BlackBerry Facebook for up-to-date passport 10.7 passport do not load the friends profile

Similar Questions

• Windows could not load the NLS being missing or corrupt data.

  I reinstalled Windows Vista 32 bit on my laptop Gateway using the OEM install cd that comes with it, but now, when I boot, I have the following window:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000f
  Info: Windows failed to load the NLS being missing or corrupt data.

  Reading a similar post, I tried kites 3 methods of WinRE (Startup Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran the WinRE Windows memory diagnostic tool and no error on my hard drive.

  I went to the gateway support site & also tried to access the recovery partition by pressing ALT + F10 to reboot, but it didn't work either. I tried pressing F8 safe mode, but I don't have the option "Repair your computer" that would have gotten me in the window of the gateway recovery management. I can't get in either safe mode, load a list of files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys, then the message Windows Boot Manager window reappears again (see above).

  Reading another post, perhaps to copy files .nls of my installation on my hard drive cd would do the trick, but I don't know how to do this. I need the old data, I want to just my laptop to boot and run without having to buy a new hard drive.

  Thanks in advance for your help.

  Here is an answer I've found: http://www.eggheadcafe.com/software/aspnet/34039669/nls-data-is-missing--cannot-repair.aspx of Gary Velvet:

  I set up an instance of Vista virtual machine and copied since all the
  *.nls in/Windows/System32 files and all *.fon files of the
  Windows/Fonts.  I then put on a USB key and inserted in
  the breakage of the machine.

  I didn't know that this WindowsRE could read USB drives. It does things
  easier. I then crushed the files on the area damaged with those of the
  clean installation and a reboot took me directly in Vista.

  If may also be possible to copy corrupted files of a true Vista Installation DiskLhttp://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.

  To find out which kid are corrupt, we need to run a program to find the corrupted system files. If you use the drive, go to the prompt controls and cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228.  Try to put all the files corrupt here so that we can see if they can be repaired with good copies of the installation disc if we can identify those who go there where replace them correctly.

  Let's see how these options work before considering anything else.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

  Here is the error msg I get from vsphere client.

  Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.

  The system cannot find the specified file

  VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.

  I have ssh client due to vmware ESX.

  ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple

  564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk

  Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log

  Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log

  Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk

  Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk

  It seems that all the files are there. Except that there are some spaces.

  / vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".

  # Disk DescriptorFile

  version = 1

  Encoding = "windows-1252".

  CID = 97c834c1

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "twoGbMaxExtentSparse.

  # Description of the measure

  RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.

  RW 16384 SPARSE "Windows w2k3 - s009.vmdk.

  # The database disk

  #DDB

  ddb.virtualHWVersion = "7".

  DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"

  DDB. Geometry.Cylinders = "16383.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = 'ide '.

  ddb.toolsVersion = "8228.

  ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".

  and here's a copy of the vmware.log file

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).

  2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------

  2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

  2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections

  2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)

  2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).

  2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0

  2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.

  2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

  Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

  vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

  vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

  vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

  The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

  Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

  André

• Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

  Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

  This has happened

  A few times a week

  Is a few weeks ago

  Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.
  Filter = general.useragent.
  Preferences are "BOLD", a line at a time, and then select reset, right click
  Then restart Firefox

• Can I use pictures from the reserve for commercial use for my members to do with.  We would not sell the photos but the use for commercial use.

  Can I use pictures from the reserve for commercial use for my members to do with.  We would not sell the photos but the use for commercial use. (the 29.99 price months?)

  Thank you.

  Barbara

  In your case you will very likely get extended licenses for images from Fotolia.com otherwise you would have to buy a new license for each Member who has access to use the weather picture they actually use it or not...

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• Could not load the FaceBook Application for a 9000 "BOLD" of blackBerry Smartphones

  It's my third BlackBerry 9000 "BOLD", and the first time I had problems downloading the FB app. It says "Sorry, your device does not the requirements of systems that are needed to support FB." I tried referral service book and removing battery - who did nothing. My "BOLD" is v 4.6.303, platform 4.0.0.248, application memory 61.0 MB, memory 859,2 MB (823,6 MB free space).

  Any suggestion will be highly appreciated!

  The latest version of facebook for BlackBerry is 2.0.  It was designed to run on phones with OS 5 or newer.  Your phone is running OS 4.6 which may not work properly with the latest version of facebook.

  What you need to do is a search for facebook 1.9, which will work properly on your phone.

  I hope that helps you.

• After using Facebook for a while a mousemat gray screen comes up and covers the window that prevents me to post something, but I can still scroll up/down

  A gray transparent screen covers my open window Facebook keeps me to post, but I can still scroll vertically. Reload the page solves the problem for a few minutes before repeating the procedure. Problem with the Facebook Page right now.

  Hi Hannesdp,

  Thank you for your question. Right now, your question was refitted to the Helpdesk and to examine the issue, I will need a little more troubleshooting information.

  First please try to access the page in a private window, and then try to reproduce the problem in Mode safe, if it is not reproducible in Mode without failure, then one of the extension or pug-ins can affect scripts on this page.

  "Try Mode without failure of Firefox to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
  

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  A screenshot of the problem and a screenshot of console js may also be necessary if the problem persists in a private window. These are the two reference tools that I can clarify as well.
  [Tool console]
  [Record]

  And if other contributors have other ideas of troubleshooting or input please do not hesitate. We are all happy to help!

• BlackBerry smartphones could not load the internet settings

  I have a Blackberry 8900 and I am unable to load the internet setting in. It is reliance blackberry GSM handset and I use airtel services. so please help me.

  Do you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?

  You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.

  Then call your carrier and you learn about to have added to your account BlackBerry data Plan.

  Good luck.

• Could not load the log for listview

  I can not load calllog to list view.

  Here is the code

  signals:
      void calllogLoaded(const QList &data);
  

  QList callHistoryResults = callHistoryService.callHistory(defaultAccount.id(), defaultFilter, callHistoryParams);emit calllogLoaded(callHistoryResults);
  

  and QML

  calllogDM.insertList(data)
  

  «I got this error "QMetaProperty::read: unable to manage"QList"non-registered data type for the property «QDeclarativeBoundSignalParameters::data»»»

  Have spent days for this, I have not found the solution. Could you help me on this? How can I insert calllog to listview?

  Thank you!

  You need to do the conversion yourself. You should always get the actual data, the CallEntry ( https://developer.blackberry.com/native/reference/cascades/bb__pim__phone__callentry.html ). The model is unable to handle this for you anyway.

• Could not load the device driver for DVD/CD-RW - Satellite 1110

  I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.

  Can someone advise how to recover from this situation?

  Thank you

  Hello

  First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
  I suppose that there could be something wrong with the registry entry.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843

  The user has used the statement that has been proposed on the site of Microsoft.
  This should help.

  Please post again if this method is successful.

• HP connection manager exe. Could not load the Assembly system.data, Version = 1.0.61.0, culture = SQ Lite...

  have new laptop dv7 and continue to receive the window... HP connection manager exe.

  "Cannot load the Assembly system.data, SQ Lite, Version is 1.0.61.0, culture = neutrral, db937bc2d44ff139 = public key token.

  The application will now exit.

  Please identify your laptop / pc

  Look at the basic/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Do not post not the serial number of your product because it is private and considered to be personal information. ###
  
  Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

  Not showing information as requested could delay our responses and troubleshooting slow the question that led you to create a thread. We want to help you, so please help us help you.

  Have you gone to your laptop's web support portal and tried the HP software box software?

  This would certainly be a good starting point.

  Removing and reinstalling the software HP Connection manager is also a good plan. It is also located on the web portal of support for your laptop.

  Best regards

  ERICO

• Could not load the firmware for the WRT610N update

  My new WRT610N v1 is really causing me some grief.  I can connect to 802. 11A devices but nothing on b/g.  I would try to load the new firmware, but when I try to load WRT160N_1.02.2_US_code.bin the process gets to about 22% finished and then gives an error "FAILED to UPGRADE.

  Any suggestions?

  Your router is WRT610N and you try to Upgrde the firmware used for WRT160N file... Both routers are different... Download Firmware 7.27 MB... Also, make sure that your computer is connected to route it (ethernet) while improving the firmware...

  WARNING: Remove the USB storage device (if any); This preserves the data storage USB of corruption...