognized after have changed after the last update.

  So I couldn't remember the password after that I didn't download it later. I was on a laptop and deleted then created the new ID I still get alerts 'need one or more apps ID... He never acknowledges new password. It also means that I can't update apps BBW!

  check out this post... http://supportforums.BlackBerry.com/T5/downloaded-applications/how-to-regain-access-to-your-BBID/m-p...

• Spell check does not work since the 2015.0 update

  Since I've updated for Dreamweaver 2015.0, spell checker didn't work. I tend to use split view. I can only choose spell in the menu while looking at Code, but when I do this, the spelling seems to do nothing. I tried it in the files I know have problems with spelling, and Dreamweaver reported no errors or open to anything that resembled check spelling. Am I missing something?

  Tammy

  Hello

  even if you are in Mode Split you of course Design Mode is also selected as shown in the screenshot below

  

  Concerning

  Vivek

• How can I get the interactive weather maps at work since the last FireFox update?

  Interactive maps from Weather.com and Intellicast.com stop working for me with the latest updates (June 2012) to v13. Guess that do not know if it's the right "place" for this question, but need help I'm exasperated with Firefox (after years and years of being a happy user). It is not that difficult with an update!
  I have searched for a solution on Mozilla and other places and have so far led to nothing useful. Suggestions that I found so far are useless and its pretty crazy that an update for this browser would cause such a headache! Change local block has no effect. Checked on my firewall/security. Is it not. Reinstalled Java. Not it (I got the latest version installed). It is not just this much trouble to access my usual sites after an update of the browser! Note that the interactive maps on both sites work fine on Chrome and IE.

  Problem with the video play in Firefox 13, do not play the map interactive from weather.comand mlb.com/gameday Solution below worked for me.

  Jeromie Clark 2012-06-14 13:55:05 PDT          Comment 24
  

  Disable the plug-in RealPlayer browser recorder is not sufficient to solve this problem.

  You must fill out * all * the following steps:

     Launch RealPlayer
     Click the RealPlayer icon in the upper left corner of the window and choose Preferences.
     Choose Download & Recording from the left hand panel
     Uncheck "Enable Web Download & Recording for these installed browsers"
     Click OK and close RealPlayer
     Restart Firefox
  

  Re: https://bugzilla.mozilla.org/show_bug.cgi?id=764210

• Smart no longer works since the Style last updated Indesign CS6

  Hello

  It's all in under the title: since the last update of Indesign CS6, I can't use the plugin chic Style.

  Either I must manually select the table, and go to tab 'Treatment' (which is much longer than to drag the Smart on the table), it behaves like a classical library, placing the item on the page.

  Can't drag Smart Style directly on a table.

  
  Anyone have the same problem?

  Thank you...

  Thank you for your response... After the reinstallation of desintalling/chic Style, this is excellent work...

• BlackBerry 10 Again... texting does not transfer to my Q10/Z10

  I know this has been discussed a lot, but I don't know what is info/news. so I bought this Z10 a few weeks ago and NEVER used because when I tried to upgrade my device to the new, it does not transfer my SMS/text messages on the new device.

  I tried MANY times. passage of my 9780 to Z10 using Mac... everything transferred excpet my texts.

  Tried to use maneger Office on my PC and everything is still there except my text messages.

  tried to go to my 9780 to 9360 (since its execution OS7) and then tried to go to Z10 9360 again the same question... SMS still not there...

  When I used the link and put two devices, it shows that everything, including TEXT Messages transferred fine without problem

  tried to make a backup of card media and then restor inside the Z10... always the same question... without SMS/text

  I can see the names/numbers of the people who texted me on my older device (also the exact order in which the texted me on my old camera) but when I opened them they are just empty. nothing is there

  So I deiceded I'll just sell the Z10 (which I did) and stick with my old camera because there is no way I can use it without my old texts... and I didn't like the keyboard so it was kinda ok...

  in any case, I bought a Q10 now because it has a keyboard (which was the main problem with the Z10 for me) and went through everything above! everything is always transferred except my text messages. I was playing with it and tried to find words of my text messages and I was able to find some OLD text messages (like 1 + years or maybe more) but that's all.

  For the moment, I try to use Blackberry Protect and hoping for the best, but something tells me it won't...

  any ideas on what I can do here? All I need is my only problem it's SMS/MMS. I spent hours today reading online, trying different things and not luck. The same thing when I had the Z10... I lost hours and hours and eventually sell it and lose money without actually using the device for more than one hour of actual use

  I want this thing to backup/restore is just as easy as the iPhones or older blackberry devices

  Please help me before I go back to my old blackberyy because it's what I have to do if it works not once again... that SUCKS!

  OK well it kinda worked. For some reason, only certain contacts text disappered but I me am I'd say about 80% of my texts. that is great! but my new question is this. I noticed that some texts does not show the name of the contact, so I thought that maybe it still load all contacts from the back to the top. so I let him, but none of the names of contacts displays now? I checked and it does not show my contacts info are there with the number correct and everything, but in the text any name! only phone numbers! I have the contacts record with country and area code but still...

• Just updated to IOS 10 and replace text does not work

  Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

  I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

• I can't select or copy text on Firefox for Android 26.0.1 (device: Samsung Galaxy Note 2) OS: Android 4.3. Long press on the text does not work. )

  Can't select or copy text on Firefox for Android 26.0.1.
  Device: Samsung Galaxy 2 Note.
  OS: Android 4.3.
  Long press on the text does not work.

  I would ask someone to check that...

  I'm glad to hear that your problem has been resolved by using the beta version.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• Predictive text does not work. Help.

  predictive text does not work

  To have seized predictive available in individual applications, you must first enable in settings > general > keyboard > predictive.

  Switch on your screen capture allows you to disable predictive on per - app basis. It is grated out because you have not enabled this feature in the settings.