BlackBerry App serious problems with the new facebook app!

Similar Questions

• BlackBerry Bond serious problems with the GPS on BB jump with OS 10.3.1

  Hello

  I have 3 problems with my BB jump; for 1 of it, I write here a solution.

  When I get on the maps of BB (installed by default) with location and a Wi - Fi enabled connection, my position still show that I'm somewhere in Basel (Switzerland), even though I live in other countries European. I tried the settings, and I can't find anywhere any preset location. Is it not strange that the GPS is not able to find my REAL position? Please let me know what I can do to be legitimate spotted.

  the other secondary issues which I hope will be resolved with upgrades:

  1. the sound of the keyboard cannot be completely reduced, even if the sound is at a minimum.

  2. the sound of the camera has no parameters to kill noise when shooting.

  Thank you.

  citizen_ka wrote:

  It is true that I didn't try the device under the sky :).

  Well, there you go. Go outside with a view of the sky, no buildings.

  What part of the world, what country are you?

  citizen_ka wrote:

  the volume is set to minimum maximum and still makes audible clicks when entering.

  Minimum only.

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• Firefox and serious problems with the police on the websites bloglike.

  Firefox on my computer has some serious problems with the police on some sites, such as: twitter, tumblr and a few other bloglike.

  Images:
  Twetter / thumblr / other

  Yes, it is more likely a hardware acceleration problem or a problem with the specific fonts (rendering).

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1

  You can use this extension to see what fonts are used for the selected text.

  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• Question "BOLD" of blackBerry Smartphones and synchronization with the new Media Sync for Mac

  Someone at - he had problems with the new media manager not achievements the media in the "BOLD" card, it worked for my curve but not the "BOLD" it says for me to insert the press card. I tried formatting, but still used hired there is one in there to transfer my iTunes. Any suggestions?

  I just tried sync'ing a playlist from iTunes to my "BOLD" w / Media Sync and it worked fine. I don't have a memory card either. It took two trials - the first doesn't seem to work, but the second went without a hitch. You have your "BOLD" value will automatically switch on the mass storage device when connected to your Mac - I do not know if it would make a difference.

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• My customer is having a serious problem with the Contact form Widget

  My Client is to have a serious problem with the Contact form Widget that I can't seem to figure out how to fix.

  I created a website for a client and inserted a widget of Contact form on the "Contact us" page Whenever someone uses the form, e-mail receive my client shows my e-mail address as the sender. So when they "meet" the email, the response is sent to me and not the person who sent the original message. This creates a major problem in that I get flooded with answers e-mail while my client's potential customers go without a response.

  When I look at ' Site Manager > email system > Workflow information > e-mail address on the site administration Console, it displays my e-mail information. This is what needs to be changed?  If this is the case, what needs to be placed in this field for the email address of my client receives presents information email senders in the field "from".  My client wants to be able to click on reply and the message sent to the right side. They would be very angry if should be cut and past shippers Correo electronico of the body text on all the contacts they receive.

  Their feeling is that if I can't find a way to make the contact form works as it should, then there is no need for them.

  Can someone help me understand this? I really don't want to disappoint my first client.

  Congratulations for your first customer! =>

  Looks like you can have your email in places where your customers email should be.

  Here are the places you need to change your e-mail address.

  First adjust the answering of your web form is your customer email. Screenshot: http://screencast.com/t/YWiZZ30E0jE and http://screencast.com/t/u4t69anTLR

  Second set Emails to come your clients e-mail system. Site management > system email > set default "from" e-mail. Screenshot: http://screencast.com/t/EAr2sfXk

  I always go through each email system and check the e-mail address after you set the default value. I found that it doesn't always change them for some reason any. Note: If you are on a lower to webCommerce plan your list can be shorter than what is shown.

  Make sure that the email you the list of customers is also an email they want in public.

  Also provide information on the TSA that thetrickster888 is good information.

  I hope this helps.

  Lynda

• BlackBerry Smartphones big problem with the torch 9800

  Hi mangment

  I have me Saudi Arabia, my services blackberry torch bay is STC

  but I have more problem needing urgent fixed yoyr end to avoid any problems with the client

  I give you the problem:

  -slow Internet a few open time nd not to open some time must be restart my phone

  Facebook - last worm is not working nd nd nd rss my spase twtier

  -software update blackberry form each time give no avalbel update

  -hang up

  -the slow volume

  -the world of the app does not work in Saudi Arabia

  -My worm's last 6.0.0.246 but still you are not average to resolv urgnet need resolve or

  I need torch nd my mony due am customer feedback

  thnks alharbi

  Yes, you should be able to update the device without problem.

  For other questions, please contact your technical service provider support. If they cannot help you resolve anything, ask them to bring the issue to a level RIM tech support person.

  Good luck

• Problems with the new firmware 0.1.E.1.4

  Hello

  After the last update, my phone (Samsung Galaxy S3) has problems with his phone for headset support.

  I can only use the headset as headphones to phone for calls. Do not go with general audio profile.

  Sometimes I can connect audio but it disconnects quickly.

  It is a very serious problem that needs to be fixed, but I doubt that Sony will be releasing a fix quickly.

  So, how do I go back to the previous firmware? (0.1.D.0.6)

  With this firmware, I had no problem. The new firmware has a significant improvement as long as Visual but the helmet doesn't help...

  I need help. Thank you.

  OK, I just do a downgrade.

  I did a factory Reset on the helmet, downloaded "Update Services" and the program tells me that there is an update available, after the update has been completed I'm back on 0.1.D.0.6!

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with the new update

  Any browser looks graphically unstable and content is empty with the new update, is it just me or is just the update which is unstable?

  Hello

  Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select Options Preferences on Mac or Linux, or Windows.

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.