BlackBerry Q10 cut and paste problem

Similar Questions

• Cut and paste files

  All those who use VMWare Player could cut and paste the files on a DVD RW drive on a comments system? Thank you.

  ODA

  ----------------------------------------------------------------------------------------------------------------------------------------

  14/01/2011

  Found a solution for the "DVD RW cut and paste problem" in my Windows XP feedback system.

  Installed the package free writing Drag2Disc software for Windows Vista (32 bit, 64 bit), XP (32-bit, 64-bit) of IBM/Lenovo on system invited and formatted a DVD disc.  Everything seems to work fine on the DVD RW drive systems of the host and the guest.

  The available Drag-to-Disc packet writing software can be downloaded from the following site:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo & lndocid = RAHUL-40970

  Thanks for the suggestions everyone.

  ODA

  you set up the writer as IDE

  in my experience, you must configure it as SCSI
  See http://sanbarrow.com/vmx/vmx-cd-settings.html

  even then, I'm not sure if the packet writing is supported - software for CD burning ordinary as Nero and others should work well

• having problems with cut and paste - picture is black

  Original title: copy / paste black blob Hi... I have a problem with sometimes to cut and paste where I eventually stick no more that a "black blob" that seems to be a chart... that is, it can be stretched in a big black blob. Seems to happen especially when you use ctrl c and ctrl x and can be when the target application has not already been opened. Open the target application and use drop-down cut or copy seems to work OK I can say.

  Any ideas how to fix this please?
  JM

  Hello

  ·         Since how long you are facing this problem?

  ·         Did you change your computer before this problem?

  I suggest you run the System File Checker and see if it works.

  http://support.Microsoft.com/kb/929833

  I also suggest to check again user account and see if it works.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• How to cut and paste the image of the body of the received email

  I'm trying to cut and paste an image included in the bottom of an email and insert it into a Word document so that you can size and print. I can highlight, cut it with Ctrl C, paste it into the document Word with Ctrl V, but the image doesn't show, although the picture frame appears when I click on the place where the photo was pasted. Framework, but empty, no image. Any thoughts?

  Thanks to everyone for their help.

  The problem has been resolved - to try and finally understand everything.

  If you encounter this problem, it is perhaps because, unless you know the file format of the inserted picture, programs can not figure it out for you. Place your cursor on the image, right click and save the image under a .jpeg instead of simply copying. Then work with the file .jpeg in any photo management program you use normally - or even insert it in Word.

• Photos of El Capitan do not cut and paste

  It does not try to cut and paste a picture of pictures to Keynote. Other responses it doesn't paste into a Word doc. This problem seems to have ravaged the Yosemite as well. I was not able to find a solution for Mac. Seems odd that Apple would abandon its more useful features. And Ineed to create presentations using photos stored in the Photos...

  Select the photos in Photos and export (File menu ==> export) in a folder on the desktop and use there

  LN

• When I cut and paste a subfolder of an excel file, the files in the subfolder are missing

  When I cut and paste a subfolder (which contains the files) to an excel file, the files in the subfolder disappeared. I didn't then properties and wer there are no previous versions of the files. Also note, glued folders are there but not files

  What version of Excel you use (Excel 2003, Excel 2007 or Excel 2010)?

  This problem occurs with a specific folder?

  Is the Excel file that is saved on a network or on the local computer?

  Check if the files are hidden, for any information to show all hidden files, you can check the link below:

  http://Office.Microsoft.com/en-us/Excel-Help/view-all-hidden-file-types-and-file-name-extensions-HP005195524.aspx

  Excel application doesn't have any role in cut\paste of files even if the files contain Excel documents.

• Impossible to make the cut and paste it into all programs

  Original title: I run Vista on a Viao and lost my cut and paste ability, in all programs, in Word and Internet...  Any ideas of how I can retrieve this function?

  Any thoughts?

  Hello

  1. what exactly happens when you try to copy / paste?
  2. do you receive any error messages?
  3. did you of recent changes on your system prior to this problem?

  Method 1: I suggest to try the steps mentioned below and check if it helps to solve the problem.

  Step 1: Start the computer using safe mode with networking.

  (a) Remove all floppy disks, CDs and DVDs from your computer, and then restart your computer.
  (b) If your computer has a single operating system installed, press and hold the button F8 as your rebooting the computer.
  (c) you need to press F8 before the Windows logo appears.
  (d) if the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  (e) in the display Advanced Startup Options, use the arrow keys to select the desired mode safe mode with networking option and press enter.
  (f) log your computer with an user account with administrator rights.

  Reference: http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Check to see if the problem persists in Mode safe mode with networking. If the problem does not occur in Mode safe mode with Networking if you please try the next step.

  Step 2: Try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 3: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Can't cut and paste text in emails

  I used to be able to cut and paste text in an e-mail, but now when I give the command paste (Ctrl V) my internet connection was closed.  This failure has begun after you convert the free trial version of McAfee (new computer) to the full membership, but maybe it's a coincidence.

  You have McAfee analyzes your email?  McAfee email scanner is one of the two biggest troublemakers known to Windows Mail.  You don't need it.  Uninstall McAfee, download and run their removal tool to clean the debris, uninstall leaves behind, and then do a custom re - install and select do NOT install any features email scanning.  See if the problem persists after that.

  How to uninstall or reinstall supported McAfee consumer products using the McAfee Consumer Products Removal (MCPR.exe)

  Why you don't need your anti-virus program to scan your e-mail
  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Unable to get the preview of images that are cut and pasted from desktop folder to external hard drive.

  Original title: I imported the photos of my card SD by cutting and pasting etil worked very well but when I did the same thing to the table and stuck in the external hard drive, I can't not open images as it is said no preview.

  Only this particular file does not open and you please help u to get the photos can save that a link is missing and I don't know what.

  Hi Gregory Trinidade,

  You can try to create a folder in the C: drive and copy the images on the desktop folder C: drive.  After copy in C: drive then try again copy on external hard drive and see if it works well or not.

  Make sure that you have access to the C: drive. Also instead of cut photos copy in another location.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Copy and paste problem.

  I bought a new laptop with windows 7. I use a program called Ancestral Quest to store genealogical data. I can't copy/cut and paste anything within QA. Also I can not copy from Word and the like and paste in QA. There is no error message, just noise. I have asked on the AQ list and had several responses that they have been using windows 7 and they had no problem with the copy/paste function. Also, I had no problem to run this software on windows XP. I hope someone can help. Thank you
  I already looked at several problems of copy/paste, but none seems to be like mine.

  Can paste you into Notepad to QA and then copy of Notepad in AQ?  Same question with Word?

  Cut and paste the number of Works for Windows Mail
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/e1405fea-fabe-445F-8354-3bee67394db3

  http://social.answers.Microsoft.com/search/en-us/?query=cut%20and%20Paste%20issue%20from%20Works%20To%20Windows%20Mail&RQ=meta:search.MSForums.forumid (893ae3f8-6e52-4d46-8aee-71be26000c70) & rn = programs + Forum

  How to troubleshoot a program that does not run as expected once it is installed on Windows Vista (or Win7)
  http://support.Microsoft.com/kb/931362/en-us

  Make older programs in this version of Windows
  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• Cut and paste in Indesign style names

  Hello everyone, I'm new to this forum.

  I have a question about the cut and paste in Indesign: Let's say I have two documents.

  -In the first, I have several rules of paragraph style, let's say style1, style2, style3.

  -In the second document, I have exactly the same paragraph style (style1, style2, style3) names, but different formatting rules (for example in doc1 style1 is 13 times, the same style1 doc2 is Minion 11).

  What I want to do is to copy the text of document 1, the selected paragraph style name, but not the setting shaped styles. So when I did the copied text in document 2, can I get the text automatically style with rules of formatting of document 2.

  I can't find a way to do it: I cut & spent keeping the formatting, but not the names of the styles only.

  Did someone in the face of this problem or have a solution?

  Thanks in advance for your help.

  Hi everyone and thanks for your help.

  I finally found out why the cut & paste has not worked for me.

  The problem was that in doc1, I put all my styles in a folder, while in doc2 (take a guess!) No.

  That was the problem. Once I put in a folder with the same name as doc1 doc2 styles, everything worked magically.

  Thank you very much!

  Fabio

• Cut and paste text wrong!

  Adobe and paste text wrong!

  
  

  A simple copy / paste a civic address of a discount PDF

  
  

  When I go to paste the address in Notepad, the street address is COMPLETELY DIFFERENT!

  
  

  I just click on the text there is NO hyperlink.  The address is valid, just another branch.

  How is that possible?

  
  

  
  

  I can't be trusted to cut and paste from Adobe!
  

  PDF files can contain a lot of hidden information. You can't always trust what you see is all that is there...

  About this specific file, my guess is that someone wanted to replace the address so they just put the new text with a white background on the old text and thought which is pretty good. Big mistake. Unless you are using the redaction tool information is still there and is copied when selected, as you can see it coming.

  When I open the file in Acrobat I can clearly see and select the items of old text under the visible text. You must report this problem to the creators of the file and request a better version of it.

• Cut and paste in Photoshop CS6

  No matter what I do, I can't cut and paste in photoshop cs6.

  I'm trying to copy a layer from one tab (project) to the other. I also try dragging, but it won't.

  I worked in CS5 and it has never been a problem. What I am doing wrong?

  Hello.

  You can try to move a layer in the layers panel to the tab of another image. (Photoroy, Yes, having anchored side by side image is called tabbed images)

  Unfortunately, it is not possible from the layers panel, but it is possible to the image itself.

  If you do not have the move selected tool, press the V button, then right-click on the top of the area where your layer is to select, or drag the tab of another image, wait for the image to appear, and then release the mouse button; or use layer duplicated, as suggested above.

• formatting lost when cut and paste

  I've been cutting and pasting text from one part of a file to another.  The text to move consisted of several paragraphs.  When I pasted the text in the location in the file, the formatting of the paragraph is replaced by the paragraph format of the paragraph where it was stuck. In other words, it is sticky as if I use

  Edit > Paste Special > text

  All of the suggestions.
  

  nytomt, thank YOU! I removed the Skype toolbar and the problem disappeared.

  I guess that Skype Toolbar messed with the Clipboard, he "said" Windows whenever items are taken into memory (Clipboard) change their plain ASCI text so it can be used to dial a number (Skype Toolbar allows you to select the phone numbers on web pages, email and so on and compose the using Skype). Thanks again nytomt!

• Cut and paste the text of the anchored text box?

  CS4, Mac G5, Leopard.

  I've recently been investigating scripts in InDesign and I have a problem to solve that exceeds my, base, understand.

  I used Rorohiko "Lightning Brain text exporter" to extract text (rtf) of a book.

  The text contains countless anchor text blocks. I would like to be able to select all the text in the block of text anchored, cut and paste it into the document where the anchor element is referenced, and then remove the anchor text (now empty) block.

  Any help would be accepted with gratitude

  Thanks Steve

  A full javascript (from the previous post on the forum):

  myDocument var = app.activeDocument;

  Inlines (myDocument);

  function inlines (doc) {}
  var doc.stories = St;
  for (var i = doc.stories.length - 1; I > - 1; i--) {}
  While (st [i].textFrames.length > 0) {}
  var ix = st [i] .textFrames [-1].parent.index;
  St [i] .textFrames [-1] .texts [0] .move (LocationOptions.after, st [i] .insertionPoints [ix]);
  St [i] .textFrames [-1] .locked = false;
  St [i] .textFrames [-1]. Remove();
  }
  }
  }