BlackBerry Notifications - conducted Z10
Hello
I noticed that the led does not Flash always when I receive new emails or text. I checked if it is enabled for all types of notifications and alerts, and indeed it is. Could it be that after a certain period of time that I received an email from text / stop LED flashing?
Thank you
Sandro
Yes. It has always been like that since the first Blackberry 10 years ago.
Tags: BlackBerry Smartphones
Similar Questions
-
BlackBerry Blackberry Balance on my Blackberry Limited Edition Z10 Z10
Hi all
How can I use my Blackberry on my Z10 balance?
I think that I didn't have the balance of Blackberry on My Z10.
Best regards
Richard Kesuma
Your BB10 device must be enabled on a server (Blackberry Enterprise Service) BES10 in order to have some balance BB. It is not available otherwise. If you are on a BES10 service from your company, see scientists responsible and let them know that it does not work on your device.
-
Z10 Z10 Possible blackBerry notifications bug?
Hey developers Z10, I noticed this potential bug regarding your notifications on my phone. If I put only mode for "Phone calls" he still sounds when you send and receive text messages. The chime will disappear if I disable all alerts or set it to silent, but otherwise there is nothing in between. Not too practical for the workplace as I would like to receive my calls, but does not bother my colleagues with each text message sent and received. Not sure if it's just my phone, but I think that everything is up to date and my phone is new.
I also noticed that the chimes for my text messages under 'customization'-> 'applications' is different I hear the tone delivery/receipt of messages.
If I'm going to be a noob and have not configured properly, please let me know - otherwise, I hope that this problem is corrected. Thank you!
Similarly, I have never seen this on SMS messages. Also, why would he chime when you "send" a message? You have 3rd party applications installed that could contribute to this?
-
Level 1 Z10 Z10 blackBerry notifications
Hello
I just go from a Bold 9900 to a Z10 and wonder if it is possible to turn the notifications by e-mail of level 1 on the Z10. Please let me know.
Thank you
You define which for the individual contact in the address book.
-
Z10 Z10 blackBerry notifications
Hello
I (Normal) sound notifications and set of LED. The LED displays, but no sound when I get an email. I stop Bluetooth and disconnected the last connection (we have a Ford Escape that syncs with the phone). Still not beyond sound when a mail electronics/txt message arrives. Any advice?
Thank you
Make sure that you have followed the correct steps up to this point.
Let's start with your notifications by e-mail. On your home screen, drag down from the top and select Notifications and highlight at the bottom of this page and select Applications. E-mail Messages, and select the e-mail in question account. Make sure sound is enabled and select a ringtone for your notification.
If please post back indicating that you have followed these steps and do not always receive any audible notification.
-
BlackBerry software new Z10 10.3 for z10
I have my new blackberry z10, which is STL100-2 version of the os - 10.0 I want update 10.3 but display of updated software I have latest software help me please update.
In this case... an autoloader OS file.
I suggest you try autoloader method:
Beware that it is completely destructive... the device will be 'as new'... None given, no apps, no accounts, etc. Remember you first take a full backup, as well as make full manual documentation of applications, accounts, configurations, etc. Sometimes a restore reintroduced corruption even sought to eliminate, and manual reconfiguration is required.
Good luck and let us know!
-
BlackBerry App Blackberry app world Z10 does not
Since the last version of the software to update, Blackberry App world on my phone will not work. I open it and it tries to load but never beyond this stage. I pulled the battery to see if it can help, but still no luck. I can't remove it because it is part of the new OS 10. Any information would be appreciated.
Thank you
- On your Z10, go to the icon of your music or games.
- Tap the icon to overflow on the left three points lower and touchscreen BlackBerry World.
- Now BlackBerryWorld should start for you.
credit to ukmight for this solution.
-
When I'm on the lock screen, I used to see my notifications (e-mail, SMS, etc.) when you press the button on the top tre... I do not see more... Thank you
You can try this:
Go to Blackberry Protect computer (https://blackberryid.blackberry.com/bbid/login/?callbackuri=aHR0cHM6Ly9wcm90ZWN0LmJsYWNrYmVycnkuY29t...
Sign in with your BB ID
go to 'display a message '. Type a message, click a message.
It work?
-
BlackBerry blackberry q10 to z10 Z10
If my daughter wanted to try my old z10, except that I gave it to my daughter who has been put in place in this regard. Girl 2 was a great work of z30. Girl 1 was a q10 I booted up the z10 and wiped. Then when I was put in place it would not girl 1 bbid as he id still recognized girl 2, so I went that disabled the blackberry Protect and thought that I could change the z10 for my daughter 1. However he won't let me. He says link bb if I want to change the owner of the device, I have to wipe the device and enter the details of the new but he does not accept, it is a problem because I did not disable protect it first or...?
Thank you very much
Hello and welcome to the community!
From what you report, the device must be at the level of 10.3.2.xxxx OS, which includes protection against theft of Government mandated function. Therefore, there is only a process appropriate to separate the association between the BBID and device:
- Complete the initial configuration, using some credentials that are last BBID successfully on the device
- On the device, initiate a security WIPE, again entering the same credentials BBID
- Spare - first of all, on the device, turn off BB Protect, entering these same credentials BBID, then initiate the security WIPE
- When ERASING is completed, you can use/create a different BBID with the device
Only this exact sequence can succeed... nothing else. Any deviation, insertion of additional steps, removing steps, etc. cancels the procedure.
But what concerns me now is the following:
keefrto1 wrote:
so I got that off the blackberry protect and thought that I could change the z10 for my daughter 1. However he won't let me.
I don't understand what you were doing there. I hope that you have done step "Alternate" I mentioned above, in which case you can move on to step 3 to complete the process.
Good luck and let us know!
-
Q10 Q10 blackBerry Notification light
I've had my Q10 for 4 days now. I noticed the light notification that will stop flashing, it will not stop. I checked my hub and no new notification. I tried the search without success. Why it continues to Flash?
Have you tried to do a hard reset on your Q10?
To perform a hard reset on the BlackBerry smartphone, follow these steps:
- Remove the battery cover at the back of the smartphone.
- Remove the battery and reinsert it and then after a few seconds.
- Replace the battery cover.
-
BBM Smartphones blackBerry of BB10 (Z10) to PRIV chat history
Hello
How does a transfer BBM Chat history of BB10 (Z10) for the PRIV?
History of cat BBM not under not the migration app.
Harjbb
I'm sorry, but you can't. On iOS, Android and BlackBerry 10, the BBM app does not record the history of cats in an accessible location. Only the group chat history is transferred.
-
If I go in the "Notifications" screen and select 'normal', exit, then go back, it no longer shows 'normal '. It shows nothing selected. Also both the noise and vibration are 'off' and I can't do "power." Suggestions please!
Keep it up and down buttons for volume at the same time for 20 seconds. Ignore everything you see on the screen until the "BlackBerry" is displayed. Once your phone restarts, try once more and post back with your results.
See you soon.
-
WebWorks 2.0 - 2.1 BlackBerry device Simulator &; Z10
Hi BlackberryDev,
Please someone knows the ***@Media queries * to target Blackberry 10 platforms i.e. Z10, Z30, and Q10
More Blackberry 10 Simulator 2.1 sizes are NOT ACCURATE...
I have a Z10 - camera inside the web Inspector in my Webworks 2.0 application... I check window.innerWidth and window.innerHeight ... The result I got from the Simulator is different than the device... I do not understand WHY
CSS my app looks good on the device, but the CSS is disabled by 40px on the Simulator...
I'm sticking with the CSS I used for the device... but the problem is that I have to create a different CSS to the Q10 and Z30... So I need a precision @ Media query that I can use to target Q10 and Z30
I don't want to use any library such as JQMobile or BBUI... I want to use pure CSS that I'm comfortable with.
Thanks in advance.
The dimensions of the display of these devices include (height x width):
- Z10 - 1280 x 768
- Z30 - 1280 x 720
- Q10 - 720 x 720
Device for these pixel ratio is 2.2437500953674316, which means that the following media queries should provide what you need:
Check out this excellent article, written by my colleague Anzor, support BlackBerry 10 sizes of screen:
-
World of blackBerry BLaCk BeRrY Z10
my black Berry opens not only loading with circle and opened
Hello humam146,
Welcome to the BlackBerry support community.
Thank you for your question about BlackBerry World showing the circle of rotation when you access the application on your BlackBerry Z10 smartphone.
The following article will help you to solve this problem:
Let us know if that helps.
-
BlackBerry Tethering with Z10 Z10
Is anyone know, a Yes or no answer? Is blackberry connection REQUIRED to attach? I thought that as long as it is available in your DATA plan, you were all together. Works fine for me, but my clients continue to is 'need to load drivers? Any suggestions?
I think it's the only way. With the former Office Manager could install all the drivers for the Manager of BB, but I don't think that is the case with BB10.
Your client Z10 only hotspot feature? I have not attached over the years.
Maybe you are looking for
-
Hi all I have two functional screw a loop a set of read and write tasks with device 1 (NI USB-6008). The second loop a set of writing with device 2 (another NI USB-6008) tasks. 2 VI has a massively slower than VI 1 time scale, which means that it m
-
I can script volume shadow copy service files to copy VSS files to another server?
Hello Wanted to ask if it was possible to take the info created by VSS and move it to another server? The reason why I ask is that I need to information to a file on a backup server, copy it to another standby server and have it ready to go when the
-
Vista has stopped working so I reloaded Vista from my recovery disc. All my applications are lost but it created Windows.old. When I "right click" Windows.old one option is to restore a previus version. If I restore it will be just restore to a ve
-
Is there a document identifying all the directives of a config.xml file
The document found here comprehensive? http://docs.BlackBerry.com/en/developers/deliverables/30182/Creating_a_BB_Widget_configuration_docum... I'm looking for something that tells me that all permissions, all the transition effects, basically everyth
-
HelloWhen I want the speed of the ramp of a clip that I turn the optic flow or is it important?The two are connected in any way?RPhil