BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

Similar Questions

• Cannot find the operating system files

  Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

  Thank you very much I'll check on that.  Ended up doing a restore of the original.  Painful but successful.

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• Failed to load the operating system

  Everything seems fine on my PC, except when the machine is started.  He dies, goes to a black screen with the message "Unable to load the operating system".  My work is about to reboot, F8, and then select the drive (South), and then press ENTER.  All right.

  I would return it starts normally.

  Any advice much appreciated.

  "Nirv999" wrote in message news: 09244f68-d2d5-4625-b676-a9e94668d58a...
  > Everything seems fine on my PC, except when the machine is started. He dies,
  > goes to a black screen with the message "unable to load the operating system. My work around
  > is to reboot, F8, and then select the drive (South), then press ENTER.
  > All right.
  >
  > I want to return it starts normally.
  >
  > Any advice much appreciated.
  >
   
   
  This sounds like the BIOS failed in a different startup command, or
  you have a USB key that tries to start and failed (for what is obvious
  reason!)
  -Make sure you have nothing plugged in USB ports except your
  Mouse keyboard &, if necessary.
  then try a cold start
  If it works, then plug your USB stuff one at a time, each reboot
  time - see that it causes.
   
  If it doesn't, then check the Boot in the BIOS order - to ensure that
  the CD and HD are the first two devices (up to you that who!) and who
  Activate you the option "other devices balance"if it's there. "
   
  See if that cures it.
   
  --
  Noel
   
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  NTSC and PAL are analog standards and don't apply to the share or export settings in iMovie.

  It creates the same FPS and dimensions as your source file.

  What you trying to create?

• If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files?

  If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?

  Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.

  This has been answered before, if you do a search for "key recovery" it appears among the first results.

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/will-i-lose-my-files-if-i-do-one-key-recove...

• I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  In addition to the steps mentioned above, you can also try:

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software

  I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software.  I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work.  I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive.  My CS6 software install?  I bought CS5 and CS6 improved.  I don't want to go on the CCif I don't have to.  Thank you!!!

  as long as you have your serial numbers and installation cs6 files, you should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• I have Adobe Acrobat 9 Standard on both of my computers.  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.  After you install Acrobat 9 special and differential treatment in the computer once,

  I have Adobe Acrobat 9 Standard on both of my computers.

  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.

  After you install Acrobat 9 special and differential treatment in the computer once, I wanted to update the update of the version 9.0.0 software to the same level as it was before the crash and that the other computer has version named 9.5.5.

  The update to version 9.0.0 system does not at all. 'There is no update' listed in the dialog box.

  Can you advise how to get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level it had before the accident.

  FTP://FTP.Adobe.com/pub/Adobe/Acrobat/Win/9.x/

• How to make a copy of XP for a HP Mini. Seems my OS is corrupted and I need again to load the operating system.

  My children HP Mini won't start. Just triies, flashes and displays gray screen with cursor flashing at the top left, then repeat the cycle.

  I think I need to reload Operatin System.

  Where can I find a copy of the operating system at a reasonable price?

  It should have a method to restore it to factory settings.  (In your words, "recharge system operatin".)

  I think, if I'm not mistaken (although you have the HP Mini is still unknown) you can turn off the machine, turn it on and start typing "F11" once per second as soon as you turn it on.  Then, you should get a menu and one of the options should be "System Recovery" - or it may simply start.

  Or - if this does not work:
  Order of the recovery disc for Windows 7, Vista or XP

• Cannot start the operating system

  Hi everyone, I've seen many similar scenarios. Not sure if mine is unique. I do not get a syntax error as others, and this was not due to the update of windows. Our suddenly stopped working.  I tried knocking PF12 w/out of the options for safe mode and couldn't get to a MSDOS command prompt I just get blank screen.  I have the CD to our computer that comes with it when we bought there are records of the operating system, but do not say recovery or restart the disk label so I didn't know if she would it reboot or rewrite it. All ideas and comments are greatly appreciated.

  Tell us the brand and model of the PC and what version of XP (Home, Pro, or MCE) runs as well as the Service Pack level.

  Do you have critical data on the backup computer?

  If this is not the case, press the "F8" key after the computer starts:

  support.Microsoft.com/kb/307852

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• If I use the SSD to initiate the operating system and a hard disk of data what exactly will be the benefit of this end?

  Hello

  I would like to know if I use the SSD drive for the operating system boot and a hard drive for data. What will be the benefit of this effect,

  I know that SSDS starts much more quickly and reads and writes data faster.

  When I use the SSD for OS then my only wil advantage so I have faster from the OS, not more than

  but the reading and writing data wil either by the hard drive so I wil not use all the benefits of the SSD, data wil be read and written by hard drive!

  Am I right or wrong?

  Johan

  SSD benefits for most of the time of loading, and it is for all software. If you install Windows on a SSD and return to a HARD drive after a few weeks you will certainly appreciate the value of an SSD, just for the

  only the loading.

  While startup in Windows is the most obvious, the Windows advantage is usually a bit snappier

  on an SSD.

  An SSD expected to also help in many programs such as Photoshop, video editing, the processing speeds

  or CAD, due to data being created during the writing of these programs.

  I think the reads and writes more visible with large files.

  All my programs are on the SSD, but my games are on the HARD disk.

  Games to load a large number of data and will load faster on an SSD, but it's still a few seconds.

  and as games use a lot of Go, it is not really profitable to keep (150 +) on an SSD.

  -J' I keep most of my data, except the music (to save space) in my user folder, but haven't really

  noticed a difference in speed when opening a data file, such as a Word, PDF, images, or similar

  'small' files from the HARD drive.
  -I wouldn't take an SSD less 120 GB. Try to run Windows on a 60GB translate too

  stuffing autour with management of data between the SSD and HDD. In particular, as it should be

  keep 20% an SSD free to allow the two "garbage collection" and deliver a load of

  cells of extra memory to extend the life of the DSS (data gets moved to empty cells when the cells die).

  There is also a noticeable difference between the speeds of SATA2 and SATA 3 controller, so if your motherboard uses the SATA2 more the advantage of an SSD is not as great as with SATA3.

  In addition, the new SATA3 SSD controllers are faster than those of two years ago.

  SSD is a big enough topic. There are many items in the wild that may be useful.

  .

• Portege 3440CT reinstalling the operating system and error NTLDR

  Hi all

  I have a Portege 3400 I picked up a few years ago when starting a business. The machine was made by many, and it no longer starts. I want to reinstall the OS - the only problem is that I don't have the original CD Rom drive that came with the unit. I have a portable CD player that I can plug into the USB port of the adapter, but during the taking of a boot device, it is not yet trying to look for the CD player and immediately gives me an NTLDR error.

  The only option for the boot device which does not give me the same error is when I take the network (Lan), but I have no idea how to do to set up my local network so I can use it as a source for the reinstallation of the operating system.

  Can someone help me?

  Thank you

  Manish
  Matt (at) Gen - a (dot) com

  Hello

  The error NTLDR says that your device or disk is not bootable. What OS did you use? I know that Windows NT doesn't support USB.
  Please check out this article written by Microsoft:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;196661

  Also, I found a topic in the forum with a similar problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2182&MessageID=6043#6043

  Good bye