BlackBerry smartphone charging by induction

No facilities exist for charging the battery of dtek50 induction

Hi @rudevi

The DTEK50 does not support loading Wireless, sorry

Tags: BlackBerry for Android

Similar Questions

  • BlackBerry Smartphones charger no longer works

    I had my playbook since December and yesterday I went to load my playbook by using the wall charger supplied with the charger and it is cool.  Does anyone know if Blackberry will replace the charger?  If so how can I go about it?

    Make sure that it is the charger and not a problem with the USB port ON the PlayBook?

    Connect to your PC using a USB cable... Open the BlackBerry Desktop Software. You show the connected PB?

    But yes, to dial your number of warranty service.

    http://us.BlackBerry.com/legal/PlayBook/limited-warranty.jsp

  • BlackBerry smartphone charger question!

    I got the Curve 8900.

    Almost every day of the end of the day my battery is half full. I ave to load for the night because I know that half of the battery don't will last me all day the next day.

    By keep me charge my phone when he didn't need, am I damage the battery? or the battery life?

    Thank you

    Hello and welcome to the Forums of Support BlackBerry.com.

    No, you do not damage the battery. These Li-ion batteries like to be upgraded when he is able. They don't like NOT be drained and exhausted. Empty the battery every day night really to them more. Not contstantly drain from the battery to 15-20%.

    At any time, you have 10 minutes to load, do it.

  • BlackBerry Smartphones charger compatibility

    Can I use my old model charger for new 8330 8700?  Are they compatible?

    Altogether. Can of course. I do, even those of my 7100.

    All models 71xx, 81xx, 82xx, 83xx, 88xx 9000 use the same Mini-USB charger.

    The 95xx use Micro USB.

  • BlackBerry smartphone charging my BlackBerry in Europe

    If I travel to Europe from the United States with my ordinary American charger, I need transformer to charge my phone, or would I just need to move to a European style charger? i.e. is the brand of voltage difference a difference when the load?

    Many BlackBerrys come with different plug adapters. If you don't have that, you need transformer for your listing of American style, or get a plug of charger of European style.

    So yes, anyway.

  • BlackBerry smartphones charge my phone

    I just got my phone today and the phone works well, but all what I plud my charger into the phone the lightning does not blink it just there but my phone is charging, but I like it when my phone flashes when the charge please help aw is not something wrong with the point of sale or etc.

    You need to update your operating system if your lightning flashes but my problem is solved I updated my os to 5os fixed of all its

  • BlackBerry smartphones charges your phone...

    Hi all, recently got the new update for my bb and I was just wondering how do you know when your unit is fully charged? Thank you!

    Bolt lightening on the icon indicator disappears and a gray color icon shows on the contrary.

    On the last version, v6.0.0.448 Bundle 1879, to lightning flashed instead of being right there as in the past. A little cool that way. It is replaced by a grey icon when the battery is fully charged.

    I hope this helps.

  • Problems of blackBerry Smartphones charge / sync apps

    Hello

    I have a new BB and a few applications downloaded via laptop computer.  But I can't seem to load via BDM, they are not recognized as apps. Those that I downloaded via OTA is recognized on the BB device, but I can't get to work, they will not even appear in the BDM Add - in Module Configuration, list when I try to sync with my laptop.

    The applications are made for BB OS "BOLD" (e.g. the most recent version of SplashID.)

    BB Bold 9700 / device Code BDM 5.0.0.x / 5.0.1.37

    Carrier: Swisscom (Switzerland)

    I'm sure it's something simple. Can you help me?

    Best regards, Peter

    I have re-installed from scratch and it works

  • BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

    Hello

    I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

    I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

    Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

    Thank you very much!

    Hello

    It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
    If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

    I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

  • BlackBerry smartphones HELP! Charger port a is released.

    I have recharge my phone before and my mother when to get my phone from me and my charger pulled my charger on my phone port, I as I could again my phone was still not in charge. I would like to know it that this problem could be corrected if I send it to a phone repair shop to get fixed because I don't want to change my phone that I got it 6 months. I would like you to tell me if it could be fixed. Thank you.

    Hi kirstylou,

    Well, it can be fixed, but still, if you are looking for another solution, then I think using an external battery charger can solve your problem, but before that, please try this: organize a good BlackBerry fully charged battery and then test it on your device to see that the problem is only limited to this alone and nothing else was touched.

    Prince

    Click 'Like' If you want to thank someone.

    If problem resolves mark message (s) as a 'Solution', so that others can use.

  • Error jvm 102 on Blackbery Bold blackBerry Smartphones

    White screen with JVM 102 error. How can I fix it without losing any data

    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECPs = com.dataviz.dxtg.stg.excel.xls.
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECCs = Excel97Model
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECMm=()
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPEs Module = ' SheetToGo47-4' ran out of memory while checking (603)»
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPKv = 1
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPNs = SheetToGo47-4
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM: + BORK
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : JVM error 102
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : invalid code in filesystem
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : JVM:INFOp = 2280a8b3, a = '5.0.0.586', o = '5.1.0.146', h = 4001507

    Hello Drgnh

    Welcome to http://supportforums.blackberry.com/

    The JVM 102 error occurs when one or more files COD, either from an application or the operating system itself, are damaged as a result an immediate stop of all processes in the BlackBerry Smartphone is generated, preventing the loading of the operating system boot sequence.

    The BlackBerry software should update the phone.

    Search and download your OS and everything above applies

    By sdgardne 

     

    However, here's what I propose...

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry smartphone Curve 9360 sometimes warms us up a little bit and the battery is discharged

    Hi, my blackberry 9360 is sometimes a really weird thing. Once a week, after that I used the device to check email, check facebook or even simply by removing the door in leather and put it right back it drains the battery at a very fast pace and hotter than usual. I'm not aware immediately, but when I use the unit 3 hours later for example the battery is almost all gone and the unit is warmer than usual. Please not that it is warmer, but at a level acceptable, just as if it had been used during this period of time, not overheating. I charge the unit and check the activity monitor application and the CPU was mainly used by the... Idle CPU. The part of the device that heats is not the battery, but the device itself. It is rather annoying because I don't know when it will happen again. The only email account, I have installed is a Hotmail account and it goes as well with wifi on and outside. Someone has an idea it might be? Thank you in advace for help. Best regards, Alexander

    Hello alexandrejv

    Welcome to the Forums of the BlackBerry Support

    Are sure you you are in an area where you have a good network coverage signal strength or if falls frequently.

    While our BlackBerry devices can feel hot tell a long browsing session, play games, download countinous or all supported. If we hold the Menu for a few seconds, it will open a screen that will display all the programs running in the background, usually five will always be there (host, BBM, Message, phone, browser) you can always check if any other applications. run in the background.

    We should always try to close Applications correctly - avoid using key end to close the applications because it just minimizes the application and let it run in the background. Instead, press the Menu key, select close or Exit to exit the application. Don't let your browser open when not in use. If programs are running in the background, it will also allow overheating and also to quick battery drainage. Please take a look at those Article I don't know that it will help you overcome your problems:

    KB14320 How to maximize the battery life and available memory on the BlackBerry smartphone. 

     

     KB31531 : BlackBerry Smartphone 7 may feel warm during operation

     

    But, if you feel that this device heats up more then average, then you should visit your service provider for assistance.

  • Wipe data security blackBerry Smartphones - how to restore the mail application?

    Feature: BB Torch 9800.

    Provider: t-mobile.

    I had problems with my gmail set up.  I could not send / receive.  Message "blocked service."

    I did a Wipe of security under option.  Now, my Mail app icon is gone.

    If I go into setup - mail accounts, I see the Internet mail option.  It asks me to enter the account of the company, I do not agree.

    1. how to restore the Mail app?

    2. is it possible to do a hard reset of the device to factory default as a new phone?

    3. wonder if I can use this BB torch for email via Wifi only (not the cell provider data service) as an iPod Touch?

    Thanks for your help!

    Hello and welcome to the community!

    email_dc wrote:

    1. how to restore the Mail app?

    With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

    1) register HRT

    • KB00510 How to register a BlackBerry smartphone with wireless network
    • Please wait a 'registration' message reach your Messages application

    2) Remove and return Service books

    • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
    • If you do not have access CMIME, continue deleting
    • KB02830 Send the directories for the BlackBerry Internet Service
    • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

    3) restart

    • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot-~ 5 minutes...
    • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

    email_dc wrote:

    1.

    2. is it possible to do a hard reset of the device to factory default as a new phone?

    There are several methods (which, BTW, no I believe to be useful to your situation):

    • KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data
    • KB14058 How to delete all data and applications in the smartphone BlackBerry using the security option wipe
    • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings
    • KB29847 How to charge a BlackBerry smartphone without using the BlackBerry Desktop Software

    email_dc wrote:

    1.

    2.

    3. wonder if I can use this BB torch for email via Wifi only (not the cell provider data service) as an iPod Touch?

    N ° of BB devices lack a complete email client on them. Instead, they depend on the BIS service to provide messaging functionality. BIS is active when you have also listed Internet/personal email where you currently see only Enterprise. All services of BIS, are sent to the device via data carrier network... contact them are therefore the right approach to discover why their network is no longer to deliver to you the services that you pay for.

    Good luck and let us know!

  • Help of blackBerry Smartphones that apps on my Blackberry Curve 9360 were gone after complete wiping!

    I'm wiping yesterday and when I checked on my "device" option, the "battery" option was missing, where I can choose the level of my light screen. Another thing, it is that my 'analysis of the BB device' were like a stethoscope icon, but after you wipe, the icon changed into a black rectangle with a question in the middle of the matk. Whence this 'battery' device option missing? How do I get him back? If it cannot, how should I do if I want to put my light svcreen level? And I can delete this now rare device monitor 'BB' since I can't find the button Delete like other apps? HELPPPPPP! Thanks a lot for the answers!

    Hello!

    Based on your description, I would recommend a full reload of the operating system. The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    Note that all the apps add-on indeed went from the device... a WIPE is very obedient and removes the add-on apps. Reference:

    • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

    Good luck and let us know!

  • BlackBerry Smartphones Blackberry Curve 9310

    I started the download of MP3 music on my Blackberry Curve 9310, OS 7.1.

    It has been loading for 2 days and my phone will not work.

    I did and A:LTt RST, but it did not work.

    I pulled the battery several times and plugged the charger, but that did not help either.

    My phone is still stuck on loading.

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

Maybe you are looking for