BlackBerry Smartphones BB Pearl - 8130 - vibrate + Tone = vibrate only?

I have problems with my new Black Berry. Its the 8130 series.

Any profile choose to be active (Loud, normal, phone only, etc...) When I select vibrate + ring only vibrates... How to fix my phone to vibrate as my ringtone?

Thank you

~ M

Hello

I return the unit and make sure you get a NEW phone as opposed to a refurbished model.

Thank you

Don't forget to adjust your thread. Put the check mark in the green box containing your answer!

Thank you

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones active new SIM - now phone SOS only

    Hi all. Have a little problem. I had to go back to an old 9700 When my current iPhone broke. I needed a new card SIM from the iPhone using a different card. When I called Rogers to activate the SIM everything was fine for about a minute. I received texts that were pending since Sunday when my iPhone broke. I had full bars etc. Once a minute, he went to SOS only. While I was on the phone with Rogers Tech Support I have reset and removed the battery and SIM and all the things they wanted me to. Everything looks good on their system, he said that the problem must be with the device.

    A bit on the device:

    Originally with Mobilicity in 2009. Opened and used with the wind. My father then used with Rogers and Fido. Since Sunday, when my phone broke, I used SIM card of my brother-in-law (he just swung at Rogers to the wind, but his plan has always been paid until the end of September) and the BB worked very well. If it worked correctly with a Rogers SIM.

    Now, I get the same problem with my brother-brother SIM. SOS only. No connection. What happened when active Rogers SIM card must have done something to the camera itself because now it does not connect to any of them. That both SIMs work as I have tested both in my wife's phone.

    The guy on the Support of Rogers suggested that perhaps the closed phone itself - but when I enter the settings advanced for the SIM card that everything is disabled in customization... so it appears not to be locked.

    He said that I should try to reinstall the OS, but that it will block the phone and I need to unlocked again.

    Is there anything else it could be? Will reinstall the OS relock the phone? Any other suggestions?

    Thank you very much!

    Hello

    jvnanu wrote:

    The guy on the Support of Rogers suggested that perhaps the closed phone itself - but when I enter the settings advanced for the SIM card that everything is disabled in customization... so it appears not to be locked.

    He said that I should try to reinstall the OS, but that it will block the phone and I need to unlocked again.

    Is there anything else it could be? Will reinstall the OS relock the phone? Any other suggestions?

    First this... avoid this tech Rogers like the plague. He has no idea what he's talking about. All what he told you is simply not possible. Once MEP unlocked, a BB device can blocked at the factory. Nothing of what you have done or the facilities of any OS can relock a BB.

    I'd rather a complete security on the Device Wipe:

    • KB14058 How to delete all data and applications in the smartphone BlackBerry using the security option wipe

    Otherwise, a ResetToFactory WIPE:

    • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    After each one, put it in the SIM card and switch on the device, and then make sure that the voice is through Rogers. Only then start to worry about getting all the data to work (if you subscribe BIS, in other words).

    If you want to get off the OS Reload path, then the easiest way is, on a PC (you can not do this on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below. (not applicable in your situation)

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry Smartphones setting BB to vibrate for then meeting the entrance is on the calendar

    I got a smartphone that would automatically change the sound profile to vibrate when a meeting was scheduled.  How do I do this with the 9630?

    Lou

    I don't think this is possible within the native operating system.

    You will need to manually edit your profile to vibrate or silent.

  • BlackBerry Smartphones No. rings or vibrates on 8530

    Since yesterday I can listen to no longer have any kind of sounds, whether alerts, ringtones, Pandora, etc.. And my phone vibrates any more, either.  My sound setting is Normal, and I have all the settings 'ON '. I have not updated the operating system for about 2 weeks, so I don't think it was a problem. However, it seems that this started right after scanning a bar code on a site for a film. I went to the site to watch the trailer and there was a bar code, saying to scan for more movie content. He started to play a video, and a few seconds inside my locked phone. I had to turn off because none of the keys worked. I have it turned on, but did not really notice that there is no sound. I had to put the phone in silent mode, because I had to go to work. It was after this that I have not noticed any noise.

    I'm on my way to the nearest Sprint Store to see if they can fix it. All the suggestions of the members of the forum would be appreciated.

    Thank you.

    Hi Baanthos,

    What happens if you remove and reinsert the battery? The same problem occur?

    If so you can take a look at the following article also (if applies to a version of software different, but sounds like a similar problem):

    http://www.BlackBerry.com/BTSC/KB24307

    See you soon,.

  • Another blackBerry smartphones... Text tones

    I can't find a way to change the ringtones depending on when you receive a text message...

    I'm really not this incompetent promise.

    lol, I think you, of course, I do!  j/k

    Profiles.

    1. Select the profiles icon

    2. a box will appear where you can quickly choose between Loud, vibrate, quiet, normal, phone only, and outside. If you like quick-change device profiles and select the one you want and get out.

    3. If you want to change the tones assigned to the applications in the device and then select the last option, Advanced Options

    (some older models and 'Advanced' OS 4.1 and below will not step - so advanced is not present go directly to step 4 below).

    4. Select the profile you want to change. (Loud, vibrate, quiet, Normal (default), phone only, Off)

    Note: on the 8100, 8800 and 8300 models: do not click on the trackball. Instead of this, click on the menu button to the left of the trackball).  Note: The profile that is in use will tell: (active)

    5. you will now see a list of all applications that can have an assigned tone (browser, calendar, level 1 Messages, Messages ([email protected]), Messenger, MMS, phone, SMS, job ect..)

    6. Select the application you want to change the tone / notification for

    7. you can now edit the tones of the case and Holster / notifications.

    (a) select between: none, Tone, vibrate, vibrate + tone

    (b) select the range that you want to use

    (c) Select Volume (the options are mute, low, medium, high, climbing)

    (d) to select the number of beeps (the options are 1, 2, 3)

    (e) select Repeat Notification (options are None, flashing LED)

    (f) if value vibrator or vibrate + tone and select number of Vibrations (the options are 1, 2, 3)

    8. repeat a to e for each of the applications set out in number 5 above

  • BlackBerry Smartphones My Pearl 9105 doesn´t recognize the sd card. And Don t have access to my boxes of email´s. help please

    I bought a new card to 16 g. initially, it worked well, but has errors. Now, do not appear on the device. already formatted the pc and the phone and nothing. Also have problems of access to management e-mail accounts. I can not enter. I read on the internet, which is a fault for installing the Portuguese language.

    I need help.

    My 6.0.0.668 v platform version 6.6.0.236 batch 2950

    Try using your BlackBerry browser to go to www.blackberry.com/integrate to set up your email address.

  • BlackBerry Smartphones text your vs send tone

    Is there a way I can change the tone of the text message to a different sound that the tone of the e-mail when the phone is set as Loud? For now, the two share the same tone; I want to ignore your email but do not want to miss the text messages.

    Got it, thanks!  I never thought to scroll further.

  • BlackBerry Smartphones BB Pearl not recognizing Media Card

    I have a Kingston 2 GB MicroSD card installed in my BB.  He works very well for the past month (since I have the phone) and has 4 or 5 images and 5 another 6 ringtones stored on it.  Earlier this week, I had been hanging the phone to the computer with the USB cable and it would ask me if I wanted to access the media.  I would say no and continue on from there.  Then Wednesday, all of a sudden the BB began to no longer recognize the card.  Today, I went into the settings and they are:

    Map of media Support - on

    Encryption mode - no

    Mass Storage Mode Support - on

    Auto enable mass storage Mode when connected - invites

    A memory card is not currently inserted in the device.

    I take the media card and plug in the computer and it is still showing all the files there.  When I plug the phone to the computer, it is not recognized by the computer.

    Any suggestions?

    I found something Spingineer here (http://supportforums.blackberry.com/rim/board/message?board.id=8100&thread.id=11781) and tried.   It worked like a charm.

  • BlackBerry Smartphones BB Pearl 8220 Flip - external display troubleshooting.

    On a few weeks ago, my father has updated my BB Flip 8220 with the Desktop Manager software that comes with the phone. When he gave me this back, I realized that the external display is empty or just said "T Mobile". Then I noticed several things: when someone would call me, their caller ID would not appear. When anyone text me, I was not able to preview the text I had before. Finally, I was not able to display the elapsed time between the external screen, so I have to unlock my phone to do.

    I looked at other threads that consider external display problems and read about the technique of picking off the dough. But before reading this, I did several times and nothing changed when I turned it back on.

    Now, that said, my question is: 1) is because of my father, blackberry Desktop Manager software update? I lost the usb cable that connects my phone to my computer, but wanted to check if it's something that I could fix it from the phone itself.

    (2) and if it was because of the update, as it did, where would I go to fix it (in the Desktop Manager program).

    Help, please!

    I just found the real solution by reading the post below.  Open the Blackberry Desktop Manager when your 8220 is connected to your PC.  Open Application Loader.  Install the Blackberry attachment Service.  As soon as it finished installing my external screen was back to the clock.  My T-Mobile SIM is currently out of the House and the phone is locked, so I can't try Caller-ID or other alerts until tonight, but if the clock is back I think everything's too.

    Thanks to zwood to validate the correction below.

    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8200&message.ID=1170&jump=true#M1170

    Neil

  • BlackBerry Smartphones BB Pearl Flip 8220: dropped calls, card memory, Opera browser, battery replacement, ringtone, contacts?

    8220 drops on the Workbench encrypted WiFi network calls.  I put the Wifi network options.  I have no wifi connection problems with my computer that uses the same network.  How can it be improved?

    What is the largest microSD card available for media use (especially music) on the BB 8220?  What does 'convert for optimal reading"during the copying of music files?  Why not my computer Windows XP does not recognize the Blackberry without launching the Desktop Manager?

    I'm told the software Opera Mini is a browser better than T-mobile browser.  I tried to download Opera using the browser from T-mobile for the handset without success.  Any suggestions?

    Is there a battery high capacity that can be purchased for this device?

    Can I set the phone to ring for a longer period of time when profiles are set to 'Loud '?

    How can I copy all the contacts on the Blackberry on my SIM card at the same time?

    Thank you.

    I'll try to answer some of your questions.

    The media card is consistent with the version of the OS on the BlackBerry. The model is irrelevant.

    Look at the Options > about, third line down, starting with a 'v.4.xxx '.

    Maximum capacity:

    BlackBerry Device Software media card size limit

    BlackBerry Device Software 4.2.0 - up to 2 GB

    BlackBerry Device Software 4.2.1 - up to 4 GB

    BlackBerry Device Software 4.2.2 - up to 4 GB

    BlackBerry Device Software 4.3.0 - up to 8 GB

    BlackBerry Device Software 4.5.0 - up to 8 GB

    BlackBerry Device Software 4.5.0.81 and above - up to 16 GB

    BlackBerry Device Software 4.6.0 - up to 32 GB

  • BlackBerry Smartphones BB Pearl Windows Live Messenger problems

    I have Windows Live Messenger icon, but when I click on download it gives me an error:

    Device software downloads

    Sorry, your session has expired. Please close all browser windows and then return to the home page to start over.

    Any ideas?

    Thank you

    J Ricketts

    Yet once solved my problem. Browser settings Internet and java settings not configured properly.

  • HELP blackBerry Smartphones: I BIS, but BBM and Gmail only works on network and NOT on wifi

    Hi all, sorry in advance if this problem has already been postponed.

    I myself recently had a bold 9900. Everything worked well, but I met a pretty big problem which I spent hours looking for fix on the internet today, but nothing helped. So I decided to make an account on here to see if anyone can inform me personally with a solution. My carrier is O2 (UK), but I use the sim card while living abroad in Czech Republic. I don't meet with this problem on my previous BB (torch).

    I buy a monthly BIS data plan and it is still active at this moment - it is clear from "EDGE" that appears at the top right of my screen when the network is enabled or "3 G" (with the blackberry icon) .
    When the network is running - my BBM, Twitter/Fb apps, Gmail, browser all works fine (as it should) because of my BIS.

    The problem:

    Once I turn the networkand activate wifi WE, my BBM and Gmail work & the BB icon disappears from the top corner, instead of move slightly down to accompany the icon of intensity of the wifi (which would always be the case on my previous BB) right.

    What is even more strange, given that BB icon is still missing, is that my BB Facebook and Twitter apps still work fine with wifi on, just like the Explorer... So why not BBM and Gmail?

    (Which makes me ask: I thought that the BB Facebook and Twitter apps necessary BIS to work?)

    Anyway, once I enter the 'wireless network' > menu > 'Troubleshooting' > "Wifi diagnostic", the following errors are displayed:

    (1) UMA connection error. Status: Error of wireless network

    (2) infrastructure blackberry connection error.

    I tried to return the directories of service, which made no difference.

    Help, please!

    Well Yes, I tried yesterday (restore to factory wireless settings) does not. I have now restored the mobile to factory settings and I'm relieved to say that the BIS now works just the wifi.  

    Thanks for your advice anyway.

  • Trackball blackBerry Smartphones has decide to stop working or only when he feels like it

    Hi Please help

    the trackball on my 9300 stopped working, I have taken battery out and rebooted but still not good ideas please x

    Hello!

    Your problem seems to be more a problem of material rather than a software problem.

    So would ask to visit your neares, Center of BlackBerry services licensed for the treatment of the issue.

    I hope that solves your problem!

    If your problem has been resolved then would you be asked to click 'Like' and accept as a solution so that other advisors invest it times on this Message more.

    Thank you.

  • BlackBerry smartphones is there a way to remove only certain history?

    I was wondering if there is a way to remove only part where some history in my web browser, in my phone and still leave a bit of history, where it's not like I deleted nothing.

    Yes you can.

    1. open the browser.

    2. press the button on your blackberry.

    3. highlight and select 'history '.

    4. scroll to select the desired item or the same day in history and click on the blackberry button.

    5. highlight and select 'delete '.   The element that highlighted you will be gone.

  • BlackBerry Smartphones E-mail password doesn't work only on the BB?

    BlackBerry Tour Guard gives me error for my email password is wrong, I'm having the problem now with my hotmail email on my BB yesterday.  I tried to remove my battery, I got like 30 + times, I even deleted the email from my phone.  Now, I can not add, he repeats to me that it is an invalid password and it cannot validate and communicate with hotmail.com.  I even changed my password on hotmail.com, I just connected my Hotmail on the computer with the same password, the same one that won't take my BB.  When I put my password on the email settings page, it says "processing, please wait...". "Then I get this error"address incorrect email or password. Check your email address and password.  If the error persists, contact hotmail.com. "I have other email accounts on my phone that work very well.

    I hate to say, but give it several hours or later today and try to add the account back to the BIS then.

    I don't know why it does not now, but I have seen before not working and then mysteriously later.

Maybe you are looking for

  • How to not show the windows in safe mode (pop-up), start in safe mode

    Firefox Safe mode Safe Mode is a special mode of Firefox that can be used to troubleshoot issues. Your add-ons and custom settings will be temporarily disabled. You can also Reset Firefox if you want to start fresh. Start in Safe Mode Reset Firefox T

  • Officejet Pro 8620:8620 cartridge problem

    Recently, I ran downstairs on the yellow cartridge and replace it with 951XL. This was the first replacement of cartridge for my printer. I have a cartridge problem error that I couold not clear. I assumed it was a faulty cartridge and had the intent

  • Setup error: cyclic redundancy check

    I use a build of Windows XP disk to install XP on a tower PC. After doing a full format NTFS and during installation, an error saying: SXS.dll: Syntax error in the file manifests or political d:\i386\asms\10\MSFT\windows\gdiplus\gdiplus. Man on line

  • Jet office 6600 to work with all in one computer (scan)

    I have a hp officejet printer/scanner/fax/copy 6600 and I have just purchesed an all in one HP computer.  The printer software is not supported by Windows 8, and I can't get my scanner to scan to my computer.  Help, please!

  • Default AutoPlay problem

    I seem to have a problem with my Win 7 AutoPlay feature. When I go to the program "Choose a default value", there is only one or no programs listed. How can I call up the other (good) program to use? Kind regards... John