signature. What is 'Initialize communication with RIM® signing authority.

Similar Questions

• If register with RIM signing do not work correctly in QNX Momentics IDE®

  Hello

  I reveiced files of the SJC. ® For QNX Momentics IDE, I open the preferences-> BlackBerry Tablet OS-> signature - > save.

  I complete the form with the SJC, pine files and passwords. When I submit the form, everything is ok and I receive an email to confirm that I am registered.

  But the problem is when I restart QNX Momentics IDE®, BlackBerry Tablet OS->-> RIM signing authority signature it says "saved: No.

  If I try to record again, QNX Momentics IDE® say that I'me is already registered, and I need to contact RIM to add another user (I don't want to add another user).

  Someone had the same problem? How to fix this?

  Best regards

  System Specs:

  Windows 7 32 bit under parallels on Mac OS x 10.6.8 6.0.12090

  ® For QNX Momentics IDE for BlackBerry® native SDK for Tablet OS Version: 1.0.0 Build id: 201110112127

  There is a bug in NDK 1.0 with localized Windows versions and the signature. This bug has been fixed in NDK 2.0, which should be published very soon. You can also use the beta version 3 If you can't wait for the release of the NDK 2.0 GA.

  Unfortunately, you will need to ask new SJC files and resave.

• Start testapp error "Module: TestApp-1" must be signed with the Runtime RIM signing key code

  Hi all

  Help me please

  I signed my code files with the signign provided blackberry (RRT, CPR, RBB) keys. When I download my application via OTA in my camera, and when I run my application it shows an error like "start Testapp error: ' Module: TestApp-1" must be signed with the Runtime RIM signing key code ".so I signed my application code files, when I opened TestApp-1 to sign it indicates"no signature required"."

  Please anyone suggest me.

  Thank you

  Ashutosh

  I think that JDE currupted. When I compile it with different JDE, he executed well.

  Thank you all to share your experiencewith me.

• What happened to the tab with the sign + to create an empty tab?

  I recently upgraded to v3.6 through several versions of Firefox v8.01. There was once a small tab with a sign more at the end of the tab bar that allowed me to create a new empty tab. It seems to have disappeared somewhere beyond v4.0

  What happened and how I get it back? Yes I know I can activate the button of toolbar for a new tab, but have it at the end of the tab bar is more natural to use.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  See also:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Satellite A500-1GH empty what is PCI accommodation with sign JGPS

  Almost a year ago, I bought a Toshiba Satellite A500-1GH.
  I can't say that I'm not satisfied with the computer or the company.

  The problems I had was the display problem (stops working for seconds) which was the problem of software (updated nVidia 8.16.11.8875) and with the HARD disk that works to stop but the company changed with a new one.

  Now, I wanted to spend the second module of memory from 2 GB to 4 GB so I can have 2 x 4 GB, but when I open the memory compartment, I saw an empty PCI home with JGPS sign beside them.
  Does anyone know what it is?

  And if so what is the part number?
  Thank you in advance.

  Hi mate

  AFAIK JGPS is a GPS connector.
  Perhaps this connector would be shared by 3G miniPCI card.
  AFAIK this Satellite A500-1GH not equipped with a 3G module and slot miniPCI is so empty.

  > And if so what is the part number?
  I don't know the part number, but all parts can be ordered from local Toshiba ASP.

• Anyone of you happen to know what is the difference with a certificate in certificate authorities roots of trust?

  Hi all

  I am trying to solve the mystery of the ICP and have a question about the certificate stores, it would be very cool to have answered. Anyone of you happen to know what is the difference with a trusted certificate root, Enterprise Trust, intermediate Certification authorities CAs, publishers, to the third-party root CA, Active Directory object and so on?

  And does it matter where the physical store? Is there a difference if you use the registry, Local computer, group policy, AIA and so on?

  I noticed that you use the CA store root of trust to validate the server self-signed https, but apparently not so simple with tokens, access control with the EAP protocol network and so on.

  Best regards
  Alex

  Hi Alexander,.

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have a question about the certificate stores on your Windows 7 computer. I will certainly help you to the query.

  I suggest you refer to the of the items listed below and check if this is useful:

  Operating a Windows PKI: Certification Authority certificate life cycle and renewals

  https://blogs.technet.Microsoft.com/xdot509/2013/05/27/operating-a-Windows-PKI-certification-authority-certificate-lifecycle-and-renewals/

  ICP-the key usage attribute

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/ms679125%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  If the link above is not enough, then please visit the link below to post your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Urgent: Error Communication with the agent of the EAC

  Hi all
  
  I am facing the slot problem when I ran the update from the base. Can someone help me what is causing this problem? and what to do to fix this?
  
  [10.16.12 12:18:08] NEWS: Audit AppConfig.xml definition against the provisioning of existing CEC.
  [10.16.12 12:18:10] INFO: Definition has not changed.
  [10.16.12 12:18:10] INFO: Starting database update Script.
  [10.16.12 12:18:11] INFO: Lock acquired "update_lock."
  [10.16.12 12:18:11] INFO: Download from Web Studio config files.
  [10.16.12 12:18:11] INFO: The utility [ITLHost] start shell "cleanDir_config".
  [10.16.12 12:18:11] SEVERE: Error communicating with the agent of the EAC while starting the utility 'cleanDir_config '.
  Occurred during execution of the valid BeanShell script 10 line:
  [[
  
  7. If (Forge.isDataReady ()) {}
  8. If (ConfigManager.isWebStudioEnabled ()) {}
  9. Get Web Studio config, merge with Studio of Dev config
  10. ConfigManager.downloadWsConfig ();
  11. ConfigManager.fetchMergedConfig ();
  12. } else {}
  13. ConfigManager.fetchDsConfig ();
  
  ]]
  
  [10.16.12 12:18:11] BASS: Caught an exception during method call "run" on the object 'BaselineUpdate '. Release locks.
  
  Caused by java.lang.reflect.InvocationTargetException
  sun.reflect.NativeMethodAccessorImpl invoke0 - null
  Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
  com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - valid BeanShell script runtime error.
  Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
  com.endeca.soleng.eac.toolkit.utility.Utility start - communication error with the agent of the EAC starting the utility 'cleanDir_config '.
  Caused by com.endeca.eac.client.EACFault
  sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
  
  [10.16.12 12:18:11] INFO: Lock released "update_lock".

  No idea how to fix this properly. If the server does not get used for something else that your own development, then you can simply delete the configuration of short: stop the EAC (short HTTP Service), rename the directory %ENDECA_CONF%\state to the backup State, create an empty directory, then restart the service. You need to run initialize_services to re - initialize your request. If it's a server 'appropriate', i.e. has other applications running on that you may not want to not re - initialize, support ring - they will have hopefully a better suggestion.

  Michael

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• Checking the status of communication with NI DAQmx or NI6143

  Hello world
   
  I'm working on checking the status of communication with NI DAQmx or NI6143 in Microsoft Visual Studio 6.0 C++ on Windows XP. The communication situation is checked between the DLL and the NOR-DAQmx/NI6143. I wonder what is the command for the control of communication for NI DAQmx or NI6143, and if there is no code available. Any suggestion or advice is greatly appreciated.

  Thanks in advance.

  There are many examples available on your computer that install with NI DAQmx. For examples in C/C++, follow the steps listed in this white paper:

  http://www.NI.com/white-paper/6999/en

  If you are new to data acquisition, that I suggest using LabVIEW. LabVIEW has several examples to begin to use a data acquisition equipment. To find them, open LabVIEW and select help > find examples... > Input and Output material > DAQmx.

  As a note of clarification, NI DAQmx is the driver used to communicate with your device (NI 6143). You do not communicate with OR-DAQmx itself, but use it to send commands and receive data from your device.

  Cameron T

• Problem with getting communication with old instrument GPIB-ENET/100

  Hello!

  I'm trying to get my program in VB.net to communicate with an older instrument (Infratek 305 A, measure of power) via a GPIB-ENET/100 device.

  The manual of the instrument does not say what GPIB standard, it supports, but the instrument is detected by the measurement and Automation Explorer.

  Detected by that I mean that MAE has detected an instrument located on the right GPIB address, but indicated identification is the output measure instrument string

  instead of the name of instrument (as shown for some more recent instruments of Agilent).

  When I run my application, I followed the communication with NISpy.

  Configuration of the device seems to work and I present only once in the program.

  The problem is reading data from the instrument. Whenever I read the data, I get a correct string of the instrument. But the problem is

  I get the same data in two consecutive and all readings first after that I get new data and also these new data are received in two consecutive readings.

  According to the manual of the instrument the instrument generates the data as follows:

  "A row of data ends with CRLF. The instrument can send multiple rows of data. "When all of the data transfer is complete the EOI (end or identify) is sent.

  My endpoint settings are:

  Send EOI to write complete: YES

  Terminate read on EOS: No.

  EOS byte: 2

  8 bit EOS compare: YES

  Define EOI with EOS on write: No.

  How can I configure the GPIB-ENET/100 to work with my instrument?

  Here are som NISpy logs:

  # Configuration #.

  61 ibwrt(UD3, "C0C2C4C8..", 10 (0xA))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.671 call duration 00:00:00.079
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  62 ThreadIbcntl()

  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.750 call duration 00:00:00.000
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  63 ibwrt(UD3, "K0K3K5K9..", 10 (0xA))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.765 call duration 00:00:00.125
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  64 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.890 call duration 00:00:00.000
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  65 ibwrt(UD3, "F14F18F24..", 11 (0xB))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.890 call duration 00:00:09.250
  ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

  66 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:53.140 call duration 00:00:00.000
  ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

  ### LU ###

  437 ibrd(UD3, "*AC/1.0A480V/...", 1024 (0x400))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:58:52.484 call duration 00:00:00.094
  ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

  438 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:58:52.578 call duration 00:00:00.000
  ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

  439 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:58:52.578 call duration 00:00:00.000
  ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

  Hello!

  I don't have the opportunity to test with other controllers.

  However, I found a solution to my problem.

  The instrument should output 4 lines of data.

  L1 - line with comments

  L2 - line with current values

  L3 - line with the values of voltage

  L4 - line with power values

  The first line of the reading stops the instrument of implementation of additional measures.

  The measurements in the instrument began reading the last line of data (L4)

  The problem was that the instrument for a reason any also released a fifth line, which was empty.

  Read this line 5' th stopped the instrument again.

  By configuring the HW to finish reading on EOS, with EOS PMQS, the value byte, I could read the

  buffer of the instrument with a line output instead. This way I could read just L1 - L4

  and the instrument could work again.

  Next time I should read data from the Instr. first of all, I would like to read the empty line, then

  L1 - L4.

  Why the outputs Instr. an additional empty line will be left not resolved.

  My problem is solved.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• Computor stop communicating with the wireless printer

  My computor Asus seems to have stopped communicating with my HP printer / scanner today, when I run convenience store he tell me the printer is offline. We changed anything. He has worked in the last two years very well.

  Hello

  What is the model number of the HP printer?

  You can try the following and see if they help.

  Method 1: Try to set the printer online.

  a. open the start menu and click on the "devices and printers". This will open a window with a list of the printers currently installed on your computer. Right-click on the printer and select "Use printer online".

  b. clear all print jobs. Double-click on the printer, then go to the Menu "printer" and select "Cancel all Documents." It could be a stuck print job that would cause the printer go offline. Try once more to put the printer online and try to print a test page.

  c. turn the printer off and then on again. Check if the printer is blocked. Check all the network connections to make sure that none are loose.

  Method 2: refer to this link and check if it helps .

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Also check out these links and check:

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

• OfficeJet Pro 8600 Plus: PC stopped communicating with wireless Officejet Pro 8600 more

  My HP printer has been connected to my PC via my home wireless network and work without problem, for 18 months.  A few weeks ago the printer stop appearing in the printer dialog box when I went to print a document.  The printer continues to operate wireless for all my mobile devices without problem.

  I went through all the HP process and tools for troubleshooting, downloaded and installed all updates, nothing helps.  I uninstalled my PC off and now it will not reinstall.  The installation process see the printer on the network, but when I try to install it it said "cannot be installed on the network" and it goes no further. I lost hours and hours trying to get to the bottom of it, nothing helps.

  What is the problem?

  Hi @Layli,

  Welcome to the HP Forums!

  I noticed that your PC has stopped communicating with your HP Officejet Pro 8600 wireless connection more. I'm sorry to hear that, but happy to help!

  Out of curiosity, what happens if you install the printer using the USB method wireless configuration? Check out this guide, your wireless printerand select Configuration USB wireless.

  Also, if this does not work, able to install the printer are you using a USB connection? In this way, we can see if the problem could be the connection itself or not.

  You see error messages on the control panel of the printer at all?

  Thanks for posting and hope to hear from you soon!

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.