BlackBerry Smartphones Blackberry 8320 camera Zoom feature

Similar Questions

• BlackBerry Smartphones camera zoom feature

  The zoom on my camera function no longer works.  What arrangement would do that?

  Maybe just a small software problem. Try to reset the device by removing the battery for 30 seconds and replace it. The unit restarts in 1 to 3 minutes. Then try to use the zoom on the camera.

• Camera zoom in or out blackBerry Smartphones does not not in the blackberry curve

  camera zoom in or out does not work in the blackberry 8520 curve,

  Thank you

  jiteshright wrote:

  any man more solution...

  So, after you have done this, your Zoom work? Do the reset in this way:

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• The 8520 blackBerry Smartphones camera zoom

  Hey all my camera zoom is now does not work while he was before

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now to try the camera > zoom again.

• BlackBerry Smartphone camera Zoom has stopped working - trackball does nothing. Very strange loophole.

  I just take a photo using my Curve 8900 still shot camera feature.

  Normally moving the trackball to 12 o clock position zoomed out a bit

  and he moving to position 6 oclock zooms back to 01:00 x

  But today, I noticed that it works at all.   The trackball works perfectly for scrolling up and down in menu lists.

  Also, it works correctly in all directions when you zoom an existing photo.

  It's just that the zoom feature when aiming a shot to take the picture just stopped working.

  What it is on the resolution makes no difference.  I have mine Superfine value and 2048 x 1536 pixels and Flash and the White Balance both the Automatic value.   I can not even a replacement for zoom as Z touch which is not bringing the function.

  Can stop working in the camera, trackball but work in other applications?

  I'm mystified by it.

  Hope someone knows what is happening here.

  --

  Plado

  Dear Plado (that's me!)

  Have you tried the phone then next turn once again as in a reboot of the switch?

  Yes I tried, but it made no difference.

  Have OK you tried to turn off and take out the battery and do a boot cold?

  No, but I'll do and see if it makes a difference!

  Doing a job?

  Yes he did, and the zoom is now working again and has a level of zoom of 1.0 to 2.0 in increments of. 25 x.

  Well I have never! Who would have thought it?

  I'm still none the wiser as to why he needed a cold start or why he's stuck without prompting me.

  It's just one of those things. A kind of BLOB, with eyeballs that palpitate, just one of those things!

  So thank you to all those who felt as you respond to this, the problem is solved, but I still want to know why it stopped working.

  --

  Plado

• BlackBerry 8320 smartphone browser

  When I select the browser icon on my Blackberry 8320 smartphone, I don't see a browser window, just a list of options:

  Services

  E-mail accounts

  Parameters

  Change device

  Language

  Password

  Service books

  Help

  Close the session

  If I press the menu button, the displayed list does not include "go to."

  My email account is set up, and I can send and receive messages. My connection works fine.

  You are not connected to the mobile blackberry site.  Select disconnect, then press the Apply button and select close. Once you have done this, return to the icon of your browser and you will be able to get on the internet.  Don't forget not that by pushing the red button does not close down your application when well even you do not show it.  He always uses the memory to the top, you must close in the menu part, especially the internet and other

• Data transfer Palm Pilot IIIx for Blackberry 8320 blackBerry smartphones

  Thanks to BBSingh for help posting this message. I would really appreciate help from the members of the forum to provide a remedy that is known to work with my Palm and Blackberry.

  My problem is changing my old (December 1999 vintage) Palm IIIx data to my new Blackberry 8320. Years, I have used the Palm in conjunction with a Motorola L7089 (April 2000 vintage) and their IR ports for data transfer; Unfortunately, the phone fell in water and after drying carefully, he could make and receive calls again its screen remains empty, so no need to send SMS and most of the functions. Sales team convinced me to buy the Blackberry, but I'm starting to wonder if I've been conned, as usual with sellers once they get your money that they are not prepared to do anything else. New technology has undone me. In the long task of transfer of several thousand items manually I had recourse to the expertise of this forum.

  A tip I found has been updated the Blackberry Desk Top Manager to v4.6 and it would list the Palm in its devices to transfer data from. I did, but the resulting Wizard at the point of registration of the Palm, but it wouldn't activate a greyed on the option button. DTM for Windows status options System Tray icon COM1 has been disabled. I could allow it, but as soon as this dialog box has been closed COM1 returned to the disabled state. BTW, this is a non sequitur on COM1 Hotsync of Palm transfers data to the PC via COM1 and the Palm software tools works very well also. I closed all the related applications of Palm and it made no difference. I tried DTM 4.5 with the same result. As an aside how the icon options DTM is deleted from the system tray, Windows Task Manager should be used to close the application.

  Another tip say to export data from Palm in Outlook Express, then DTM would need to be OE. I enabled OE reluctantly because it is a questionable product, a favorite oxymoron is "microsoft security", has exported the Palm data in a CSV file, but when they are imported to OE it's garbage. Repeat the exercise but exported as tab delimited and got a worse result. Try to import or the other of these abortions in my Blackberry has been a waste of time.

  Another tip say export data from Palm as VCF which can import BlackBerrys, but did not say how they did it. Palm tools allows only the comma or tab files in the delimited export formats.

  MY PC is a Dell 4600 with 2 GB of RAM and 300 GB SATA HDD, XP Pro SP3, so that all the relevant fixes SP3 post. Windows Firewall software, the AV and malware have been temporarily disabled, and I logged in as administrator too.

  RESOLVED - 98%

  A big thank you to everyone who contributed ideas. Here is the solution to most data transfer: -.

  1. install the Blackberry Desktop Manager 4.5

  2. download the latest tools of Palm Desktop Manager which is 4.1.4 (I used 3.6)

  3. perform hotsync of Palm IIIx with Palm tools

  4. disconnect the Palm Pilot from PC

  5. connect the Blackberry to the PC

  6. open Blackberry DTM and check ' device (PIN): "appears

  7. Select the device switch Wizard, grant conditions and the next screen shows active button for Palm devices, click Next

  8 calendar, addresses, etc. are read, previews of each appear for approval; with the exception of the calendar. Click OK to finish and get out

  9. close DTM, disconnect Blackberry

  10, opening relevant applications on Blackberry to check, all transferred no problem except the grille which was empty

  I can live without the old calendar entries and do not have to manually re-create handfull. So the question is settled.

• Smartphones blackBerry 8320 T-Mobile with 4.5 OS upgrade

  I have a T-Mobile BlackBerry 8320 Curve and I try to update with the latest OS version 4.5 and I am having trouble. When I use the application loader that I downloaded form BlackBerry site that he told me that my OS is up to date. Now, after some research, I discovered that available BlackBerry OS but my operator has not yet approved this version of the OS and they don't have any idea when it might be approved. My question is where can I find the file to download for OS 4.5 so I can use the Desktop Manager to install it. I found one or two places, but they form as in the United Kingdom or something, and I hesitated to use it for fear of the adverse effects on my phone. Thanks for any help.

  Here is a link to the latest OS for the 8320, follow directions exactly as displayed in the order as displayed and you should be ok...

  http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/151843-latest-OS-8320-4-5-0-108...

  Good luck.

• BlackBerry Smartphones Help: Latest version of the OS to Blackberry 8320

  I can't find where to download the latest version of the OS to Blackberry 8320 (my blackberry is T-mobile but I'm here in the Philippines, using globe sim card)

  can someone tell me where to DL? THX

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  See the link below for download and simple installation instructions.

  https://www.BlackBerry.com/downloads/entry.do?code=F1298750ED09618717F9C10EA8D1D3B0

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• BlackBerry 10 camera settings advanced BlackBerry Z10 camera

  When I see apps like ProShot and Nokia camera and features they provide on Windows phones, I really feel that a lot could be done with the camera of 10 of BlackBerry. BB10 camera still missing features like the definition of ISO and speed of stutter like we do in manual mode in not even expensive phones Nokia Lumia.

  Is there by any chance possible for BlackBerry to introduce these advanced features to BlackBerry 10 camera in future updates?

  Give your comments or suggestion here www.blackberry.icanmakeitbetter.com could help speed things up.

• Signature problem when you run the program BluetoothDemo on Blackberry 8320

  Hello

  I try to connect from my computer to the Blackberry 8320 using a serial Bluetooth transceiver.  The "BluetoothDemo" program is not function properly.  When I run it, I first see a white screen with "Bluetooth Sample" at the top.  I click on the trackball and I get a menu with the options 'Listening to connections' and 'Full Meno'.  I click on listen for connections and a screen pops up that says "connect to an external device and then type something...» "I type something on the Blackberry and the letters appear, but no other options appear to verify a Bluetooth connection.  I have already associated the Bluetooth with Blackberry, but the connection failed appears when I run the program BluetoothDemo. When I click the trackball again, I see the full menu with "Serial Port close',"Get DB", etc..

  In my view, that there is a problem with secure API signatures.  Obviously the 'BluetoothDemo' program is not run after the first steps.  When I debug on Blackberry, I see the following output from the console, which leads me to believe that there is a problem with signatures:

  ocusHistory: Focus lost; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  JVM: bklt @286061: timer
  JVM: bklt @286061: idle 15
  JVM: bklt @292270: setTimer 15
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  MWC: BluetoothDemo (4738) No sig 0 x 33
  From BluetoothDemo
  MWC: BluetoothDemo (4738) No sig 0 x 33
  BluetoothDemo (167) started
  BluetoothDemo (167) foreground
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  FocusHistory: Acquired Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  FocusHistory: Lost Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  BT: allocSerialPort a0d729a8
  BT: sdpAddRecord
  BT: allocSdpAttributeData
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  BT: SppWrite-1 failed: 1
  Unable to write data. Exception: java.io.IOException: BtSppWrite failed

  I was puzzled at first running the program of BluetoothDemo and initially built and generated a file alx for the com_rimbluetoothserialportdemo program, which I think is used by the BluetoothDemo program.  The com_rimbluetoothserialportdemo program is currently connected to Bluetooth tx/rx, as indicated by the status of remaining devices firmly on instead of flashing (when BluetoothDemo runs the status light flashes, indicating no connection). When I switch between workspaces in which I have these projects, the set of keys is not signed, and I have to sign in again, which seems to cause the keys in the other workspace to become not signed.  As further evidence of the strange signature problem, sometimes when I run either on the Blackberry there is an error that says that the application is not signed.

  I want to delete the workspace and the file alx com_rimbluetoothetc could be a step in the right direction.  Do I have reason to assume that the 'no sig 0 x 33' is a problem with API signature secure?  Could BluetoothDemo access to com_rimbluetoothserialport and be denied because there no signatures?  Thanks for any help you can provide.

  Not sure that your reading of the code is correct.

  _dout.writeInt (JUST_OPEN);
  _dout. Flush();

  These two statements will write out - which seems to be the first thing the code does.  Then it goes into a loop of reading, but suppose a specifically formatted data.

  In my test, I removed these and replaced with something that I thought he would be working and I'm depending on the device.  As noted yesterday picked up O the data of a GPS puck - these things just send data, they never expect anything in return.  So my code looks like this:

  byte [] buffer = new byte [1024];
  for (;;) {
      int len = _din.read(buffer);
      String justRead = "Read: " + Integer.toString(len) + " bytes: " + new String(buffer, 0, len) + '\n';
      System.out.println(justRead);
  }
  

• In IE9, it has a zoom feature that is the size of the screen larger or smaller. I don't find any such feature with Firefox. Can he do this? Do not confuse my question with 'full screen '.

  In IE9, under Tools, there are a zoom feature that adjusts the viewing size. Zoom in or Zoom out. Is this possible in Firefox?

  If you select the menu bar, the View Menu contains a Zoom feature. You can also access the shortcut Ctrl + and Ctrl - if you are not using the menu bar. If you have a mouse wheel, you can hold Ctrl and scroll up and down to use the Zoom feature.

  I believe that by default, the Zoom feature only increases the size of the text. You can change this by activating the Menu bar and unchecking 'Zoom text only', as indicated in the pictures below.

• Compositions for the 3D camera zoom question

  Hello.

  So, I have a question about compositing with 3D in after. I tried to import a drawn to the radius of photoshop 3d object with size 1920 x 1080 with the 3D plugin after and what I want is to turn while the camera's zoom in as in a dolly (from far almost) movement reached a point where the camera switches the object in 3D rotation, which disappears at this point. Streight pretty basic forward camera movement. So what is happening is that while the camera moves forward and to get closer to the object, the objects are pxelate wrong and when the unit is super close, it seems terribly pxelated. I guessed that after that effects condition as image objects instead of the real 3D object then, that sucks semi and so tried to make a larger composition 3D in photoshop then import it to legacy so that when the zoom of dolly-camera movement happens this isn't Pixelize. I made a model of 6000 X 4000 in photoshop and tried to import to after effects and what has happened is that it took about 8 minutes to import the composition (literally) in legacy and when I tried the camera movemenet this has worked, the pixelation-no I mean, but then after effects takes forever to make a change/ram preview or anything at all moving from one image to another takes like 30 seconds or more, even at a quarter of resolution. So obviously I can't work like this at all, especially as it's just a 3D composition which I want to have a lot in the same project. I have a pretty good machine, Quad core i7 2, 3 GB with 8 GB of ram, so there is nothing I can do to improve it. So given this information on what I want to do, can you give any advise how to solve this, if possible? Thank you!

  J

  The only objects that you can move the camera in and no pixelation are vector objects such as Illustrator, shape layers or hidden file strong. In all other cases, when the unit is at the same distance from the layer as the zoom value (object in the center of the model and z = 0, the 1000 camera zoom value, camera centered in the model and z =-1000) the layer is 100% wide and you see pixel for pixel. If you move the camera over nearly half the effective scale scale becomes 200%. It does not take much to end up with a mess.

  Most of the time, if I'm so close, I hide chunks with motion blur.

  With regard to the acceleration of work with large layers I'd watch a downward revision to the resolution of the window of your model (set to 1/4) or learn more about the use of proxies. Get the movement the way you want to look at, light motion blur and make a test.

  If you have really large files you can do the trick of the crop and scale and then stack them in a 3D space and cut between them. Here's the trick. Start with an image that is 10 X the size of your model, duplicate and it reduce by 50%, that duplicate and resize it down 50%. Now crop the original image to 25% of the original size, the second at 50% of the original size of the cultures.  You can do this with the size of the canvas. Leave the last full-size.

  This gives you three images that you can intensify in AE but install away from the camera. The last of them became the wide shot, and as you move in you cut to the next, then the next close of cultures. This keeps the size of the images on 2 X the size of the model, saves a lot of rendering time and makes your publication much easier to manage. The trick is to use the scale property on the first two copies (zoom full width and environment) so that the size of the image corresponds to the next layer below. The broader picture is 400% across (even less), the second 200% scale, and the third left at 100%. You won't have pixilation problems, you will have a more manageable composition and your render time will be reduced.

  I hope these suggestions help.

• How can I create a Zoom Zoom feature on a photo?

  I've created a demo to work in Flash Catalyst. I have photos of a model of a dress. I would like to create a zoom zoom feature so that the viewer can zoom in on the details of the dress. I present this to a customer and I need help.

  Hello

  Here are the steps to make a zoomable image. I recorded a video of this and published here for easy understanding - http://my.adobe.acrobat.com/p72354062/

  1 import an image

  2. create custom vertical scrollbar. You can also use the vertical scroll bar by default. (Optional)

  3 create a custom horizontal scrollbar. You can also use the horizontal scroll bar by default. (Optional)

  4. Select Image, Horizontal & Vertical set scroll bars and convert them to the "scroll pane" using visualization.

  5. Select the image and map "Scrolling content" using visualization.

  6 double-click on, go inside the scrolling content component and create a State doubles for Zoom.

  7. Add a transition (optional)

  8. Add a button inside the Panel scrolling zoom in or out of the image

  9. Add 2 interactions in the button, zoom goto in State and the other to go to zoom back State. You can add directly from these interactions of image rather than create the button too.

  10. run the application

  Concerning

  Srinivas Annam

• Zoom feature

  Hello

  There is a question I get regarding the "Insert-> standard objects-> Zoom box...". ». Or perhaps, rather a function I would but probably overlooked. I'll elaborate:

  I have a project, in this project, I have a "Overview", as soon as you pass your mouse over it, it displays a small image (actually a large cropped image)

  I want the "Zoom box" to actually show the part of the large image, instead of weakening just opened the small picture (resulting in large pixels). I hope that the image below will help clarify what I'm saying and what I want to achieve.

  
  http://img11.imageshack.us/img11/1644/zoomdhj.jpg

  As you can see, the original big picture seems much sharper than the zoomed version in the image that has been cropped. How can I best achieve to keep the quality and still keep the nifty zoom feature?

  I'm also using Captivate 4

  Thanks for the help!

  Hello

  Tklok wrote:

  Double-clicking the zoom destination area and choose a photo, just seems to me the same as "insert a picture->. Am I missing something here?

  While you're right in that the size of the project will likely increase due to the use of a Zoom area, using an image is certainly not the same. It may seem that it is, but believe me, it isn't.

  When you insert an image, the image appears where you inserted it. But he remains in the same position on the screen or the stage. When you insert an image into a Destination of Zoom, it change everywhere where the beginning of the Zoom area is the location of the Destination of Zoom area.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks