BlackBerry Q10 Q10 cannot turn off after 10.3

Similar Questions

• Cannot turn off after the upgrade to 10.11.4

  I have a late 2012 3.4 ghz i7 iMac / 32 RAM 10.11.4 running (and other iMacs around the office): I can't stop. When I try a stop down (after removal of servers/TimeMachine, close all applications - even unplugging the ethernet cable) - it goes to a black screen with the "circle of rotation of lines." They will be 'spin' this weekend if I let him. Instead, I'll put the machine to sleep during the week and make a hard cock down via the power button Friday night.

  I think it has something to do with the upgrade to 10.11.4. I have reset the PRAM and tried also to start up in the 'hidden' startup disk and first aid running without result. Tried to find preferences for throw - unsuccessfully - Finder found "com.apple.finder.sfl" I should throw?

  Another change is that now I'm using a new Pegasus2 18 to RAID hooked up via "2016" MacMini and Apple server software (replaced my Apple XServe)

  Someone at - there a method I can use to stop? Thanks for your help!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Cannot open PDF files, it turns off after 10 sec.

  Original title: pdf file

  When I open a PDF file it turns off after 10 sec.

  How can I reset it so I can read or print the PDF file.

  Thank you.

  Ron.

  Hello

  1. What is the exact error message or error code?
  2 are you facing this problem with a particular PFD file?
  3 is that the question is limited to PDF files?

  I suggest you uninstall and reinstall PDF program and check if it helps.

  Uninstall a program: http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program: http://windows.microsoft.com/en-US/windows7/Install-a-program

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk

  If you still have the problem then I recommend you to contact the program vendor and check if it helps.

• desktop PC: after certain period of time reduced the brightness of the screen - cannot turn off

  Win 7 64 bit

  AMD hd 6870 connected via HDMI pn59d500 samsung plasma tv

  What is going on:

  If I am reading an article or by typing in a comment like this box, the screen turns off after a certain period of time.

  -mouse mobile, typing, scrolling window or motion/movement of the window (like firefox) on the desktop does not work for normal brightness screen.

  -resizing of the window will be brighten screen (also by clicking on the Start button or start another application or similar activities).

  What I've done and additional info:

  -My hdtv eco settings and and autobrightness are all off. I don't have the problem with other components related to this view. This is not the problem of the screen

  -my desktop pc power settings are not set to reduce brightness at any time. I even disabled the «turn off the display after...» "option. Anyway, same problem. I have the computer put to sleep after 20 minutes.

  -a ran the troubleshooting of windows power - I know how to click and read. There is nothing outside of the obvious and already known.

  As-i crossed all the parameters of the CCC (the suite software amd vid card). the only color/quality setting I use is deinterlacing with drop-down auto-detection. pixel format is set to RGB 4:4:4 limited. I have active treatment of ITC (will try not disabled, no idea what it affects). I use manual detection of displays... no setting under "desktop management", "my digital flat screens", and "video" seems to do anythign with dimming screen.

  I read through the first 5 pages of the "Sun Office" search results here... no related response.

  just thought to google the registry entries related to power... but always options this issue. I'll look into registry changes after.

  Hello

  Please update us on the issue. Office is different from the laptop, and because the screen is dimming as it does in a laptop, it is related to the power settings or the driver itself. These are the only two things that are responsible for the same in a laptop as well.

  Therefore, I recommend you try to create a new power plan or change the existing one to check. You can also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Let us know the results when you try these methods.

  Thank you

• Equiium series A - maintains turns off after 20 minutes

  My laptop turns off after about 20 minutes of use. I checked for dust and clean battery etc. Any other suggestions? It has been suggested that I have to find and fix bugs in C drive but I don't know how - as any help much appreciated.

  Is what model laptop?

  Dust in the heat sink is often the cause.
  It can also be caused by a dry heat pipe (liquid escaped), or dried up CPU thermal grease or a failed fan.

  Or its possible that the power adapter is faulty, or she cannot provide enough amps, or a power adapter non - Toshiba is used.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• Tecra 9100 comes on intermittently and turns off after 10-15 seconds

  Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

  The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

  It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

  Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

  Thank you

  Hey,.

  Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

  But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

• Satellite A60-712 - turn off after 2-3 seconds

  Hello everyone.

  I am trying to fix this Satellite A60-712; He came to me without feeder, but I found a compatible and it seems to work: CC in LED lights up and the battery starts to charge.

  My problem is that this starts Mobile for awhile, radiator begins to turn, all the lights are normally, but, all of a sudden everything turns off after 2-3 seconds. I have observed that this machine has only one slot of free RAM and noted that it has integrated the module memory motherboard; that would be the problem? Or another reason?

  Could someone help me?
  Thank you.

  Hello

  > it came to me without feeder, but I found a compatible
  Can you please test it with a Toshiba original AC/DC adapter? The same thing is happening?

  If the laptop has already integrated memory motherboard there is no problem. Alternatively, you can use the laptop without additional RAM module.

  In the worst cases, you need professional help of an authorized service provider. :(

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Satellite A100-812: screen brightness does not not & screen turns off after a while

  Some power management features do not work after a bios update (5.90).
  The display brightness can be changed in the power manager, or the top menu system. In the power manager, the cursor can be moved, but the brightness is not set. Toshiba menu system appears to hang on trying to change the brightness with F6 - F7 and won't move the cursor.

  In addition, the screen does not turn off after the set amount of minutes in the power manager.

  What is going on? How can this be repaired?
  Thanks in advance.

  Hello

  Some questions; Why you have updated the BIOS?
  Are you sure you used the right BIOS?

  In my opinion you shouldn't t to update anything if the laptop works properly!

  However, try to access the BIOS, set the default settings and save the settings before exiting the BIOS.
  If this does not help, I would pick up the laptop with the Toshiba Recovery CD.

  Good bye

• Satellite A30 turns off after a few minutes (set temp)

  Anyone know if there is a temp for the A30 laptop parameter. My laptop turns off after a few minutes or alternative suggestions

  Thank you

  Hi Waseem,

  Dust accumulation is not in the fans themselves, but in the space between the fans and the CPU radiator, where it is trapped by the matrix of cooling.

  The technique of using a hose of vacuum cleaner against the fan grids is designed to suck the dust outside in front of the fans without having to dismantle the radiator.

  Obviously, you have just as much suction as possible in order to remove any dust, it is therefore important to isolate grids of aspiration air with a cloth.

  Kind regards

• iPhone 6s turns off after start upward with 30% of remaining battery

  6 s iPhone will turn off after starting with30% battery left please help

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Re: Auto Turn Off after inactivity

  Hello

  Toshiba Satellite Pro L500

  Where can I change the settings to know how well before the computer turns off after a period of inactivity?

  Thank you

  Choose change settings in "Power Options." You can see several option there.

• Wireless WAN T410 turns off after round approve 3 minutes

  Hi all

  I have a T410 with windows 7 32-bit company. The normal Wi - Fi connection and connection blue tooth are stable and works well. However it seems that Wireless WAN radio turns off after 5 minutes without worrying if I'm logged in or not. I have installed the dial-up connection program and reconstructed profiles with no luck. I also change the power management setting both in the Device Manager in Control Panel.

  What else I can try.

  Note This is for the mobile card radio.

  Concerning

  J

  Hello guys,.

• Y450 screen turns off after 5 minutes, set to never power settings

  The display on my Y450 turns off after 5 minutes if it is connected or not. I changed the power settings on all levels of the power to never turn off the display, but he keeps doing. I thought that maybe it had something to do with windows is not fully updated so I did it earlier today, but it has not changed. It doesn't matter whether the system is energy saving, balanced or a custom.

  I don't know what to do to stop it, but it's annoying when I play videos and turn the screen on every 5 minutes. Is there another program I'm missing that somehow overrides the power settings?

  You may also need to change the power settings for the windows power management and lenovo power management.

  We also know, that the problem persists only watch movies?