BlackBerry OS 5 - scroll does not

Similar Questions

• On my trackpad scrolling does not work after the upgrade to 12.0

  On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

  Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.
  
  Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • http://KB.mozillazine.org/about:config

• Scrolling does not work on Satellite Z30-A-1DJ

  Hello

  Summer on the internet trying to find an answer for my problem; How to make scrolling, pinching etc on my touchpad?

  Scrolling never works with this laptop (2 months) and up to now, even moving cursor was not reliable, since sometimes when starting the laptop touchpad was completely dead and has not reacted to what.

  Now there seems to be problems with it since I uninstalled the driver for the touchpad and restarted my computer, but still scroll does not work.

  Troubleshooting for this problem was no good.
  They all lead you to the first research of mouse in the start-> mouse-> advanced properties screen and from here you can adjust the parameters of mouse pad.

  I don't even have this tab on my laptop, while all the others are there (buttons, pointers, pointer, material options).

  How can I adjust the settings of touchpad on Satellite A-z30-1DJ?

  The characteristics mentioned touchpad should be accompanied by software as hardware.
  There are standards of touchpad different as Synaptics, Alps, but also momentum that support different features and different software.

  In the case where this software isn't installed or is not working, the touchpad to scroll as well as other features are not available.
  It could also be that tactile built-in module support no additional features.

  To my knowledge the Satellite A-Z30-1DJ should be equipped with an Alps Electric touchpad and this touch pad is different and does not support the same parameters as MOMENTUM or Synaptic touchpad.

  However, as you said, the additional parameters for touchpad Alps Electric are in
  Control Panel? mouse? last tab (Advanced)

  If you wish, you can try to install the driver for the Synaptics touchpad that has been released for other series of laptops as Portege Z10T-A

  I'm not very well if this Synaptics software would work correctly under the Alps touchpad m power but its definitely worth a try.

• Tecra A7-202: Touchpad driver virtual scrolling does not work

  Hello, I have problem with Synaptics touch pad driver version 9.1.0 (laptop Tecra A7-202).

  When I run any program as administrator, virtual scrolling does not work.
  When I run the program as a normal user, everything is OK.

  Hello

  What's your Tecra preinstalled with designed Toshiba recovery image?

• Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

  Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

  Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

  I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
  Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

  I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

  Help required, please.

  Hello

  Uninstall the existing touchpad driver and install it:

  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

  Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

• W520 Trackpoint scrolling does not work in Lightroom

  I am trialing Adobe Lightroom and scrolling does not work with the Trackpoint unless I click on the scroll bars. I have not had problems in all the other apps but have not been able to find a solution for Lightroom. Any ideas?

  
  

• my scrolling does not work on my laptop? Help, please

  my scrolling does not work without the key and hold. Help, please?

  Hello

  · What is the operating system installed on the computer?

  · What is the number and the model of the laptop?

  · Will there be any changes made on the computer before the show?

  I suggest you to access manufacturer's website and check if there is the latest drivers or patches published for touchpad that you can install for your laptop.

  See: to update or change a device driver: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/devmgr_changing_drivers.mspx?mfr=true

• Synaptics touchpad two fingers scrolling does not work in the player to develop modern UI application Windows 8.1

  I have a HP Envy TouchSmart UltraBook 4-1161er. Two fingers to scroll worked well in all modern user interface applications that come with the pre-installed operating system Windows 8.1, but the situation changed after the upgrade to Windows 8.1. Now this excellent and very useful two fingers scrolling does not work in the updated reader application. How to make it work?

  If the problem is in the drivers, maybe, install the drivers the latest may correct this?

  I tried to find the latest drivers for the touchpad Synptics in my ultrabook on the HP website, but it's the same old v16.5.3.3, I already have (published in may 2013). Synatics official site contains a link to the latest touchpad driver pack v17.0.19. Can I install it?

  I would try to install the Windows 8.1 (64-bit) driver Synaptics touchpad available in the download section of your sleekbook web support before using compatibility mode.  If the current driver does not work for you, try the earlier versions available .

  If you have no positive results, then use the compatibility mode (select Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most recent.

  To use compatibility mode to install the driver just softpaq to the right, click on the file and choose troubleshoot compatibility. Select Windows 8 and run the installer.

  The following video has a decent explanation, but the Narrator does not get to the point for a bit. Go directly to the minute 4 and watch it from there.

• Use Microsoft Wireless Notebook Laser Mouse 7000. Horizontal scrolling does not work

  Original title: mouse scrolloing problem

  I just bought a Microsoft Wireless Notebook Laser Mouse 7000 and my scrolling does not work, is their a way to implement or to solve this problem?

  Hello

  1. the problem occurs on a particular application?

  I wish that you follow all the methods in this article to resolve the problem.
   
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• The touchpad scrolling does not work

  I need help, vertical and horizontal scrolling does not work after the computer wakes up to the top of falling asleep or hibernating.  When I initially start the computer since the closure it works and it works again when I restart the computer.  I know how to change the settings for it, like one or two fingers to scroll and it turn on or turn off, but the settings are correct and scrolling still doesn't.

  My computer is a HP Pavilion dv6 (VX070AV) and only 3 days.

  You have tired of the touchpad driver update? I guess you are going to have Version 14.0.19.0

  Here is the link, just in case... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-85175-1&LC=en&DLC=en&cc=us&OS=4063&product=4221638&sw_lang=

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Scrolling does not work on some applications

  I use the program Notepadd ++ and I can't use the touch pad to scroll. I plugged in a USB mouse and scrolling works very well with this device. I tried reinstalling the drivers, etc., and it still has the same problem. Also scrolling does not work when you play videos flash on Firefox. Again, scrolling works very well when you use a USB mouse.

  Name of product: notebook PC HP Pavilion g6

  Product number: B5R80UA #ABA

  ih23,

  After doing a little research, it seems that programs are in conflict with the driver and you are not alone in this experience.

  Here's what I found to solve the problem in Notepad ++. Note to change the registry, depending on how comfortable you are with it or not, it's you if you want to try this fix or not. I always recommend to back up the registry before you change anything.

  "It seems that everything that makes the Synaptics driver to display the slider is confusing Notepad ++."

  "If you go to HKLM\Software\Synaptics\SynTPEnh and add a new DWORD value named UseScrollCursor with a value of 0, the slider will not appear and vertical scrolling will work in Notepad ++.

  Good luck!

  -Kyle

• BlackBerry smartphone touch screen does not work, 2 phone... Torch = junk

  It's my 2nd my first Torch torch touch work stoppeed and ATT sent me another...

  Now this torch touchscreen stopped working, so far, I did a reboot hard and soft...

  now I can do a factory reset or downgrade...

  IM starting to think that the torch is undesirable.

  Well, I talked to ATT tech support and I actually finally got through to BB and they open a case and gave me a number of good ticket for 3 days...  The first tech support was a dunce and she told me that 7 hours was taken long to upgrade software, so she told me to unplug and re install...  That solves nothing, only bricked my torch, even though she was right about one thing 7 hours is far too long, but it does not solve anything...

  then I recalled in support of BB using my ticket number... and here I actually spoke to somebody who knew what he was doing...  We connected through desktop remotely, and he guided me...

  He told me to never update device software when the software asks you to update...  I told him, I was getting a white screen and it says App Error 200...  He told me that we have a clean wipe and install everything new facility...  He has directed to the site from ATT and I DL the latest peripherique.246 software...  Then after it DL'ed I installed;...

  then he had me to connect the device again AND GO INTO PROGRAMS CAN record B\LACKBERRY

  then find charger, here, he had me select the apps I would like to, and then click Next...

  then after 5 minutes it finished loading, he then told me to wait another 10 minutes for the device to reboot and then my torch works!

  If anybodys touchscreen doesn't work more or torch is made of bricks, I highly recommend doing this procedure...

  I called BB again and had them send me an email for accurate insrucions, so I recorded in case this happens again... Here it is...  Keep in mind first you need access to the ATT site will link you to the site Web de Blackberry and then DL file then open and install and do the following...

  Check that the device client software is installed on their computer, or it won't work.
   
  1. click on the start menu
  2. go in my computer
  3. go in: C:/Program Files/Common Files/Research in Motion/Apploader
  -If its 64-bit windows, it will be C:/Program Files(x86) /Common Files/Research in Motion/Apploader
  4. double-click on "loader.exe" (it may be called "loader" according to windows settings)
  5. a window opens saying "welcome in the application loader wizard." Click next
  6 next, where it is written 'Connection' to ensure that either "USB - PIN:" or "USB - PIN: UNKNOWN" appear. ""
  7. click on next. It take a while to connect to the device and then view the Application selection screen.
  -L'application selection screen will be a list of application control.
  -Items that are checked will be installed, if they do not already exist on the device.
  -Items that are not checked will not install, and if they already exist on the device they will be deleted.
  8. ask the customer to scroll through this list and check all applications they know they would like on their blackberry.
  9. once everything looks good, click Next.
  10. click on the Advanced button.
  11. make sure that 'remove all previously installed applications' and "Delete all application data" is checked.
  12. click Next.
  13. If loader.exe asks you if you want to automatically back up and restore data, select "do not automatically backup and restore."
  14. click Next and then finish
  15 advise the customer that this process can take anywhere from 20 to 40 minutes, and everything they do during this time is to ensure that the blackberry is connected. The first time that their blackberry starts after this process, it will stay on the screen of the hourglass for about 10 minutes, nothing to worry about.
   
  Once the client can see the home screen of their blackberry, they're OK disconnect.
  The customer will have to re - turn on their radio, they can do so by going to manage connections > select Mobile network

  Sincerely,

  Sarah
  BlackBerry customer support
  Research In Motion Limited
  Tel:
  NA toll free: 1-877-255-2377
  UK toll free: 0808 100 7466
  Europe: + 44 1753 558400
  Around the world: + 1-519-888-6181
  E-mail: [email protected]
  Web: www.blackberry.com

• PowerPoint for Mac bar vertical scrolling does not work in the Sierra

  I have downloaded Sierra, open a PowerPoint for Mac 2011 version 14.5.4 and immediately noticed that the vertical scroll with my mouse does not work. They're only going to 'up' (for example, slide 14, 13, 12, 11, 10) or will be stuck between 2 blades.

  I unplugged and replugged my mouse, turned PPT market twice and rebooted my MacBook. No change.

  I know it's early days and these are the pains of growth with the new OS, but I use PPTX constantly.

  Any tips are appreciated.

  Have the same problem. I don't know that this isn't a mouse problem because it happens when I use the touchpad as well.

• Two finger scroll does not work on the new MacBook

  Did I miss something? Hold scroll a window or a list using trackpad and not the scroll bar lift - but it does not work as advertised.

  The this MacBook, literally 'new', i.e. bought Apple in the last week or two? You have installed third-party extensions that could affect the mouse/trackpad settings?

  C.