Change DNS servers in the configuration?

Similar Questions

• DNS servers for the collector

  Hello

  When I run 'show ip' to the collector console, I noticed there are 5 configured DNS servers. But the two servers as I entered during installation are #s 4 and 5. What are the other name servers and it is desirable or possible to change the order so that my DNS servers are first in the list?

  Thank you

  Andrew

  Hi André,.

  SSH in the collector as an administrator and run the following command:

  conf dns d

  for each of the 3 existing DNS servers which are not yours. You should see that your DNS servers.

  Thank you

  Lynden

• Error 105 - unable to resolve the addresses of DNS servers

  Hello! I'm sorry from the start for many stupid questions, I'll ask. I am a beginner :) I don't know if my rooter is the problem or the network cable, when I use cable internet, it works (bad but it works). When I try to go with my router (d-link dir-635) it appears the error 105. I tried all your suggestions, but still nothing. I can do something else or my rooter is dead? PS: I am on Windows 7. Sorry to bother you again!

  Hello

  Please contact Microsoft Community.

  According to the description, it looks like you cannot resolve the address of DNS servers. The probable cause of this problem may be due to the DNS.

  I have a couple of steps that should help you to solve this problem.

  Method 1:

  Try the resolution of the problems mentioned in this link

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Visit this link and see "How can I clear the DNS cache?

  http://Windows.Microsoft.com/en-us/Windows7/DNS-domain-name-system-frequently-asked-questions

  Method 3:

  Try to assign the DNS manually and check

  To change the settings of the adapter wireless network connections.

  a. Click Start, type network and sharing Center in the start search box and press ENTER.

  b. click on change settings card, right click on wireless network connection and click on Properties.

  c. Select Internet version 4 Protocol, click Properties.

  d. place a next point to use the following dns server address.

  change the preferred dns 208.67.222.222 and dns auxiliary as 208.67.222.220 and click on validate the output parameter and click on ok.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Change DNS IP addresses on the ESX host server

  Hello

  I need to change the IP address of my Windows DNS servers on the my ESX hosts. I know I can do this through the vsphere client, but that requires a reboot of the servers. Is there a way I can do this via ssh by changing a file that will not cause a restart of the host? If so, please describe how to do this.

  Also, if the host is restarted, what will happen in the virtual machine of in the interval until the host is upward? It will cause the virtual machine to restart as well, or so I have to restart their after that the host is back? I also disabled HA until I did the DNS changes.

  Thank you.

  normally, I'm a "network service restart. sure enough...

• How to change DNS server with bluetooth wireless in EnvyX2?

  I tried to change DNS servers on my HP Envy X 2 tablet with Windows 8.1 and did not see any network in Device Manager. With a non bluetooth network or a wireless adapter, you can go to the properties of the adapter and select 4 TCP/IP and entry servers manually DND, primary and secondary.

  With the envy of X 2, there is no network setting in Device Manager. There is a Bluetooth wireless adapter, but you can get in its properties at all?

  Anyway is to enter or change the DNS servers with wireless Bluetooth which lies in the desire X 2 Tablet?

  Thank you

  Sally

  Hello @minion22,

  Welcome to the Forums of HP Support!

  I read your post about the problem of the Bluetooth and wanted to help you!

  Bluetooth is a wireless connection to other Bluetooth devices, with its own communication protocol.  It is not a TCP/IP device, so TCP/IP parameters, such as the DNS addresses are without significance for her.  However, you can consult the following resources and let me know if the information was useful in the overall goal you're trying to accomplish:

  What is a Bluetooth personal area network (PAN) network?

  Connect to a Bluetooth personal area network (PAN) network

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• Change of domain in the CTS Manager invalidate the license?

  I need to change the field used in the existing CTS-Manager, but I'm afraid that if I do so, the license will be becomes invalid and CTS - Man will be unusable until I can get a new permit. Will be invalid license if I changed the domain?  I know that I need to import the LDAP server certificates and exchange news, but I want to assure you that I do not lose the license. I couldn't find the answer in the documentation. Help, please.

  Thank you

  Tony

  Tony:

  CTM is installed on a physical server or VM Ware?

  On your question - change the domain name on the CTS Manager will change the MAC license, which would be non - I just tried to change only the domain name on my MC in the laboratory, and after it restarted, the MAC license remained unchanged.

  If you change the DNS servers, however, the MAC license will change - seen elsewhere on the field and in my lab.

  As a general rule:

  On a CTM installed on a physical server license MAC will not change if you change the name of domain/DNS.  It must always be the same.

  On CTM as VM, MAC license will only change if you change some settings.  The MAC license is generated according to certain parameters, so if you change those, MAC license will change accordingly.

  I still need to find a specific list to the Community trade mark as to what will change the license MAC, but it should be similar to the list of items found on the side CUCM:

  http://www.Cisco.com/en/us/partner/docs/voice_ip_comm/CUCM/rel_notes/8_0_1/Delta/VMware.html#wp1054450

  HTH-

  Tina

• How to set an IP address manually and manual DNS servers for my printer HP Photosmart 7525?

  Cannot print.  EU of evil when the printer was initially put in place.  "Happytohelp01" Assstance solved the advised me; a manual IP address unBalayage DNS servers for the printer.  I did not write the information and now my printer is not working (it only worked for about a month), now nada.  I've had at the start of the connection to the web server problems - now its doing the same thing, but I don't know what IP Address and DNS to use.  Please help if you can.

  Hi @LaceyNo1,

  Welcome to the HP Forums!

  I understand that you are wondering, how to set an IP address manually and manual DNS servers for your printer HP Photosmart 7525. I am pleased to see that for you!

  After some research, I think I found the post, my colleague @happytohelp01, helped you with. In this post, Re: Photosmart 7525.

  Hope this is what you are looking for and have a good day!

• Where is the configuration information for Workstation 6.5 / Linux kept?

  I make a partial backup of the box of Ubuntu that I have running Workstation 6.5, and I want to be sure, I'm saving all my VMware settings. / etc/VMware has some stuff, but he's not all that. For example, if I change the Favorites list, none of the files in/etc/vmware change. Where is the configuration stored?

  hostwide config: / etc/vmware/config

  configuration of the user: /home/user/.vmware/preferences

  Configuration of the VM: vmx file

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Changing the configuration of DNS host ESXi

  Hello

  I need to update the DNS servers on our new servers wih ESXi hosts. replace the current two entries with two new IP addresses. I intend to do that via vCenter to host-> DNS and routing Configuration. What I have to restart the management network or ESXi host after making this change to avoid that it comes into force? The documentation seems to indicate that it does not require either:

  http://pubs.VMware.com/vSphere-4-ESXi-installable-vCenter/topic/com.VMware.vSphere.esxi_server_config.doc_41/esx_server_config/advanced_networking/t_change_the_dns_and_routing_configuration.html

  Does anyone have experience to make this change? You recommended placing the host in Maintenance Mode, first and move the virtual machines it would be?

  Thank you.

  Hello

  Thanks for the reply. Once I made the change is a way to confirm that the ESXi host actually uses the new correct DNS server?

  Nslookup should help you identify what DNS server is used

  Type nslookup hostname or ip

  [root@esx-server-1 /] # nslookup 192.168.0.5
  Server: 192.168.0.7
  Address: 192.168.0.7 #53

  name 5.0.168.192.in - addr.arpa = esx-Server - 2.domain.com.

  Is it OK to make the change with direct VM on the host?

  Yes

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• PowerCLI Script to change the DNS servers and domain name

  Hello

  Brand new to PowerCLI, I'm trying to create a script that will change the domain name and the DNS servers of my ESXi servers. I found that I need to update the Vmware.Vim.HostDnsConfig to update these settings. I created the following script and the following error.

  $config = new-Object VMware.Vim.HostDnsConfig
  $config.domainName = "new.domain.com".
  $config.address = new-Object System.String [] (2)
  $config.address [0] = "10.69.69.80".
  $config.address [1] = "10.69.70.80".

  _this $ = get-view-Id "HostNetworkSystem-networkSystem.

  _this $. UpdateDnsConfig ($config)

  You can not call a method on a null value expression.
  

  Line: 1 char: 23
  

  + $_C. UpdateDnsConfig < < < < ($config)
  

  + CategoryInfo: InvalidOperation: (UpdateDnsConfig:String)], RuntimeException
  

  + FullyQualifiedErrorId: InvokeMethodOnNull

  I guessed the error message that I need to a value in the host name, I do not need to change the host name. So I create a variable to remove the host name and place it in the $config. Line received host name but still a mistake because the variable is pulling more information that I need.

  $hostname = get-VMHost | Select name

  $config. Hostname = $hostname

  When I insert the above code I have an error.

  Exception by calling 'UpdateDnsConfig' with '1' or the arguments: ' year error occurred during the configuration of the host.
  Line: 1 char: 23
  + $_C. UpdateDnsConfig < < < < ($config)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  When I look at the $config I see the following.

  DHCP: false
  VirtualNicDevice:
  HostName: @{Name = ESXI01}
  Domain name: new.domain.com
  Address: {10.69.69.80, 10.69.70.80}
  SearchDomain:
  DynamicType:
  DynamicProperty:

  Of course the @{Name = ESXI01} will not work. Someone can explain how to get a host name in a variable and pass it to the Config.Hostname?
  

  You should be able to do easily by using the command "set-vmhostnetwork.

  I don't think that you can just write to VMWare.Vim.HostDnsConfig.

• Change the configuration of DNS host file SCAN

  We have a 2-node rac configuration on our machine. When it was created first, use host file to set the IP name and scan scan because our DNS is not yet ready.

  The DNS is now ready, and when we do nslookup, we are able to see the name of scan & IP.

  How can we migrate the scan configuration to use DNS? Will be just comment on our values of host works file?

  Thank you

  In the case of linux, it is necessary to:

  1. set your DNS servers in/etc/resolve or the NETWORK card configuration file.

  2. check name resolution.

  3. definitions of SCAN comment in the hosts file.

• Install the new - cannot ping configured gateway or DNS servers

  Hi all

  My old VMWare ESXi 3.5 OS got corrupted I did a fresh install of VMWare ESXi 4. It installed ok and I was able to configure everything successfully, but when I run the network test it is impossible to ping anything whatsoever, but it's own IP address.

  I have another machine on the same subnet with the same exact configuration (except for the hostname and IP static) settings and it works properly without any problem.

  I already checked the cable at the back and the green light is on and the flashing. I tried to restart the machine after having placed in the configuration information and settings remained at what I put in, but I still get the same result. The network test is a failure.

  Does anyone have any suggestions as to what could be the cause of this?

  How do you have installed and configured network adapters?  Have you tried swapping the cables between network cards?

  Also, do you have the trunks VLAN configured on the switch?  It is possible, that you must specify a trunk VLAN for the management network to do the work.  That would probably have already been configured on your host 3.5 but is not automatically detected and added.

• Name for name resolution? has expired after no configured DNS servers responded.

  Hello

  I just bought an Acer Aspire 571PG V5.  Whenever I do anything that involves the use of the radio I usually get the following error in the Windows system event log:

  "The name resolution for the community.acer.com name exceeded after no configured DNS servers responded".

  The address featured in changes to error messages according to what I'm trying to access the website.  In this case every 30 seconds or more.  The error ID is 1014, and the Source is 'DNS Client events'.  I'm not sure what the problem.  I have two other laptops on my home network using the same router and they are fine, I've never had a problem with them.

  Has anyone else encountered this problem?

  Kind regards

  Chris

  Hello

  Just to inform that I had this work.  Even though I had brought just the laptop today, it seems readers wireless on it was already outdated.  I downloaded readers wireless updated from the Acer support site and I don't have this particular problem.

  Kind regards

  Chris

• Linksys E3000 (changed to 199.182.166.168 DNS servers) No. Playstation Network Access

  For a month I got weird pop ups on my IPAD, ANDROID phones, desktop computers AND home. I just thought that I had a bad month and I need to spend more time with my individual devices and get clean them. I then noticed recently, last week I was unable to connect to the Playstation network (NAT Type failed, the Internet connection Test failed). This was happening on my PS3 and PS4. I direct connect of PS4 and PS3 to my Modem cable from Time Warner and I have no problem. Everything works fine. But when connected to wireless or wired to my Linksys e3000... no dice.

  I connect to my router and so some research. I noticed that my DNS servers are 199.182.166.168 and 199.182.166.169. I decided the router and then restart my cable modem. Routers Gets a new address and but there are still some problems with the connection to the network Playstaiton (could be downwards). I noticed that my IP DNS address is different.2xx.xxx.xxx.xxx.  I restore the configuration on the router and DNS goes back to 199.182.166.168.  This is all the information I have at the moment. When I get home tonight I'll have more information.

  Does anyone else have this problem?

  Is the router configured for DNS custom or did you automatically detect DNS of the ISP service and ISP modem?

  What modem to ISP Mfr and model # do you have?

  You could ask the ISP service as well about it. Usually they don't change DNS very often.

  It is recommended to test for other DNS services if you want to use different DNS, you can use this:

  http://www.grc.com/DNS/benchmark.htm

  or http://code.google.com/p/namebench/

• Dell 2155cdn network printer offline following change DNS in web configuration

  Hi all

  We have a network of Dell on the wifi in the office printer and have had some problems with sending documents by e-mail (SMTP error). So I tried to debug the problem using the Web of Configuration tool (to the IP address of the printer) and I changed the setting under print settings Server > TCP/IP > DNS Manual of 'get DNS from DHCP server address.

  However, this caused the restart and pass printer is offline and no more, I can access the web interface to change the DNS option it was!

  Any suggestions? The printer does not appear on the wifi at all, that this isn't simply that its IP address has changed (which happened a few times in the past).

  Is there a way to access the configuration and reset the DNS option while the printer is off line?

  See you soon,.

  Emilia

  I found a way: in the Menu of the printer, it is possible to access the Admin settings > TCP/IP > DNS, DHCP indented + restart the printer. Fixed! :)