BlackBerry signing authority tool

Similar Questions

• Signing authority tool: Configure the SMTP username password

  Hello

  I try to configure the signing authority tool.

  I entered in remote Client Administration, CSI file by e-mail to: my email address.

  

  However, when I run, there is an error:

  

  So, I have to configure SMTP username & password in some places. But I tried to find, but I can't.

  No idea on how to configure the SMTP username & password?

  Thank you in advance.

  The administration of BlackBerry signature tool does not support SMTP authentication.  If it's something you need I recommend logging a feature request in the incident handler: https://www.blackberry.com/jira/secure/Dashboard.jspa

• Bar is not signed RDK bar isn't signed AUTHOR this bar contains unsigned entries that did not check integrity.

  I created an application with qt creator, it works very well on my z10. But when I download the bar file to blackberry, I got this message

  "Bar is not signed RDK bar isn't signed AUTHOR this bar contains unsigned entries that did not check integrity.". "

  I am registered already BlackBerry signing authority and I also have a debug_token.

  The qt project has to a file of bar - descriptor.xml, information of the author are the debugging token.

  Can someone tell me how I can solve this problem?

  Problem solved.

  use the following two command lines

  BlackBerry XXXXX.bar bar-descriptor-XXXXXX-qtc-nativepackager-package - generated.xml

  BlackBerry-sign - storepass yourstorepass XXXXXX.bar

• Signing authority of blackBerry on 64-bit Windows 7?

  I am migrating from a computer in Windows Vista 32-bit to a more recent machine of Windows7 64 bit. I can't get the BlackBerry signing service to start on the new machine. When it works on my old computer behaves like this:

  1. In "services", I right click on signing authority and select Properties. In the log on tab page, I confirm that "Allow service to interact with desktop" is checked.
  2. In 'services', I then right-click on signing authority and select start. A progressbar is displayed.
  3. In the Windows task bar, a new task starts flashing
  4. I click on the new task and Windows switch to some sort of compatibility mode where can I enter name of user and password. Then I'll be back on the normal desktop and the service is started.

  On my new machine I can't get past (2), the just start operation times out.

  Is 64 bit of Windows 7 supported?

  How the BlackBerry (websigner.exe) signing authority to start on Windows 7 64 bit?

  Thanks for your help.

  Apparently the "Interactive services Detection" service is not auto-start on 64-bit Windows in the way it was on 32-bit Windows. Once this service is started, signing authority can be started.

• The bar is not signed AUTHOR

  Hello

  I'm manually signing my 10.1 SDK bar file built using the following which returns "Bar signed" by pressing.

  'C:\bbndk\host_10_2_0_15\win32\x86\usr\bin\blackberry-signer' bbidtoken - Mybbidtoken.csk - storepass $MYPASS$ MyApp - 1_0_0_5.bar RDK

  However when I try and publish it for Blackberry world, I get the following error on upload.

  "Bar is not signed AUTHOR."

  Thank you

  Hi Mark,

  Sorry, that was my mistake, I forgot to remove the option RDK the second bat file that I had created for provider 'B' now that I have it removed I am not getting any error...

  Thanks a lot for your great, dedicated and great support...

• BlackBerry-sign gives me "error in opening zip file".

  We have BB 10 Native application that has some setting we want to customize for each customer. Example of database server, etc. User\Pass. The settings are stored in the QML file so it can be read by the App while running.

  In order to allow customization based on demand, we decided to create the ussigned of the bar of the package version using blackberry-nativepackager.  Bar file is Zip file, when these details provided by the customer, we simply decompress .bar file, the zip again and QML file using a utility such as 7 Zip.

  But after that when I tried to sign the new file .bar using blackberry - sign it gives me "error in opening zip file". File has permission and it is not corrupt. I don't know why blackberry-signatory dislikes the new bar file. Is native Packer doesn't something extra then creation of zip file to make it work with blackberry signer?

  I believe that this solution I was looking for.

  Tool blackBerry Push initiator:

  The initiator of Push BlackBerry tool is an application that allows you to initiate the data push to installed applications onBlackBerry 10 devices.

  http://help.BlackBerry.com/en/BlackBerry-Resource-Kit-for-bes12/12.1/Administration-content/ake13993...

• signature. What is 'Initialize communication with RIM® signing authority.

  Hi, as the title suggests, what is 'Initialize communication with RIM® signing authority?

  It is the number from step 2 by signing the app. These steps has no explanation of how to take the step, he said only: "Initialize communication with RIM® signing authority.

  Sorry to be so n00bish please help me!

  Hey,.

  Since you did not even registration to the registry, you can do this through Flash Builder. Save the .csj file, you have received by e-mail somewhere, and then follow the steps detailed here:

  http://docs.BlackBerry.com/en/developers/deliverables/23959/Configure_app_signing_FB401_1473166_11.j...

  After you do the stuff cert developer, you can probably ignore the part on the proxy stuff and continue to the next part.

  I read somewhere on the forum that is signed apps get reviewed more quickly in writing MShom (from what I remember). We still do not know wat the deal with the approval time is but signature cant hurt our chances right? haha

• Cannot install the signed file BAR, [if the argument "blackberry - sign - sigfile ' is not GPACACF]

  Hi all

  I have following queries on the use of certificates in BAR files.  Certificates are defined by the user.  [ie. certificates created locally using this link 'http://developer.blackberry.com/native/documentation/core/com.qnx.doc.nfc/topic/manual/t_nfcdevguide...

  Queries are

  1. the '-sigfile "command argument"blackberry-signer", if I have any other purpose than"GPACACF", I get the error message following ' result::failure 880/var/tmp/cgic851170: cannot access the Member ' META-INF/FILEACF.» EC'

   

     2 can I sign several certificates [one after the other] using the command "blackberry-signatory"?

  Forward to your response

  OK, I tested the procedure in the documentation and created a file of key PKCS #12 and gave my key an aliass MYALIAS. See the details here:

  $ openssl pkcs12 -in selfsign.p12 -info
  Enter Import Password:
  MAC Iteration 2048
  MAC verified OK
  PKCS7 Encrypted data: pbeWithSHA1And40BitRC2-CBC, Iteration 2048
  Certificate bag
  Bag Attributes
      friendlyName: MYALIAS
      localKeyID: D8 CB 15 E1 B3 30 0C 90 C0 57 EB FA A1 D4 20 BB 1C EF A7 40
  subject=/C=GB/ST=Berkshire/L=Slough/O=BlackBerry/OU=DevReel/CN=Test/[email protected]
  issuer=/C=GB/ST=Berkshire/L=Slough/O=BlackBerry/OU=DevReel/CN=Test/[email protected]
  -----BEGIN CERTIFICATE-----
  MIICgTCCAeoCCQDgvIXlO1lIYDANBgkqhkiG9w0BAQUFADCBhDELMAkGA1UEBhMC
  R0IxEjAQBgNVBAgMCUJlcmtzaGlyZTEPMA0GA1UEBwwGU2xvdWdoMRMwEQYDVQQK
  DApCbGFja0JlcnJ5MRAwDgYDVQQLDAdEZXZSZWVsMQ0wCwYDVQQDDARUZXN0MRow
  GAYJKoZIhvcNAQkBFgtmb29AYmFyLmNvbTAeFw0xMzA4MTYxMTQ0MjFaFw0xNDA4
  MTYxMTQ0MjFaMIGEMQswCQYDVQQGEwJHQjESMBAGA1UECAwJQmVya3NoaXJlMQ8w
  DQYDVQQHDAZTbG91Z2gxEzARBgNVBAoMCkJsYWNrQmVycnkxEDAOBgNVBAsMB0Rl
  dlJlZWwxDTALBgNVBAMMBFRlc3QxGjAYBgkqhkiG9w0BCQEWC2Zvb0BiYXIuY29t
  MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDskC5uCv6eGgZvrXpWJsXz11HK
  POCraWH7QfWEaa/d82SusTVVL2UEqcWhRKHGD3ogikyQ+p4MiCKViYKXG2067nfv
  C+yNUupinb7Bsx/YsUp5zv135fpMXn9rSD/P5LegQONxVqeW5ZoSc3br4JAmYoFq
  uwnNQJl+0AeD7HUjUQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAKSKibcQgvho0kPU
  E53TWjiVTOxxMzpu2F3/y1McEeOwg0bvTvfoGm3fFJnVM/B1509QgEVenSuO4Am8
  CrF9MCdRA8HJeAw2P7YHSwRgc9nn1HqkqF1McRi+DVCwIfWUFCyD9Wllb5PWPlkD
  voqNLCtuuYRyoIGq+gANBXLOlg1m
  -----END CERTIFICATE-----
  PKCS7 Data
  Shrouded Keybag: pbeWithSHA1And3-KeyTripleDES-CBC, Iteration 2048
  Bag Attributes
      friendlyName: MYALIAS
      localKeyID: D8 CB 15 E1 B3 30 0C 90 C0 57 EB FA A1 D4 20 BB 1C EF A7 40
  Key Attributes: 
  

  I then used blackberry - sign to sign a file bar:

  >> blackberry-signer -keystore selfsign.p12 -sigfile GPACACF -sigalg SHA512withRSA -storepass barfoo -verbose NfcChicken-1_0_0_20.bar MYALIAS
  SF Digest =
  4e 0e 9c 25 a5 2e 0a 1a b9 c0 d2 f8 7c 9e 05 e1
  65 39 eb 92 4e 1d db d8 9d 11 f5 8f 84 b0 92 75
  48 3e 53 40 b6 e3 b9 cc bd 6e 7e 61 95 7b ba d5
  6e b1 76 be b6 c5 d9 a7 ac f3 ad c0 1f fd e7 8a
   Updating: META-INF/MANIFEST.MF
     Adding: META-INF/GPACACF.SF
     Adding: META-INF/GPACACF.RSA
    Signing: native/bar-descriptor.xml
    Signing: native/icon.png
    Signing: native/assets/images/brown_egg.png
    Signing: native/assets/images/Thumbs.db
    Signing: native/assets/main.qml
    Signing: native/assets/sounds/chicken1.wav
    Signing: native/qm/NfcChicken.qm
    Signing: native/NfcChicken.so
    Signing: native/assets/.assets.index
  Info: Bar signed.
  

  If you look at the signed file bar, you can see the GPACACF. SF and. RSA files in the manifesto bar.

  

  If I use the following command

  >>blackberry-signer -keystore selfsign.p12 -sigfile XYZ -sigalg SHA512withRSA
  -storepass barfoo -verbose NfcChicken-1_0_0_20.bar MYALIAS
  SF Digest =
  4e 0e 9c 25 a5 2e 0a 1a b9 c0 d2 f8 7c 9e 05 e1
  65 39 eb 92 4e 1d db d8 9d 11 f5 8f 84 b0 92 75
  48 3e 53 40 b6 e3 b9 cc bd 6e 7e 61 95 7b ba d5
  6e b1 76 be b6 c5 d9 a7 ac f3 ad c0 1f fd e7 8a
   Updating: META-INF/MANIFEST.MF
     Adding: META-INF/XYZ.SF
     Adding: META-INF/XYZ.RSA
    Signing: native/bar-descriptor.xml
    Signing: native/icon.png
    Signing: native/assets/images/brown_egg.png
    Signing: native/assets/images/Thumbs.db
    Signing: native/assets/main.qml
    Signing: native/assets/sounds/chicken1.wav
    Signing: native/qm/NfcChicken.qm
    Signing: native/NfcChicken.so
    Signing: native/assets/.assets.index
  Info: Bar signed.
  

  using a sigfile - XYZ to sign the file bar and the bar file contains:

  

  showing the XYZ. SF and. RSA files added to the clear bar.

  I don't see the error that you notice.

  The documentation notes that this form of blackberry-signer syntax is available only on recent versions of th emost of this command. I ran these commands on the current beta version 10.2 public but it should work with 10.1.

  What version of the SDK yuou use?

• BlackBerry signing key IO exception when you save the new key to the file

  I have blackberry signing key IO exception when you save the new key file when trying to get my keys. I read the other post - I do not use Windows Vista and JDE component package is installed on my machine. What now?

  It was a windows 7 resolved permission problem

• Access to the DPS 2015: new browse Page Authoring Tool

  Hello... we in the United Kingdom seeking to embark on the

  New navigation Page Authoring Tool.

  Any news on when this will drop here? No button "Layout Template" or features are still available...

  See you soon.

  Everything is going live today, but it is still too early to Seattle http://status.adobedps.com/ will be updated once the release is powered.

  Neil

• Add object attributes to a DisplayObject that is created in the authoring tool

  Hello, how can I add attributes to a display object, I created in the authoring tool, so that I can access by:

  myDisplayObjectInstance.myNewAttribute

  Is a DisplayObejct a dynamic class, which can be extended to anywhere?

  Thank you very much

  If you convert a MovieClip, it is dynamic... For example, if you draw a shape, select, press F8 and convert it into a MovieClip. Then give it an instance name of test...

  You can then do: test.someVar = someValue;

• Signature without using Code code signing authority of signatory to basic password file

  I'm trying to restrict access to a store of PersistentObject using code signing. I created the public/private key pair and I also have my. KEY file. When I do following step it work very well:

  • Sign your application using your code signing key standard issued by Research In Motion.
  • Sign that these signed .cod files with the application file signatory in the administration of BlackBerry signature tool.

  But I want to design a signature tool automated using ant tasks.  I am unable to find corresponding Ant task to call the file signing tool.

  Anyone know how to get the code signing to work without using the JDE?

  Thanks in advance

  you need a server to use this signature signature. AFAIK, you sign your apps as before, just with your own signature added server.

• Design & layout for BlackBerry 10 Apps Tools?

  I started to develop applications BlackBerry 10 and I wonder what tools like to use to create mockups/prototypes of their BlackBerry applications?

  Thank you

  Henri

  Try http://www.blackberry10templates.com

• Model for blackberry app development tools

  Hello guys,.

  I'm looking for tools to model for OS10 app. I've already found wire (http://supportforums.blackberry.com/t5/BlackBerry-Themes-Animated/Design-amp-Mockup-Tools-for-BlackB...  ), but the link does not work. Can I use for the tools of the comp! Please recommend you use.

  Thank you.

  Luca Filigheddu (Manager, global developer ecosystem to BlackBerry) told me he is allowed to use these media images, and we can change our needs.

  http://CA.BlackBerry.com/company/Newsroom/Media-Gallery.html

  Use MockIt app if you want to do on your device, otherwise I use Gimp a paint.net under Windows.

• Available for Blackberry vulnerability testing tools

  There are tools and techniques available for testing blackberry applications to assess their performance and problems of vulnerability?

  Julie wrote:

  not serious...

  and is there any source code analysis tools?

  CodePro analytiX 7.0 is available for eclipse developers tool?

  RIM does not any source code analysis tools.  However, you can use a third-party tool of your choice.