Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

Similar Questions

• Satellite L20-100 Touch Pad scroll does not work for Mozilla Firefox

  Hello

  Mine is a laptop Satellite L20-100. My touch pad scroll (the page scrolls automatically when you slide your finger upwards & downwards on the right edge of the touch pad) does not work for the Mozilla Firefox browser. It works fine with other applications like windows Explorer, microsoft word. When I try to scroll in the window of the Firefox browser, this isn't schroll at all. Please can someone help me?.

  Kind regards
  Anish

  Hello

  Read on the forum of Firefox:

  http://forums.mozillazine.org/viewtopic.php?t=221466

  If it doesn't help you, after your problem here

  Post edited by: Jeka -?

• Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7

  I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work.

  What can I do?

  Hi navarone_1,

  This means that the work of FN keys and you can t use the pad touch, right?

  Well, in this case I think that the touchpad is disabled with FN + F9 key combination and therefore, you must install the Toshiba tools to activate the FN keys.

  You can find all the drivers and tools for your laptop on the Toshiba official European page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You need Support Flash Cards of value added and utility package. These two tools should be released for Windows 7. For Windows 7 32 bit, you can find package of added value but Flash cards Support utility you must download it from another laptop, e. g. Satellite P500. It should work on your model too.

  Last but not less than first installation package of added value and Flash then cards support utility.

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Satellite A200-14F - standby and hibernation does not work

  Hello
  I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

  I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

  If you have had the similar problem please write what I have to do.

  Concerning

  Hello

  > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
  After Installing Win XP, you must update the BIOS to the XP version.
  You should check the page European driver of Toshiba. There are BIOS for Win XP.

  After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

  Welcome them

• Satellite A200-10N (PSAE3): Fn key does not work after upgrade to vista any time

  After upgrading Vista-Home - Premium--> Vista Ultimate shortcut with the fn keys does not work, for example Fn + F6/7 (brightness).

  New value pack installation has not been successful.
  Moreover, after upgrading the drive to DVD from Toshiba is default, too.
  Who can help?

  I didn't try any update on my A200 but you can try to follow: install Vista using recovery media delivered. When Vista starts for the first time go in Panel and you can find Add/Remove Programs option. Remove all the stuff designed by Toshiba.

  When we remove everything, making Vista upgrade. After finishing Vista upgrade install all the stuff of Toshiba designed by order of specific facilities starting with added value package. Check please the download page if all of these tools and utilities are available.

  As far as I know all the tools and utilities are designed as universal tools and I can't imagine that there is a difference between the version of Vista ultimate or premium tools.

  DVD player is part of the image of the installations only and I can imagine that upgrade installation has changed something, but the upgrade procedure is responsible for this. I don't see any connection to Toshiba.

  As I said I don't have a CD to upgrade, but if I find one I'll try to test it on my Vista (Premium) preinstalled A200-1CR.

  Bye and I hope that you report your experiences with the Vista upgrade again.

• Re: Satellite A200-1Mes: XP audio driver does not work

  Hello
  I have a problem with my audio driver (I use windows XP). I installed all the drivers xp and still does not work.
  Can someone tell me where to find a driver?
  Thank you.

  I hope that you are using Windows XP SP2 home edition. Anyway check it please this thread. Try using the instruction given by Eldorado.

• Left click the Satellite C660 Touch Pad/buttons does not work

  Hi guys!
  I own a Toshiba Satellite C660 (of course: P) anyway. Today, I was just doing what I do usually on my laptop,
  when suddenly the left button of the mouse has stopped working. (Bare with me, it's very weird to explain xD!) Also I can not 'left click' on my touch pad. I can still move the cursor with the touchpad and right click with the right button.

  I tried slightly shaking incase of crumbs, or something. Although I never eat around my laptop. It is not difficult to grow as there is something under it, it just doesn't work!

  In summary, I can't left click. But I'm able to move and made a click right, weird!

  For the moment I have my USB mouse plugged in my computer and it works fine, but it is very annoying!

  Sorry if I don't explain it too well!

  Help, please!

  On this virtual path, it is not easy to say what the problem is here. It is not easy to tell if the left touchpad button is faulty or disabled in some way.

  As a first step, you should check all the settings for the touchpad. If your laptop computer has preinstalled software check Synaptics all parameters associated with the touchpad buttons.

• Satellite A200 - 25 X - remote control does not work on Windows 7

  Hello

  I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

  Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

  I hope someone here can help me.

  Thank you

  Hey,.

  Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200

  Check this box!

• Satellite A200-12 x starts but does not work

  Hello

  I had a satellite A200-12 x for almost a year with no problems at all until now.

  Since a few days ago, the computer starts up but when I get the password for my user it stops near work. The hard drive light stays on no - intermittently and made a little sound of cracking at regular intervals. It takes the computer more than 10 minutes to let the blue startup screen, then that more than a half hour to show my desktop. The hard drive light will occasionally be blink, which is when the computer appears to contribute normally, but only for a second or so. When I gert on the desktop, the light remains the same way and I can't work with it at all.

  It works ok in safe mode. I tried to restore the system, but it does nothing.

  Can someone help me?

  Thanks in advance

  What you mean to restore the system? Did you install OS using DVD recovery delivered or just roll back the OS to an earlier time using System Restore tool?

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• Toshiba satellite pro U 400-18 microphone does not work

  I install windows 7 on my laptop Toshiba satellite pro 400-18 U, after everythink is ok without a microphone does not, what can I do, please help

  I install windows 7 on my laptop Toshiba satellite pro 400-18 U, after everythink is ok without a microphone does not, what can I do, please help

  Please visit the Web from Toshiba site for the latest drivers for your sound card. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Satellite A200-1VP - new WiFi card does not work

  Hi all

  I just bought an intel 4965agn wireless card to replace the original card intel 3945abg. I bought the card on ebay, it's a computer dell laptop.

  I installed it (connecting the black wire on pin 2 and the white wire to Terminal 3). The device appears in the device manage correctly without any problem. I installed the latest driver from intel for this card.

  the problem is that no wireless connection cannot be captured. the utility intel built in diagnosis, the card seems to fail the test of material. The section troubleshooting said to check the Device Manager and install the appropriate drivers. I've done it before, so I'm not sure of the problem.

  any ideas?

  Thank you

  Hi ansarali,

  Why you traded a new WLAN draft N card if you can t use it? I want to say that your laptop was only equipped Intel abg card and for standard project you also need 3 antennas and as much as I know Satellite A200 are not equipped with 3 antennas

  In addition, the antenna cables must be connected correctly. This means that you must connect the white cable to the HAND and the black cable to the auxiliary voltage
  Check this box!

• Satellite A200 + Vista Ultimate - power management does not work

  No matter what I apply to the power management settings of the screen never goes and the PC never sleep or standby extended. Screen saver does not either - except once - yesterday, for the first time since I bought the PC in August. Has not yet done.

  I assumed that this is a bug in Vista. "Tech Guy" PC World (ha ha) cannot repair. Is it at the level of the BIOS or something else? Of course, there is an incompatibility between the OS and the hardware. Video chipset? If you choose a balanced power management, the screen slightly off if you take out the power cord, but that's all that happens. Power management is all set to default.

  It's exhausting, because whenever I want to leave the PC for a while, I have to put it to sleep manually.
  Anyone got any ideas?

  Thank you

  Peter

  Post edited by: admin

  Hello Peter

  First of all are the guys responsible for tech updates? They must offer that you support for the hardware you have and clarify also all problems, if you use a preinstalled recovery media.

  Upgrade is your decision, and it is possible that it may have some negative influence on the functionality of the OS. All this is quite complex. As you know Vista has own power management options. Toshiba install PVAT (ValueAddedPackage) and after doing this there are some additional settings.

  The question is: How did you get the OS upgrade? Did you do a clean install? Have you installed all the stuff from the download page of Toshiba including VAP?

  With other words: all the basic settings on energy consumption are defined in the BIOS. AFAIK in Vista is the management of clean energy implemented and Toshiba installed just a plugin. If these rudimentary BIOS settings are not changed, I guess everything works fine. Change the settings of the BIOS with an update, I can imagine that different settings will not work correctly.

  Hmm, that's really not easy to say what you can do. Maybe check for the last update of the BIOS and after doing that it is trying to put the clean install of Vista Ultimate. And, of course, you must install all the stuff from Toshiba following the document of instructions for installations.

• Satellite A200 - output TV s-video does not work

  I'm trying to connect my laptop to the TV using an S-Video cable.
  Followed the instructions but no picture on the TV.
  I checked the lead for continuity and it's OK.

  All apprechiated ideas

  Hello

  Have you used the FN + F5 key combination to switch to the TV device?
  Have you enabled the s-video on your TV?

  Please this first!

  Some graphics cards provide special settings to activate the TV-out.
  Generally, you will find this option in the properties of the graphics card-> advanced settings

  Can I ask you what model of laptop Sat A200 you have?