Could not load the FaceBook Application for a 9000 "BOLD" of blackBerry Smartphones

Similar Questions

• Could not load the library dill for new software and hardware.

  That's what my software told that goes with my own material. I can't it ends to the bottom of the load.  I close my antivirus to down load.    (deleted) Call me if you want.   Could not load dill liibrary C:\Docume~1\user\Local~\1temp\GLF6.tmp can I use my driver recovery cd and not lose the documents on my computer?  What can I do to get my new software and hardware to work?

  Hi RonaldAndis,

  ·         You try to install a software?

  ·         What software are you trying to install?

  ·         Is it a downloaded software or you have an installation CD?

  Method 1: If this is a downloaded software, then try to download it again and see if it helps.

  Method 2: Search for damage if you try to install using a disc.

  Method 3: Place the computer in a clean boot state to install the program.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup, once the troubleshooting completed.

• Could not load the environment variable for websphere mq client

  I use Sun DS One on solaris 10(64 bit) and want to configure before operation password plug-ins, which will use websphere MQ client and capture userPassword to the MQ server.
  I'm below mentioned errors on the server start-slapd:
  
  [15/Feb / 2013:08:54:54-0500] error - ERROR < 4167 > - start system - conn = - 1 = - 1 msgId =-1 op - load library /library_plig-in-Path/64/libtest-plugin.so: error ld.so.1:: ns-slapd: fatal: error of displacement: file /library_plig-in-Path/64/libtest-plugin.so: symbol MQPUT: referenced symbol not found
  [15/Feb / 2013:08:54:54-0500]-ERROR < 4140 > - plugin_setup - conn = - 1 op = - 1 msgId =-1 - Configuration error could not load symbol 'passwordplugin_init' it draws in ' / library_plig-in-Path/64/libtest-plugin.so ' for the plugin password Plugin
  [15/Feb / 2013:08:54:54-0500] Configuration Error config Bootstrap - conn = - 1 op = - 1 msgId =-1 - < 4112 > ERROR - could not load plugin "cn = Password Plugin, cn is plugins, cn = config.
  Server does not! Cannot start the ns-slapd process.
  
  I tried with the LD_LIBRARY_PATH, LD_LIBRARY_PATH_64, PATH, LIBPATH library path, but it does not work.
  
  Thanks in advance
  :)

  Action of the host:
  +... post has been moved from its original location in the forum of Solaris 10 +.
  at a forum server directory, if all goes well for the reconciliation of the subject...

• Is it possible to install 5.0 OS for my 9000 "BOLD" to blackBerry smartphones?

  Is it possible to install 5.0 OS for my 9000 "BOLD"?

  Yesterday, my friend got the 9700, onyx. and when I saw his BB, his BONES seem much better,

  and I thought it was 5.0.

  In my "BOLD" I have OS 4.6.

  Is it possible for me to update my OS from 4.6 to 5.0 on 9000 "BOLD"?

  Somehow I was able to download the software when I Googled it upward. But I'm still not sure these

  software are reliable/official/compatible to my 9000 "BOLD"... So here I ask a question...

  Thank you

  G

  G, Hello and welcome to the Forums of Support BlackBerry.com.

  The latest version for the 9000 is 5.0.0.50 OS 9.

  http://www.BlackBerryForums.com/General-9000-series-discussion-bold/221100-latest-OS-9000-5-0-0-860-...

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• Could not load the device driver for DVD/CD-RW - Satellite 1110

  I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.

  Can someone advise how to recover from this situation?

  Thank you

  Hello

  First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
  I suppose that there could be something wrong with the registry entry.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843

  The user has used the statement that has been proposed on the site of Microsoft.
  This should help.

  Please post again if this method is successful.

• Windows could not load the backup selected for the following reasons

  I'm having a problem, try to restore a backup set

  A failure of HD I had to wipe my computer.

  Now I'm tyring to restore and it doesn't give me the error on the title of this thread with 0x810000E3 error code

  I have windows vista Home premium

  I can see the ZIP files on my external USB hard drive, but when I double click using windows compress or winzip files are not open.

  I tried the restore (basic and advanced) the windows backup and restore program nothing works.

  I have crucial information on this drive I need to recover.

  Any information is greatly appreciated.

  Thank you

  I could not find any information on this specific error code - so it will have to address the situation in a generic way.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.

  Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• application could not load the database

  I have a RoboHelp 9 project that I left open on my computer at night and microsoft updates ran causing my computer to restart.  When I try to open my project in RoboHelp 9, I get the following error:

  Open a project has been cancelled or the application could not load the database for 'C:\CODE\HELP\HELP. CPD»

  How can I fix the CPD file without restarting?

  Hello

  Just delete the CPD and re - open the project. When RoboHelp sees is missing, it will cook in the oven until a new use and then all should be well.

  See you soon... Rick

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• Adobe Reader could not load the dll base

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  Adobe Reader 9, X, and XI all will not pdf error message load Adobe Reader could not load the dll base saying tried to uninstall reinstall changing the settings all it does not please help I use it for my college courses

  Hi Marcel,.

  The question you posted would be better suited in the Adobe Forums; We recommend that you post your question in the Adobe Forums to get help:

  Adobe support: http://forums.adobe.com/community

  Keep us informed on the status of the issue.

• When you try to open a PDF file, it says "Acrobat could not load the DLL base."

  I do not have any Antivirus and when I want to open a PDF it always says "Acrobat could not load the DLL base."

  Hello Kushagra_Saxena,

  To address your error message:
  You can repair Adobe Reader in Control Panel:
  In Windows, choose Start > Control Panel, and then double-click programs and features.
  Click on adobe Reader.
  Click on modify and follow the instructions to repair the application.

  Since you don't have an Antivirus, you can download Microsoft Security Essentials for free.
  It offers offers protection in real time for malware, spyware and other virus infections. It runs
  quietly and efficiently in the background.
  You can download at the following Web site: http://www.microsoft.com/en-us/security_essentials/default.aspx

  I hope this helps.

  Marilyn

• Could not load the webapp in deployment

  Hi guys,.
  I'm trying to deploy my adf application.but get this bug.any idea what I am doing wrong.

  [18: 30:38] cannot determine the platform target profile.  Using default

  [18: 30:38]-deployment began.  ----

  [18: 30:38] the target platform's (Weblogic 10.3).

  [18: 30:41] recovery of the existing application information

  [18: 30:41] analysis of the dependence running...

  [18: 30:41] building...

  [18: 30:49] deployment 2 profiles...

  [18: 30:49] wrote on the Web for C:\Users\Fusion\Desktop\demoApp - Copy6\ViewController\deploy\demoApp_Project1_webapp.war application Module

  [18: 30:51] wrote the Module Enterprise Application-C:\Users\Fusion\Desktop\demoApp - Copy6\deploy\demoApp_Project1_demoApp.ear

  [18: 30:52] Application deployment...

  [18: 31:06] [Deployer: 149191] Operation "deploy" on demand "demoApp_Project1_demoApp" boot on 'WLS_FORMS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_REPORTS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : [Deployer: 149145] failed to contact "WLS_REPORTS". Deployment is delayed until 'WLS_REPORTS' becomes available. ; nested exception is:

  java.rmi.UnknownHostException: could not discover the URL of administration for the server 'WLS_REPORTS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "AdminServer.

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_FORMS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] WebLogic Server Exception: weblogic.application.ModuleException: could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] caused by: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet

  [18:31:15] check the server logs or the console of the server for more details.

  [18:31:15] weblogic.application.ModuleException: failed to load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] undeployment.

  [18:31:15] - incomplete deployment.

  [18:31:15] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  Thank you

  Raul

  User, please tell us your jdev version!

  It seems that you have not installed the adf runtime for your version on the server you are trying to deploy.

  Timo

• Could not load the webapp: ' / em'

  Hi, I'm looking to set up a development environment of forms 11g on my desk and I have a problem with Enterprise Manager... From the WLS console / deployments, I see em ' with a State of "down"; in the start window, I see the following error messages.  (I tried the advice in another post - ' delete all files under... domain... \servers\AdminServer\tmp' and restart, nothing done ").  Any help would be greatly appreciated. (Windows 7, 1.6.0_43, WLS 10.3.6, Fusion Middleware 11.1.2.1.0_64 JDK)

  < 18 September 2013 1:26:05 CEST > < error > < HTTP > < BEA-101371 > < there was a failure during the processing of annotations for application C:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\AdminServer\tmp\_WL_user\em\hsz5x1\em.war. Please make sure that annotations are valid. The error is >

  < 18 September 2013 1:26:05 CEST > < error > < hats > < BEA-149205 > <failed to initialize the em application ' because of the error weblogic.application.ModuleException: cannot load the webapp: ' / em'.

  weblogic.application.ModuleException: cannot load the webapp: ' / em'

  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:395)

  to weblogic.application.internal.flow.ScopedModuleDriver.prepare (ScopedModuleDriver.java:176)

  to weblogic.application.internal.flow.ModuleListenerInvoker.prepare (ModuleListenerInvoker.java:199)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next (DeploymentCallbackFlow.java:517)

  to weblogic.application.utils.StateMachineDriver.nextState (StateMachineDriver .java: 52)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal

  .taglib. UIXCollectionTag

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  Truncated. check the log file full stacktrace

  >

  < 18 September 2013 1:26:07 CEST > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >

  Hello, pay attention to:

  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal

  .taglib. UIXCollectionTag

  The solution is here:

  EM fails to start after Config with BEA-149205 could not initialize the em application ' (Doc ID 1310884.1)

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• Windows could not load the profile of the user

  When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.

  Please reply me with the solution that I use win xp sp2

  Hi citycc,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. are you able to connect to Windows?

  4. how many accounts do you have on the computer?

  See the Microsoft article below and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011