BlackBerry Smartphones Blackberry connection information - reminder

Similar Questions

• Remove Blackberry Connect

  HELP me please, I did something stupid, stupid.  I installed Blackberry Connect.  Now, he took my Q.  Is there an uninstall program to use?  The problem is that I can't use the Blackberry Connect to connect to my server from work now. I guess that not in my pay grade.  Government work has many rules, I hate the rules... but I have to put up with them until I can remove, I guess.  But now I have to remove my phone.

  If a post has responded successfully to your query, please mark as answer instead of relatively useful. This will help with the search function of the forum.

• Publish to Webdav still fails to connect, probably because the connection information is never requested.

  Try to publish the Thunderbird calendar to the Webdav server by following the instructions Help article https://support.mozilla.org/en-US/kb/exporting-and-sharing-a-calendar but I have never asked for the connection information. The publication fails with the error "the calendar has no publication. Status code: 405: method not allowed. "I can use other Webdav software enabled on this server ok. Can anyone suggest what the problem?

  Bonoky,
  As I mentioned in my last reply, I think the key is that you must have a calendar on your server program, if the publication function can communicate with it.
  I recommend to ask you this question 'high' to the next level if you want additional help.

  - duggabe
  

• I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information

  Original title: router Question.

  Hi all

  not sure if this is the right place to post but I was looking for some information about routers. specifically, I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information. specifications, etc.

  Thanks :)

  Some routers will define a limited number of simultaneous connections. Domestic routers rarely do because the assumption is that the environment will not include such a high number.

  Ideally in a commercial environment you would separate on the hardware connection since the hardware firewall. It depends on the type of connection (ADSL?).

• additional connection information are necessary to connect to this network windows 7

  Just for the record, this works very well with Windows XP

  I have a question about Windows 7 and x 8021.  You know with windows 7, you can get the popups and the connection using the PEAP authentication.

  If authentication fails for a reason that you will never see the pop-up again.  The only way to solve this problem is to turn on/off the network adapter or disconnect and reconnect the network cable from the port or enter the settings 802. 1 x and out to get the authentication to occur.

  It's the only way I have found to get the pop - up is displayed so you can see that the additional connection information of the message are required to connect to this network to the network so that you can log on to the network.  I also tried this fix, but it does not solve the issue.

  http://support.Microsoft.

  Is there a solution so if authentication or logon fails the pop-up message is displayed so that you can log in without doing the steps I mentioned above.

  Hello

  I suggest you to report the issue in The Forums Pro TechNet Windows 7 IT: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• Web IR client server (0): database connection information is not available.

  Hello
  
  We have improved our system of Hyperion 9.3 to EMP 11.1.2.2. We use mainly the declarant a SQR production and interactive reporting tools.
  
  Using the workspace as an admin if I'm running a BQY everything works fine, but when I try to do the same as other users I get the error "Server (0): database connection information is not accessible." The treatment is off"of the
  
  I migrated everything form the old version and don't have anything since the changes. It looks like a configuration problem and I tried to look and compare all current production (old system 9.3).
  
  Is anyone else facing the same problem before? Any suggestions on the place to watch.
  
  Thank you in advance.

  Hello

  You have to go to my oracle support of website link: https://support.oracle.com/epmos/faces/MosIndex.jspx?_afrLoop=7929796452543&_afrWindowMode=0&_adf.ctrl-state=113hdvh7xd_4

  Connect with your oracle ID and the password that you have for your business and looking for the number of the document in the "search knowledge base" that will appear in the upper right of the page.

  Research shows the document you and you can access it.

  I hope this helps.

• Save the site FTP connection information

  I realized that I can record a MUSE site to the cloud Creative if I can share the maintenance of the site between my two computers. It works very well for if ensure that a site is kept synchronized between two computers. One thing that is not getting synchronized is the FTP information. At the present time I save a small .txt file in the CC with the .muse document the connection information is so convenient when I need to re - type.

  Y at - it a trick or a trick to get the FTP connection information, stored in the .muse file, so I don't have to retype whenever I go to computers?

  Hello

  Please take a look at this discussion, it might answer your question

  Re: 'Upload to Host FTP' identification information missing

• Save ftp connection information

  Y at - it a setting or a patch to make sure that DW doesn't actually save my remote access connection information in the area of site definition? It allows to record ok in MX but 8 everytime I open DW I must enter uname pword to connect to the remote site, even if the "Save" checkbox is checked? A small but very annoying problem!
  

  > Should the window "On Dreamweaver" show update,

  Yes.

  > as mine still says Version 8.0?

  Then the 8.0.2 updater has not installed correctly.

  It is a known issue on some machines.

  The answer is unfortunately reinstall Dreamweaver then immediately
  install the 8.0.2 update again.

  http://www.Adobe.com/go/785362aa

  --
  Concerning

  John Waller

• How to check the connection information?

  Hello
  
  I want to check the connection information to an application. Can anyone suggest how to on this subject?
  
  
  Thanks in advance,
  Annie

  Hello Annie,.

  Have you ever looked at the sight APEX_WORKSPACE_ACCESS_LOG? Is it what you need?

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• BlackBerry Smartphones not connect BlackBerry Bold 9900 to Volvo V70

  I have a Volvo V70 ("nine") 2013 and want to connect my BlackBerry Bold 9900 (os version 7.1.0) using BlueTooth.

  The car does not recognise the BB.

  If I turn the car in "Discover fashion" and on my BB begins to search for a BlueTooth device, it does not find 'My car Volvo' and it allows me to listen to music. However, if I select "Search for phone ' fromout the car, it does not find my BB (BB, BlueTooth = ON / detectable = WE).

  According to the dealer, Volvo has done successfully test the BB with OS 7.0.0 9900.

  The trader has also improved the software in my car ==> stil does not work.

  Someone knows how to fix this?

  The other option would be to downgrade my BB with OS version 7.0.0, but I do not know if that this will solve the problem.

  FYI: Also my BB 9900 has been tested with a brand new Volvo V70 2014 model ==> does not work either. Same question.

  Future prospects for all help!

  Thank you

  Richard

  Hello

  I solved the problem myself, using the information in the following link:

  http://supportforums.BlackBerry.com/T5/BlackBerry-bold/BlackBerry-bold-9900-Bluetooth-failed-connect...

  The last post in this link shows what to do. I did this on my BB and was able to connect now successfully my BB to the Volvo V70. I had to redo the matching 3 - 4 times, but then it worked.

  Kind regards

  Richard

• Not have blackBerry smartphones to connect to internet

  I realized that my phone is unable to connect to the internet, even if I am able to send and receive emails from my phone and my wifi connection is fine. I tried to take the battery, return service directories to my phone and I also went to the registry option in the host routing table but does not change every time that I try to use the Web browser. It loads for a while and then the message "unable to connect to the internet, try again later appears. Is there anything else I should do? Thank you!

  Hello and welcome to the community!

  From your post, I can't tell if you do them in the order required... or know if every successful step as they should before moving on to the next step. So, with a strong carrier signal AND your WiFi radio OFF, I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should contact your mobile provider for formal support... After all, it's their network with which your BB is to have trouble communicating.

  Good luck!

• BlackBerry Smartphones Youtube on Blackberry connection problems

  Hello!

  Each time youtube guides me to connect to my account and I try to log in with my google account information. I get an error message saying "Oops!" An error has occurred. »
  This issue has made it almost impossible to watch videos on youtube for me.

  Please help solve the problem.

  Hello! Technical Advisor ViciousFerret BlackBerry:

  Although did not get a response, but the problem has been resolved after much hassle. I had to call my service provider and they asked me remove some entries from my phone, service book that solved the problem.
  Thank you

• BlackBerry 9500 blackBerry Smartphones to connect to internet?

  guys, anyone here can help me how to connecy my blackberry 9500 Internet? The problem is this: when I try to connect to the browser, the following message appears: «your device has no currently all entries in book of Service Configuration Browser.» Please contact your service provider to enable the browser on the device"or next:"it seems that your device does not have an installed service WAP2.0 book. "

  Hello and welcome to the community!

  I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... ( Please wait for this before moving on to the next step) :

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! Otherwise, you should do exactly as the message tells you to do... contact your mobile provider for formal support.

  Good luck!

• BlackBerry Smartphones-Installation/connection problems - currently version 4.2.2.12

  Recently changed offices our field internal, and after the change from my Office Manager began to ask for the 8830.msi for installation.  I tried to install a new version without result.  I have read forums and instructions and spent the better part of a day by removing all traces of the Office of the registry software and files.  I reinstalled the 4.2.2.12 from my original CD, because I know that it worked perfectly before the domain migration.  Now, I have 3 questions:

  1. when I first launch Desktop Manager, a "Preparing to install" window appears briefly us, then closes (more on that later).

  2. I have specified the same information of BES (confirmed by our BES administrator) but an error message saying that it is not available or specified incorrectly, so I can't join the BES.

  3. when the Office Manager is started, it flashes several "preparing to install" windows, connects to the Manager of office for a few seconds and then disconnects from the Desktop Manager.  The cable is correct, as argued by the device of connectivity to the PC.

  Please help, because I will be monitoring a business device update next year and hope to use the Desktop Manager software on each user (800 total) PC Exchange and enable new devices.

  (1) uninstall the Desktop Manager completely and correctly:
  http://www.BlackBerry.com/BTSC/articles/545/KB02206_f.SAL_Public.html

  (2) install the Desktop Manager too
  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&message.ID=...

• BlackBerry Smartphones cannot connect to the device.

  Hello

  I got a 8320 a few days ago, everything is OK until today...

  I tried to connect it to my computer, but the DM (4.7version) remind me ' unable to connect to the device. Please make sure that the device is properly connected and try again.

  Curve 8320

  Platform: 2.7.0.90

  App version: 4.5.0.110 (152)

  DM 4.7.0.32

  Windows XP Professional

  someone at - he a good idea on this message?

  Hello

  You have little free memory left on your device. 15 MB is considered to be low, you have 8 MB

  You have a lot of third-party applications on your time BB, icall, bbalerts etc?

  I don't know your level of experience, so if you know I'm sorry but if please read and let me

  not know if this is the case.

  Most people close the applications by pressing escape or the red button. This does not close the applications.

  Each application has an option CLOSE. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom CLOSE is listed. Go through each application and then press close. Go to the menu press browser and options select cache operations clear all categories and reached escape it will say cleaning memory

  Thank you

  Bifocals

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=9225#M9225

  If you follow these steps and face up to your memory, your phone will run smoothly. It will be

  also facilitate a good connection with the Office Manager. At the moment the habit

  to do a battery pull just before the USB connection.

  When you have cleaned everything you can, clean again. You really want to stay close to 30 MB

  If it is possible

  Please let us know if you need help with any of the steps.

  Thank you