Blackberry Simulator does not properly

Similar Questions

• BlackBerry.utils does not properly

  Blackberry.utils package does not work as described in the last SDK WebWorks.

  First, the space of names so that it won't, according to documentation, it should be Blackberry.utils, but it's actually just "Utils" (at least for me). Bar package manager can not find a feature with the id "blackberry.utils" unless you manually change the manifest to say "blackberry.utils" instead of just "utils".

  But even in this case, missing funtions as blackberry.utils.stringToBlob.

  For this reason I cannot create/save/load files using the SDK WebWorks, is this a problem on my end or there at - it something wrong with this version of the SDK? (I already tried to reinstall)

  Ah yes, that would explain then. The Utils API is not available on BlackBerry 10:
  https://developer.BlackBerry.com/BBOS/HTML5/APIs/BlackBerry.utils.html

  It was available on BBOS and PlayBook. If we check the BB10 docs, it is more listed in the API reference:
  https://developer.BlackBerry.com/HTML5/APIs/

  To save/load/create the files using the SDK software BlackBerry 10, we now have the HTML5 Filesystem APIs, which shouldn't require the Utils APIs:
  https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.IO.html

• Blackberry Simulator does not

  My Stimulator works does not in vmware player...

  It's my system configuration:

  win xp proff 2002

  Intel (r) Pentium (r) D CPU 2.80 GHZ.

  1 GB of RAM

  I think that your PC is too slow for Simulator. Must virtualiztion of material (or at least graphics acceleration) and up to 2 GB of RAM. Without this Simulator is unusable.

• BlackBerry Desktop Manager Blackberry Smartphones does not properly

  Hello

  I plugged my flashlight on the USB as usual and connected to the Office Manager, hoping to transfer music to Itunes. But for some reason it isn't letting me transfer any music on my phone.

  It is said "If your BlackBerry smartphone uses a Bluetooth connection or is not connected to your computer, you need to connect with a USB cable for import and sychronisé media.» If your device is already connected, plug it in again to start a new connection. "Your device must be on mass storage mode and a memory card or additional built in storage for multimedia files.

  I tried to unplug and reconnect, reset my laptop, uninstall and reinstall the Manager of office etc..

  Can anyone help?

  Thank you

  So, do you have active MassStorage?

  1. go to Options > Media Card
  (some themes or BlackBerrys can call this ' settings > Media Card ")

  2. check the following parameters (if they are that way, then changes according to the following:)
  (a) media card Support: on
  (b) mass storage Mode Support: on
  (c) auto Enable mass storage: Yes

  3. save the settings and exit

• Player media 8100 blackBerry Smartphones does not properly

  Hello everyone, I'm having a problem with my new Pearl 8100 on T-Mobile. I have a 2 GB sd card. I don't see any albums or lists or anything like that. I can't play a song, when it ends, I can only get through or replay. I reformatted and pulled the battery. Any help would be appreciated.

  Thanks for answering, I had my Pearl old brothers for a few days before I bought mine. There 4.2.  The same card worked fine on it. Maybe I'll try to get the handset to 4.5 to see if that helps

• Profiles of Notification of blackBerry Smartphones does not properly

  When you press the speaker icon on your home screen, you get the menu Select a profile that includes items like all alerts, Normal, Loud, medium, silent, vibrate onlyand only phone calls.

  When I put my camera in phone calls only, I still want to see the red LED message indicator when I get a message or a notice, I don't want to make a sound.   * The sound definitely cut the sound correctly, but I don't get the LED light *.

  Any thoughts?

  Torch 9800, carrier: BELL, 6.0.0.695 (6.0.0.246) software.

  romeomont wrote:

  When you press the speaker icon on your home screen, you get the menu Select a profile that includes items like all alerts, Normal, Loud, medium, silent, vibrate onlyand only phone calls.

  When I put my camera in phone calls only, I still want to see the red LED message indicator when I receive a message or an indication, I don't want to make a sound.   * The sound definitely cut the sound correctly, but I don't get the LED light *.

  Any thoughts?

  Torch 9800, carrier: BELL, 6.0.0.695 (6.0.0.246) software.

  Hi and welcome to the forums!

  I have a 9550 with 5.0 OS, OS 6.0 device may be different.

  I can set my profile to only calls, then scroll the gift to put ringtones and alerts. Of course all the sounds are turned off, but each category lists the LED on or off for the messages.

  Do you think that as well?

  Thank you

  Bifocals

  EDIT: Just tested works well the and!

• Scrolling the page does not properly respond to BlackBerry Curve9360

  Hello friend

  I have developed applications for BlackBerry (JqueryMobile, Phonegap) the application works fine in BlackBerry Torch 9800.

  But once I've installed in BlackBerry Curve9360, scrolling of the page does not properly, that I am not able to view the complete list of items and long text.

  Help, please

  I came up with the solution, the problem occurs because BlackBerry Curve 9360 isn't a touchscreen, there fore scroll doesn't work.

  In my applications, I add 2 pages "index.html."

  on the first page, you have to test if the device is not touch and redirect to the second page.

  Do not use the page for "BB Curve" scroll and any other animation like CSS "" - webkit - transform: translate3d "»

  The other js script go without a problem.

  The page "BB Curve" to redesign the html for use with the cursor,
  For example, the menu is smaller, the police is smaller.
  the size of the screen is fixed.
  Dimension height is better indicate a value min eg 300px
  etc...

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Simulation does not stop in the Loop Simulation & control

  I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

  Now, I've implemented nearlly all, but now the simulation does not stop.

  First here is a picture of the .vi when it still works:

  

  But this isn't the end result, I want to have.

  I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

  You can see from the image below:

  

  If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

  The .vi is attached. I hope someone can help me.

  I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

  But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• fan does not properly

  Does not properly on the laptop

  Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• simulation does not work

  I composed a few diodes the wizard of components, such as the diode acts like a switch perfect to 0.7 volts.  For some reason any SPICE simulation does not run.   If I include one of these diodes in other circuits, the circuit will not simulate.  The diode model is the problem.   Any ideas how to operate?  Attached is the file multisim

  Thanks in advance!

  "- Checking SPICE netlist for perfectbridge - Thursday, February 5, 2015, 11:51:34-"
  = SPICE Netlist verification completed, 0 error (s), 0 warning (s) =.
  Model 'diodeperfect__perfectdiodes__1': 'IS' parameter must be greater than zero
  doAnalyses: incorrect use of the parameters of the model
  Cancelled simulation. "

  So: right-click on one of the diodes, select 'Properties' - 'Value' tab - press "Change model" button - box 'Use default' for 'IS' - press "Change all 4 elements" - press "OK".