BlackBerry Q5 need help to configure my phone

Similar Questions

• BlackBerry Q10 need help with putting in place an E-Mail on my BlackBerry Q - 10

  This is my first cell phone 'no basis', so I'm fighting in the implementation (there are some things that just are not covered at all in online user manual). The Q-10 apparently BlackBerry not the screen full of 'dial' e-mail unless your e-mail account is configured. The e-mail account, I have, what I have on my desktop computer; and because I'm so, so many emails without importance on it every day, I won't be getting all these emails on my cell phone (but I "don't" want to access on my cell for ALL options and electronic screens). Is there a way I can use my existing desktop computer e-mail address to set up the e-mail account on my Q-10 of BlackBerry, but somehow turn at 'incoming' e-mail on mobile phone off completely (so I only get emails on my computer)? In addition, which means when he asks if I want to "synchronize" my emails? Any help would be greatly appreciated!

  Remember, look up if you don't know and ask if you need help.

  See https://support.tigertech.net/outlook-express-lmos and ignore references Tiger Technologies. Set the time to keep on what you think appropriate. You can always change more or less to find the optimal length.

  Please publish. I can tell you that I am not alone in wanting to allows you to get the most out of your BlackBerry.

• BlackBerry Smartphones need help to unlock my BlackBerry 9810

  I have a BlackBerry Torch 9810 of AT & T. The phone keeps asking me the PUK code. Please help me find the PUK code for my torch 9810. I can't access anything, not even the menu for my BlackBerry 9810!

  Need help to remove the PUK code!

  I am totally fed up with AT & T as they rob me of my money. I need network unlock my phone contract AT & T I need code unlock and the PUK code. If I don't get the unlockcodes I'll have to throw my BlackBerry Torch 9810 for nothing!

  When the error message "ENTER PUK CODE" appears on the screen of the device:

  1. Connect to myAT & T.
  2. Select Wireless in the myAT & T tab at the top of the page.
  3. Select my phone/device.

  

  4. click on unlock the SIM card.

  

  5 follow the instructions on the page pop up.

  

  Unlock the SIM card

  1. Enter the eight-digit on the phone PUK code, then press OK/Yes.

  Note: Some users of Motorola phones must enter * 05 * if "enter PUK code" is not already displayed. After entering * 05 *, enter the eight digit PUK code and press OK.

  2. Select a new PIN code, then press OK/Yes.

  3 re - enter the PIN code, then press OK/Yes.

  4. If the codes have been entered correctly, the phone is ready for use.

  Now get rid of AT & T...

  It is also possible by using an unlock code. For BlackBerry is the unlock code is also known as the MEP2 code. First you try to call the AT & T customer service. Give them the IMEI number of your BlackBerry Torch 9810. They will provide you the unlock code (MEP2) for your BlackBerry Torch 9810. But this does not always work.

  Most of the carriers will give you the unlock code for your BB. Some have policies that vary from having an active account in good standing (good payment history) to have been a customer for 90 days or more. You can buy the unlock code from various suppliers. Unlock codes are unique to each BlackBerry. They cannot be used with a BB to another. Do not purchase your unlock code from a friend who has an and said that the code was for his BB. Unlock codes can last from 4 hours to 10 days to get it. A few BlackBerrys simply cannot be unlocked for various reasons: the IMEI number is not found in the RIM base, or the aircraft was a pre-release, not-to-be-sold device.

  The best way to unlock your Blackberry device is buy release from a trusted provider. Search the internet for unlocking mobile phone Web sites. You will encounter a thousand websites that can do this. Choose which ever you like. Do not price comparisons and unlocking instructions. Check again the number of model-network to which your phone is locked and the IMEI number before ordering. If you have made mistakes in these details these people will never give you refund! One last thing, before ordering ask them about the conditions for a full refund in the case of an error code! Think and make a wise decision. I personally bought the code for my Blackberry 8900 curve unlock genie.com. This is because they have good reviews on most of the cell phone forums.

• HP C4580 not scan to PC. I need help to configure my Netgear router please :)

  Hello

  I've read here, the threads that talk about this printer prints only not to or from a PC - my problem is that the C4580 go scan from my PC, but will not scan to PC.

  I found an answer from someone who has had the same problem earlier this year, but I do not understand what to do.

  Here's the answer:

  "I have ordered mine entering the settings from my router (Netgear) page and setting the built-in firewall rules. "The internal firewall was blocking the printer, I could print, scan using the computer, just could not scan from the printer to the computer.

  Also, I have a Netgear router, but could do with help on how to do the same thing as the person above.

  Thanks in advance for any help!

  Sorry, I don't need help after all

  It was not the router requires a configuration, it is the firewall that was a block that should be changed to "allow".

  My "all-in-one" now does everything it is supposed to do

• I need help for configuring security for my wireless again.

  Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.

  original title: Wi - Fi Protected Access

  Hi dmcangus,

  See the Microsoft articles below for more information on WPA wireless security.

  Configure Security Wireless WPA for home networks

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security

  Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP

  http://support.Microsoft.com/kb/815485

• BlackBerry Q5 needing help, Q5 plays up

  I don't know what I did to my Q5

  but every time I hit something that will be a woman's voice saying 'touch message text' or 'world blackberry button' etc. of things like that and he isn't going anywhere, I don't know how to use it.

  about the screen is UN-clickable.

  need help, I tried to understand try it for 15 minutes, I can't do it, it makes me nutss

  Thank you.

  Is your screen reader enabled.

  Touch the button to power on three times quickly to turn it off.

  You should hear "screen reader turned off.

  Then, go to settings > accessibility > screen reader and disable competely.

• Protect the blackBerry Q10 need help to fix my blackberry!

  Sorry but this is my first time that I have post in our forum so if I have nothing worng i ' m so sorry! "

  And my problem: i got a BBID and I change my device several times (peripheral exchange for a friend when they want) but now when I connect to my BBID on new device (10 BB) I can't active my blackberry Protect? Hungarian noise me with a Messenger that I have a lot of device in my BBID/BBprotect so I have led one or some device, but when I connect to blackberry protect. I led the last of them, but that messenger always noise me. So I need help to fix my BBID, because now in my bb protect I don't have any device, but I still have new journal to my BB cant protect. Hope someone can fix it or tell me how I can solve this problem by myself.

  Thanks for reading!

  My BBID is skeleton1775

  MOD Edit: Edited post to comply with the Community guidelines and the terms and Conditions of use

  Many users have solved the problem by removing the device to Protect and add it again. Looks like you've done that. I don't really know what else to do. You could try a security wipe.

• BlackBerry Smartphones need HELP on upgrading to os 4.5!

  Ok.. This is my second time trying to updrage my blackberry... my problem is that I intalled just my Office Manger 4.3, so I upgraded to 4.6... After this is done, I deleted the vender.xml... once I connected my blackberry on my computer and a pop up came... it was like reading, though she had no update or something. I told myself WELL, but I have it just disappeared and I was like NO! .. .i did all the steps correctly right...?

  need help!... problems it is a desktop software 4.7 now must I have downloaded which?

  I do not understand the difference on the softeware handheld and the desktop software... and when I go to the device sooftware I see it says upgrade to 4.5, I click it and download it but nothing happens...

  NEED HELP FROM MAJOR IM A NOOB ONE THESE THINGS LOL

  ANSWER AS SOON AS POSSIBLE

  you have the Desktop Manager, which includes many things including:

  • a tool for synchronization of calendar, contacts, tasks
  • a backup tool
  • installation of application tool (to install applications on your device from the PC)
  • installation of an OS tool (for example, upgrade the operating system on your device)

  Desktop Manager available in many versions: 4.3, 4.5, 4.6 and 4.7. Since you use a curve, no matter what version is right for you. The last is supposed to have fewer bugs.

  On the operating system : this is something else. There are many OS versions for the curve: 4.2 4.2.1 4.3 4.5. Function of your trailer, you can have access to some. You can install the operating system to another carrier if you want, it takes just to delete the vendor.xml file.

  Install an operating system : one way to do it is:

  1. Download the setup of the operating system on your PC
  2. install the OS on your PC. It will bring the BONE inside the Desktop Manager
  3. the Desktop Manager allows to download the operating system in the desktop to the Device Manager.

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• BlackBerry Smartphones need help on my record of e-mail on my curve 8520

  Need help

  How to use the same folder email on my blackberry?

  When I change my mobile network and register again my bb email and Setup again with my old email, my bb will make a new folder to store my email.

  How can I change my setting of bb always using my old e-mail folder?

  Thank you

  Yep, moble different suppliers, different accounts BIS BlackBerry Internet Service.

  I don't understand the problem. Look at your main message folder. Press the Menu key > settings for the Inbox, can you choose here what email accounts go to the main folder of Messages?

• Debugging - need help with configuration

  I also posted this in advanced by accident...

  I need help to my local development for CFBuilder debugging machine configuration. Developing CF applications is configured correctly, but I have problems configuring settings for debugging for CFBuilder/Eclipse. CFBuilder is installed and connected to RDS, and CF administrator is configured to debug level line. I'm running Windows 7 x 64 with ColdFusion 9 (using IIS).

  All my projects are in my "C:\Dev" folder, and each project contains a folder "www", which is the root of the web project. So, I have my projects organized like this:

  C:\Dev

  TestSite

  design

  docs

  www <-web root folder

  , I have created a ColdFusion project and he mapped directly to the folder root 'www '. In IIS, the web root folder is mapped via a virtual directory under the web site default and is accessible from "http://127.0.0.1/testsite"" "

  I have configured my RDS server that works correctly, so I can see the databases on the server. Nice. I also set up a server in the list of servers in the perspective of coldfusion and imported directly from my RDS server settings. It has the same name as my RDS Server, which is 'Server RDS Local.' I also added a URL prefix for "testsite" which is mapped to the local path: (C:\Dev\TestSite\www) and "http://127.0.0.1 \testsite. And finally, in Debug maps (preferences window), I said 'Server RDS Local.'

  Everything seems to be installed, but I can not debug. Here's what happens:

  Of the ColdFusion perspective, I click with the right button on index.cfm and select "Debug-> ColdFusion Application" the first time I do it, it switches on the ColdFusion debugging Perspective and loads of " " http://Homepage/ 'and then nothing seems to work. On the debugging tab, it shows me that he has created a new launch for my project as follows:

  TestSite

  Local RDS Server

  Model of ColdFusion

  I see my breakpoint in my breakpoints tab. But I can't seem to get any further. I can't find a way to run at my breakpoint. The home page for the current debugging session is "http://homepage/" which is something I don't understand. How CFBuilder go to the correct home page for the debug session? Maybe that's the key of.

  Hello

  Please right click on the project, and you will see an option "set the URL prefix. Allows to set the URL of your project.

  Thank you!

  Bhakti

• BlackBerry 10 need help: Configuration of Outlook Web Access 2010 in Z10

  Hello.

  Summer tinkering with my Z10 on how I can configure my email to work (by using OWA 2010) but my efforts were in vain.  The settings I used were the same settings I used in my Bold 9780 who works so I'm at a lost, why it can't work on my Z10.

  All the suggestions/advice/help will be welcomed with open arms

  Thanks in advance.

  See you soon!

  Mike

  Hello

  Please see this KB:

  • KB03133 How to integrate an email address to Microsoft Outlook Web Access on BlackBerry smartphone

  Especially the last comment at the bottom... it's probably the cause of your situation.

  Good luck!

• BlackBerry smartphones need help w / answering calls flip phone

  I would like to disable the functionality of answering a call by opening the flip phone. The question that I have is the info they have to which I'll share below does not work for me, in the sense that... directions tell me to go to menu, then options which is fine - but the next step to go to the General options is my problem - I have no general options. I click on menu, then options, there is no general option for me to choose and I still have to find the place where auto answer calls. Can someone help me please?

  Hi and welcome to the forums!

  You might have missed the correct starting location, you're not crazy!

  Turn off the green button, menu button, options, General options, auto answer calls.

  Thank you

  Bifocals

• BlackBerry Smartphones need help with an icon that is appeared after my phone rebooted

  My Blackberry Bold 9650 restarted when I clicked on the option of the camera.  After that it was really slow.  I noticed a new icon on the top of the main screen.  Never seen before.

  There is 1 with a circle next to it.  Inside the circle is an arrow pointing to the Southwest.  In the northeast corner of the cirlce is red dot something.  I have no idea what it is, but since it appeared after the reboot, I want to make sure I know what it is.

  I would appreciate an answer on what means the icon.  It is not true slow more (so far), but I'm still curious about the icon.

  Hi and welcome to the Forums!

  This icon is an indicator of the AppWorld himself or one of your apps has an update available. Launch the AppWorld and archive MyWorld.

  Good luck!

• BlackBerry smartphones need help on my email account but is not a service of BB.

  How can I access my email I have no bb service. I have wifi link already in the phone. How can I replace the bb? I used red pocket mobile service. Any help is appreciated. Oh btw, they give me this heap configuration that I cannot configure LOL and don't know what even the instruction button too for a girl not like me hight tech . Help, please!

  As correctly mentioned knottyrope, you need a BlackBerry (or BIS of BlackBerry Internet Service) data plan fully to access your email accounts.

  BIS will push notifications by e-mail on your phone if you don't have to go look for new ones.  He is also responsible to push for new posts to facebook, new tweets, etc., on your phone.  Without this, you must consult your e-mail on the web account to access, you will need to go to facebook.com to see new messages, you will need to go to twitter.com for new tweets, etc..

  I hope that explains it for you.