BlackBerry Smartphone camera Zoom has stopped working - trackball does nothing. Very strange loophole.

I just take a photo using my Curve 8900 still shot camera feature.

Normally moving the trackball to 12 o clock position zoomed out a bit

and he moving to position 6 oclock zooms back to 01:00 x

But today, I noticed that it works at all.   The trackball works perfectly for scrolling up and down in menu lists.

Also, it works correctly in all directions when you zoom an existing photo.

It's just that the zoom feature when aiming a shot to take the picture just stopped working.

What it is on the resolution makes no difference.  I have mine Superfine value and 2048 x 1536 pixels and Flash and the White Balance both the Automatic value.   I can not even a replacement for zoom as Z touch which is not bringing the function.

Can stop working in the camera, trackball but work in other applications?

I'm mystified by it.

Hope someone knows what is happening here.

--

Plado

Dear Plado (that's me!)

Have you tried the phone then next turn once again as in a reboot of the switch?

Yes I tried, but it made no difference.

Have OK you tried to turn off and take out the battery and do a boot cold?

No, but I'll do and see if it makes a difference!

Doing a job?

Yes he did, and the zoom is now working again and has a level of zoom of 1.0 to 2.0 in increments of. 25 x.

Well I have never! Who would have thought it?

I'm still none the wiser as to why he needed a cold start or why he's stuck without prompting me.

It's just one of those things. A kind of BLOB, with eyeballs that palpitate, just one of those things!

So thank you to all those who felt as you respond to this, the problem is solved, but I still want to know why it stopped working.

--

Plado

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry smartphone App world has stopped working suddenly

    I got the new blackberry bold 9900, changing of blackberry 9800 torch, actually once I spent the peripheral tru to the Office Manager, the world of the application has stopped working, any solution for this, btw, I changed my password and still does not work...

    bermoz wrote:

    When I try to open a session in a massege apears saying;  Unable to connect to your blackberry account.

    While this works for my playbook!

    What is the full message? Sometimes, there is more message... and that 'more' is often useful to better narrow down the possibilities. But if it is, here's a possibility:

    • KB28212 Error "Unable to connect to your BlackBerry ID account" on a smart phone BlackBerry with BlackBerry Device software 7.0

    Good luck

  • BlackBerry Smartphones Bluetooth mic has stopped working

    I have a Blackberry Pearl 8220 phone. I had paired bluetooth etc. successfully and have used for months before.  All of a sudden micro Bluetooth stopped working. The caller on the other end cannot hear me. I am able to hear fine appellant.
    It is certainly a problem with the phone because I tried two bluetooth headsets. Two of them showed the same symptom with Blackberry but worked on other phones.  Hoping someone thre can help.

    With the help of BlackBerry 8220

    platform v4.6.0.293 4.1.0.100

    Tried to do a battery pull several times

    Improved using the bb Desktop Manager software

    have, check the other threads on this forum.  The 8220 simply comes with a defective bluetooth chip and he dies everyone before too long.  I hope that your phone is still under warranty with T-Mobile, because it's the only way to get this problem RIM on you fixed.  If you don't have T-Mobile, RIM is not concerned.  Even if everyone speaks in even on their own forums, they have not even acknowledged that this is a widespread problem.

  • "Rev_5 has stopped working" what does that mean?

    On switching on, windows displays
    Rev_5 has stopped working.
    A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.
    Click to close the program and everything works fine.   What is it and how do I get rid of him?

    Windows Vista with all updates.

    Ignore the above question.

    Ran MALWAREBYTES, SPYBOT , and MS Security Essentials and the problem disappeared.

    Obviously some kind of virus.

    anaelisabet

  • my driver manager has stopped working, it does not support ordinary ordinary style, how can I solve this?

    my driver manager has stopped working, it says it does not support the regular style, how fix that and what would have made that happen?

    What driver manager?

    If this is the third part of drivermanager.com utility you should not use such utility, nor any who claim to "SpeedUpMyPc"

    All these utilities can in the trash worst case your system

  • Just downloaded Lightroom 6. Adobe Photoshop Lightroom has stopped working.  Does not open

    Just downloaded Lightroom 6. When I open it, I get the following message: Adobe Photoshop Lightroom has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.

    I am running windows 8.

    Extremely frustrated that I dropped $ 150 and it doesn't work!

    I understand your concern.

    Please restart your machine in safe mode by pressing the F8 key during the restart and launch Lightroom in this mode.

    If it works well, go to Lightroom preferences > Performance > uncheck "use the graphics processor.

    and restart your machine normally after that.

    In addition, you can consult this article because the question is clearly due to the graphics card drivers.

    Adobe Photoshop Lightroom Help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  • Rear camera / flashlight has stopped working

    I noticed this morning that I went to take a picture my camera back iPhone 6 no longer works. As chance would have, my warranty expired 11 days ago.

    The front camera still works, but I see a black screen when I try to use the camera back. In addition, when the flash icon should be, there is a yellow exclamation point symbol. If I press on it, I see a message that says "Flash is disabled. The iPhone needs to cool down before using the flash. "(The iPhone is not visibly hot).

    In addition, the light will not illuminate.  Type the key does nothing.

    I tried some things:

    * Kill and restart the camera application

    * Restart the phone

    * Charging to 100%

    * Turn off the phone, wait 15 minutes, restarts

    * Reset all settings

    * Erase content and settings and then set up as new iPhone

    At this point, I'm sure it's a hardware problem.

    12 days ago (one day before the expiration of the warranty), I got my phone repaired by Apple to fix the front camera, which was poorly aligned (search for "crescentgate"). The camera and a flashlight worked yesterday, but not today. The phone has not been dropped or wet - it has just stopped working.

    I guess that this pourrait be covered by the 90-day service warranty?  A chat line of Apple representative told me that it should.  But if not, it will be Apple charge me as a replacement for the camera?  I can only find a single out-of-warranty repair costs listed $299 and there is no way I'm paying a lot when companies third repair will do it for $80. Someone at - it experience with this?

    A C & P is appropriate here...

    Here are a few standard repair procedures:

    First of all, try a system reset.  He heals many ailments and it's fast, easy and safe...

    Hold down the power button and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You won't lose any apps, data, music, movies, settings, etc.

    If the Reset does not work, try a restore.  Note that it is nowhere near as fast as a Reset.  It could take well over an hour!  Connect via a cable to the computer that you use for synchronization.  In iTunes, select the iPod/iPhone/iPad, and then select the Summary tab.  Follow the on-screen instructions for restoration and don't forget to say 'yes' to safeguard.  You will be notified that all data (apps, music, movies, etc.) will be deleted, but that the restoration is complete, you will be asked if you want the backup content to be copied to the iPod/iPhone/iPad.  Even once, say 'yes'.

    At the end of the basic restore, you will be asked if you want to synchronize the iPad/iPod/iPhone.  As before, say 'yes'.  Note that syncs selection will disappear and the restoration will terminate if you do not respond within a reasonable time.  If this happens, only applications that are part of the IOS will appear on your device.  Corrective is simple – bottom right of iTunes, choose manual 'Sync '.

    If you are unable to do the restore (or it does not help), go into Recovery Mode according to the instructions here.  You will lose all your data (game scores, etc.,) but, for the most part, you can redownload apps and music without being recharged.  In addition, read this.

  • The 8520 blackBerry Smartphones camera zoom

    Hey all my camera zoom is now does not work while he was before

    Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

    Now to try the camera > zoom again.

  • BlackBerry Smartphone camera icon has disappeared from the home screen. How can I add it back?

    My camera icon has disappeared from all my screens.

    If I use the search function, I can locate and use it.

    Why can't I put the camera icon, press the button of my bb and have an option "add to home screen"?

    I think that 'reset all my icons"can solve the problem, but leaves me with a bunch of fun re-customization.

    Are there no better solution?

    Thank you very much!

    When I did it before, he has not yet shown on the list I think you should MENTION and I checked the properties to, somehow, and the 'hidden' checkbox was not checked.

    But when I tried it now, I see that it is a little different from what I had tried - it worked! Thank you!

  • BlackBerry Smartphones camera zoom feature

    The zoom on my camera function no longer works.  What arrangement would do that?

    Maybe just a small software problem. Try to reset the device by removing the battery for 30 seconds and replace it. The unit restarts in 1 to 3 minutes. Then try to use the zoom on the camera.

  • BlackBerry Smartphones Bluetooth Remote Control stop working

    I have a new 8350i and downloaded the new 5.0.0.80 7 (?) version of the software. For some reason, left work after doing this, the ability of my headset Plantronics Voyager 815 to execute commands remotely (answer, hang up, volume, etc.). Has anyone else got a happen to them? What can I do to fix this? Thanks in advance!

    Well, I have figured this out by myself...

    Removed the battery for 5 seconds - Sprint/Nextel calls this a Soft Reboot - somehow clarified the issue with the bluetooth buttons does not.

    I wonder how many times I have to remove the battery in order to free the bugs in the system...

  • BlackBerry Smartphone camera Zoom does not

    My trackball works fine in other applications; However, he no longer controls the zoom during the

    camera function is launched.  Is there some solution or locked key to bring the ability to zoom?

    Thank you!!

    In general, a soft reset will solve this problem. Remove the battery from the device (while it's still on) for 10 seconds, then insert it again. That should fix it.

  • BlackBerry Smartphone camera Zoom

    I'm having some trouble with the camera on my curve.  It won't zoom, with the trackball or volume keys.  Not sure what the problem is.  I used the zoom earlier, but now it doesn't seem to work at all.  I would be grateful all possible solutions...

    Try a 30 second battery pull.

  • BlackBerry smartphones my internet suddenly stopped working?

    OK, well, it still works on some sites, but on most the websites when I go to them, a box appears that says:

    "HTTP 400 ERROR: bad request.

    The server could not understand the page request, or was not able to process for some reason any. Please try loading a different page. »

    I don't remember my phone doing so until quite recently.

    I checked the Web site on my laptop to make sure that it is a good address, and it is. but for some reason, my blackberry won't go into it.

    Hi and welcome to the Forums!

    Whenever random strange behaviors creep, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    In addition, it could be that Web sites have been modified so that they are more well interact with the settings inside your BB browser.  You BB browser has many parameters which can interact better wth different websites. More importantly, I think that how your BB identifies a website seems to make the most difference - starting in the browser, press the BBKey, then select Options. In the "Browser Configuration" screen, there are several options that can be useful. "Browser Identification" option is that who I think made the more than difference more often - on mine, I can have my BB identify Web sites as a BB, IE or FF browser, producing different results in websites coded better for one or other of these browsers.

    Try fiddling around with different settings to find the combination that best meets your needs. Sorry, but there is no 'best' recommendations for the right combination - everyone's needs are unique, requiring a single solution for them... and only they can find since only they need.

    Hope that helps!

  • My E drive has stopped working and does not even appear as a device.

    I was copying an audio cd to a disc that has been in my E drive.  I took it out and it did not work.  I put a CD - R in the drive closed it and now it will not open and when I go to my computer the drive does not exist.  It only shows my drive D and F there.

    Hi ChristineMorgan,

    Method 1: Run the fixit available in the link below

    Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2: Let flow the fixit available in the article below and then check

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

Maybe you are looking for