Similar Questions

• Smartphone blackBerry Bold 9650 removing the Sim Card

  Can anyone give me simple instructions on how to remove my sim card from my Bold 9650? Tanks

  If you go to this page:
  http://us.BlackBerry.com/support/blackberry101/#tab_tab_bold
  Choose your model and have a guide on your blackberry.

  Kind regards
  Giuseppe PIgnataro

• Insert/remove the sim card

  Hello guys,.

  I was wondering if it's ok to insert or remove the micro sim card when the phone is turned on, or when it is off but load?

  It will damage the phone or is it OK to do?

  Thank you

  Hello

  If the phone is off you can insert and remove the micro sim card card whenever you want.

  There should be no promlem it when the phone is turned on either. I made it myself with different phones and watched others making and have found no problems so far. Although I noticed that in this case, it was more difficult for the phone sometimes to connect to the carrier and I had to do it manually.

  Anyway, you better refer to the manual of your phone and check if she says nothing about it.

  wah007 wrote:
  Hello guys,.
  I was wondering if it's ok to insert or remove the micro sim card when the phone is turned on, or when it is off but load?
  It will damage the phone or is it OK to do?
  Thank you
  

• Portege R500 with 3G - Instructions for the insertion of the SIM card

  I have a model PPR50E R500 which I think has built in 3G. Howevere I can't find documentation on how to insert a SIM card. One of the other model seems to suggest that the SIM card is inserted behind the keyboard. Can someone point me to some training documents please?

  Unfortunately there is no documentation available. (Maybe in the user manual, but if there is nothing, then you won´t find anything)

  Here are some instructions on how to swap the SIM card on a Portégé R400, so I think that since both machines are quite similar, that the guidelines would apply to the R500 too:

  Perform the following steps to insert/remove the SIM card:

  1. close the machine OFF completely. Make sure that the POWER LED is not lit.
  2. remove the AC adapter, battery and all connected cables/devices.
  3. open the screen.
  4. remove the keyboard cover with a small screwdriver flat blade in the small hole on the edge of the cover and pulling gently out.
  5. remove the two screws that hold the keyboard and knock it gently over the keyboard. (Use a small cross-slot screwdriver to unscrew the two screws).
  6. to activate the keyboard down, take the upper end of the keyboard, pull gently upwards and place the keyboard with the keys down on the palmrest of your machine.

  * ATTENTION: *.

  {color: #ff0000} + do not touch the keys on the keyboard to return back. Make sure that you hold the keyboard on both sides and ask gently down on the palmrest. +
  + The keyboard is connected to the machine with a flat cable. Avoid pulling the cable on the connector or damage! +
  + Avoid dropping objects (such as paper clips, etc.) inside the machine. A metallic object can cause a short circuit on the motherboard, which would cause serious damage to your machine. +
  {color}

  7. search the card slot SIM on the upper right corner of the machine.
  8. slide the locking mechanism of the SIM card with the fingernails or a small object slot to the left to unlock. (You can also use a small flat blade screwdriver)
  9 pull gently until on the SIM card slot.
  (10 a) Insertion: insert the card into the SIM card slot. The filings of the SIM card must show an upside.
  (b) removal: remove the SIM card from the slot

  11 turn the slot down and block it by sliding the lock to the right.
  12 insert the keyboard by placing the clips on the bottom of the keyboard into the grooves on the top of the palm rest. Rabat the keyboard gently downwards and fix it by screwing the screws into the holes. Make sure that no screws were dropped on the inside of the machine!
  13 install the support of keyboard on its position and push down to fix its position.
  14 attach the adapter sector, battery and all cables/devices.
  15 enable you wireless device by pressing "FN + F8" when you work on Windows.

  * I must warn you, it s on your own risk and if you do not feel comfortable with the installation procedure can put the machine to an authorized Service provider, which can make the installation of the SIM card for you.*

  Good luck my friend :)

• Beginner wx345 how to remove the sim card

  Once I deleted block I see sim. a video utube about the abduction. no joy. asfraid I'll break all restraint, which I think is present to keep sim in. or he did often another non-smart telephone it is odd in some ways seems designed for very untech people which makes it more difficult to ACTIVATE for me lol.

  Hi John,.

  to REMOVE the SIM card

  it slides right in the WX345

  the metal support is stopped (it does not flip open)

• BlackBerry smartphones remove the Sim Card from storm

  How do you 'delete' the SIM of the storm? I know that the battery has been removed. I tried to delete it, but seems to be stuck? I looked into the Blackberry site, but it does specify that on installation there. The SIM is uder a metal clip, I can "move". No problem with the phone or the sim card, but maybe later, that perhaps I need to remove it. Thank you.

  Maybe I have use a small screwdriver and try to lift the clamp metal, to see if that helps, too. Thank you.

• BlackBerry Q5 cannot remove my sim card

  Hello, I have been using my BlackBerry Q5 for a long time, and everything has been working fine, no problem. But now, when I want to remove it, I can't, or I do not know how. I have the Micro-Sim Card and I already asked a few people, but nobody knows. I thank very you much for any help.

  Open the hood > slightly press the SIM card already inserted

  You will hear a slight click and it should appear for removal.

  Do not pull the SIM card with first pressing it to dislodge.

  Look at this for more information.

• BlackBerry Smartphones moving to the Sim card contacts

  Anyone know how you can copy contacts from the sim card...

  I sometimes need to change phones etc would therefore save them on the map as well... couldn't find a way in contacts to move outside to copy contacts from the sim card in the phone?

  Hello

  The answer was about ten threads down!

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=9500&thread.ID=410

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• How to insert the SIM card into the flame

  Hello

  I'm trying to put my SIM card in a phone of flame, but I don't know how to do it.

  I try to place the card in the slot, but the slot is higher than the card, I do not know if I put the card good or bad. The message still says "SIM not detected." Can I restart the device every time I slightly move the SIM card to force recognition?
  I have to do something else with the SIM card?

  PS: The flame brochure says in 2 different places ("see Insert or remove the SIM card '), but this article does not appear in the brochure.

  Hi xabitubbi,

  No, the flame device uses a SIM to normal size. Yours is a micro-SIM.

  You should contact your operator and ask for a normal size SIM card that fits on the device of the flame.

  -Ralph

• Re: Satellite L500D - how do I remove my sim card

  Hello
  I saw the slot for sim card behind the battery and then to put a sim card, but now I have no idea how to get it.
  Can someone please?

  Hello

  > I saw the slot for sim card behind the battery and then to put a sim card, but now I have no idea how to get it.

  Check your, user manul, it must be described how to insert and remove the sim card

• Blackberry blackBerry Passport passport is not read sim card

  My passport for blackberry does not read my sim card that works perfectly on my iphone 5.
  I read about this situation and almost everyone said they should send their device to be replaced by a new.
  I'd appreciate it if someone from the support team can respond and help me ASAFP

  In fact, I slept last night, inserted the sim card out and restarted the phone like 7 times. Whenever I restart it is detect the sim card, but there is a problem of mobile services or it just does not detect it at all. In any case after my last reboot of the phone he detected the SIM perfectly and now it works fine. I guess that it just has his moments, but I'm goona be sure to never to come out again because it works now lucky and the number of attempts.
  Thanks anyway I really appreciated that you take the time to help me @aiharkness

• Ringtone to blackBerry Smartphones access to saved on the SIM card

  I recently acquired a Blackberry Curve and kept my old number/SIM. Before inserting the SIM card, I saved a few rings on it and now can't access set as a rington.

  Can someone help me out here?

  See you soon

  Having had other 'games' I found how do:

  Went to the advanced option menu button then the ringtone setting (normal, phone off, vibrate etc) button and show tunes. This takes me to the SD card, which I guess is my SIM card (or what was my SIM card in the old phone) and I can then select the melody to set like the ringing of the phone.

  Thanks for advice.

  Concerning

  JEC74

• BlackBerry Smartphones AT & T 8310: SIM Card - SD card, how to use both at the same time?

  Just got my AT & T 8310 today so I apologize for my newbie question, but I want to install an SD card, but looks like it's going where the card SIM - does that mean that I have no telephone service I have the SD card as the SIM card is removed or am I missing something obvious?

  Hi and welcome to the forums!

  How about a coup! :

  http://CrackBerry.com/BlackBerry-101-Lecture-6-How-install-microSDHC-card-your-BlackBerry

  If this answers your question please solve the post, if not please ask for more!

  Thank you!

• The SIM card inserted in this iPhone does not appear to be supported.

  The SIM card inserted in this iPhone does not appear to be supported.

  The SIM card that you have currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert a different SIM card of a carrier supported or to ask that this iPhone be unlocked by your operator. For more information, contact Apple.

  < re-titled by host >

  Not sure what your question is. The error message is clear: the device is locked to another carrier. It must be unlocked before you can use the SIM card, you try to use. Contact the carrier to get it resolved. Only they can help you with this.

  See you soon,.

  GB

• BlackBerry Z10 Z10 - NEW STOCKES CONTACTS ON the SIM card

  Nice day

  I'm crazy for trying to save a new contact on the memory card.

  I discovered yesterday that all new contacts (phone numbers) registered since I got Z10 are on my sim card.

  Can someone explain to me how to put the memory card instead of the sim card?

  Thank you very much

  Concerning

  Hey mamario62,

  Thanks for the quick response.

  Regarding the backup, you can back up your data that includes the contacts through the link of BlackBerry.  So if something happens, you can restore this backup file on the smartphone BlackBerry 10.

  Currently two-way sync is not available in the connection of BlackBerry, only import is available.  Two-way synchronization will be available at a later date.

  See you soon!