Publish to Webdav still fails to connect, probably because the connection information is never requested.

Similar Questions

• I created a pdf file on my computer that has several links to to other PDFs, word documents, etc. When I send this to people that they cannot access the links. Probably because the files in the links are only stored on my computer. Any ideas?

  I created a pdf file on my computer that has several links to to other PDFs, word documents, etc. When I send this to people that they cannot access the links. Probably because the files in the links are only stored on my computer. Any ideas?

  Of course, it's an option as well. You can attach files to the main PDF file, or you can merge all files into a single PDF portfolio.

• Updates for silverlight, word 2003, outlook 2003 andpublisher 2003 filter junk still fail to install. All the answers?

  Updates for silverlight, word 2003, outlook 2003 Junk mail filter, and publisher 2003 appear in the form of automatic updates, but still do not settle. All the answers?

  Re: Silverlight

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/silverlight-error-code-0x5df/891d1d79-f50d-4cc2-b879-1d749d8e30ab

  Re: Office updates (you forgot to mention why you couldn't install updates).

  Download the complete and even install (if necessary with the support of Office 2003 installation in the drive).

  or

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
  http://support.Microsoft.com/kb/2258121

• Failed to add constraint because the constraint that you add must be entirely contained in the upper Surface of the Inflation

  I have just created a base ellipse extrusion, press Select all and cannot add a constraint because of this error.  I do not understand how to fix it.

  Sounds like your second step 'Select all' is the origin of the problem.

  This example below, the use of cc2015.5 to drill a hole through an elliptical extrusion can help

  3D extrusion of ellipse

  

  selected option in the upper area

  

  Click on the existing limit stress then go to properties and add the constraint

  

  Constraint has been added

  

  Go to properties and set to the hole

  

  Result

  

  Dave

• Photoshop CS5 for Mac.  Is no longer able to open the program after reinstalling on MacBook Pro.  Download the message «end of file unexpected met»  Then get "failed to initialize Photoshop because the preferences file was invalid (it has been removed)." 

  Someone at - it advice on how to open Photoshop CS5 for Mac.  Is no longer able to open the program.  Just get the emblem of blue PS and the message "unable to load actions because an end of life unexpected has been met.  Could not initialize Photoshop because the preferences file was invalid (it has been deleted). "I tried to reinstall the program from the original disc.  Is this a problem with the operating system?  Thanks for any idea.

  Now try control-alt-shift key (Ctrl-alt-shift on Windows) and start Photoshop. An option button will open and opt for delete the settings file - see if that helps any.

  Terri

• Try to install Camera Raw 6.7 for an EosX Cannon, still fails.

  Hello

  I try to install the update to Camera Raw 6.7 for a Cannon EosX on a Mac, it still fails when installing saying that the administrator removes the update.  I logged into the administrator account on this computer and cannot figure out which prevents the installation of the crosspiece.

  The laptop is a Mac, using Potoshop CS5 10.8.5 OS.

  Anyone encountered this?  All the solutions out there?

  try a manual update, http://www.adobe.com/downloads/updates/

• HP printer device manager! Symbol, "failed to connect" Windows Sound - still Printer Works

  Every time you start, I hear the sound of the device "Windows failed to connect.  How can I get rid of this?

  I have a printer HP of J6480 with WIn 7.  Device Manager does not recognize the printer driver.

  In Device Manager, the printer appears with the! error symbol.  No other devices have an error symbol.  The HP Solution Center and the printer work again.

  (1) I tried install fresh of the current HP software full functionality.

  (2) I tried the HP uninstaller program, through all five uninstall programs twice.

  (3) I ran CCleaner to clear the registry problems.

  (4) I tried to delete the Device Manager "Officejet! Entry J6400 series.  The Solution and the printer Center then do not work.  Apparently, the Device Manager recognizes the printer but not the driver.  I have to go to 'Programs', 'HP', then 'Officejet J6400 Series' to reinstall the software.

  (5) I tried to get the Device Manager to recognize the software.  When I click on «!» OfficeJet 6400 series', I get the message "the drivers for this device are not installed (code 28).  If I then click on 'Update Driver' and select' Browse my computer for driver software"then click on"Browse "C:\Users\Myname\Downloads", where I have the Sofware HP 13.0 full feature software and basic print and Scan Driver files, he says "Windows cannot find driver software".   If I click on "Search automatically by the driver software", I get the same message.

  I would appreciate ideas!  Thank you!

  Friendlycomputr,

  OK, if a few things stood here:

  1 windows its "cannot connect device" sounds only with a direct connection, not a network connection which is what you have. (Ethernet)

  2. have you had any other device installed on this computer is more active?

  I would like you disconnect the Ethernet connection and go below:

  1. uninstalling the printer software

  2. make a restart on the computer, when it starts, do you hear the sound "device cannot connect?

  Let me know.

• Get the "Failed to connect to server" error after having my hosting of emails expire and reconnected. Using the latest version of Thunderbird.

  Hi, I am probably doing something really basic and easy to fix but facepalmingly pls have patience with this n00b...
  My emails with Crazy Domains Hosting has expired a couple of months, I've just managed to get it reconnected.
  When I open Thunderbird once again, I kept getting the error msg "Failed to connect to server".
  I checked all the settings for the account, they are all fine as far as I KNOW. Updated to the latest version of Thunderbird, tried to restart the program and doesn't have the obligatory IT Crowd "troid torning it and turn it on again", still get the same message.

  Plaaaaiiss... Halllp!

  Regardless of my fault for typing. What is important is that there is nothing in the DNS or whois on the domain.

  Look at their own whois server it shows pending deletion, expired in April. http://www.crazydomains.com.au/WHOIS/littleredfoxdesign.com/#result

  Until these public information are corrected your not likely to be able to connect because Thunderbird can not find the server. There is no DNS records to point to it.

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• Utility of fingerprinting Toshiba - "Failed to connect to the sensor.

  Having a problem with the Toshiba fingerprint utility. The program works fine until I try to use any sort of firewall/antivirus program, even the built-in Windows Firewall: S the scanner still works fine for the boot time scanning, as well as for windows logonm but as soon as any kind of firewall/antivurus software loads up, it fails to connect on the sensor. I added the program to the lists allow but still nothing... So far I tried with AVG Internet Security, Outpost Security Suite and by default, the Windows Firewall. Windows Firewall turned on for awhile, I got when I bought the laptop and there was no problem.

  It's a Qosmio X 500 - 00 X, it uses the same installation of windows when I bought...

  See you soon!

  Hello

  Please update the software of fingerprint. You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try a different firewall and AntiVirus. I have good experiences with AntiVir and Kaspersky Security Suite.

• Drive not work in IE and saying failed to connect with fingerprint sensor

  Hi all

  I purchased a Qosmio x 500 10 t a couple of months back. For the first two weeks, I had no probs using the fingerprint reader to log on windows and connect to Web sites in Internet exploer.

  All of a sudden it would not work on any website that is stored. The Green banner was shown in the upper part of the site and asked finger drag, but nothing happened when I slipped. I rebooted and it worked again but not for long before failing. This time a restart didn't work so I deleted my fingerprints and Web sites and started from scratch. It worked for a few attempts before probs started. And to try to enter the utility of fingerprint it says the connection of sensor failure. So, I did a system restore. He worked for some time yet and then same probs. So I found the update utility software, uninstalled the old and put on the new. Even once worked for a couple of times then failed.

  I couldn't find anything about it is stuck in the registry but to be on the safe side I did a full system own return to the original using disks of backup configuration. Hey presto, I thought that he had worked. Everything goes ok for the first 24 hours and then same problems start to occur. Only this time it's also prompting me to register fingerprints even if I already have. And when I try to enter the utilioty it says cannot read the sensor again.

  The fingerprints for windows log still works as long as I do not close the utility of fingerprinting before stopping. If I quit the utility I can't reopen it as it says failed to connect to the sensor only. And then I have to uninstall and reinstall the utility software. Aty at the time where he occasionally works on sites stored Web, but most of the time it does nothing.

  Help, please. I have to return Toshiba laptop?

  Have you seen this FAQ?
  + Log on to websites with Authentec Fingerprint Software (TrueSuite) and Internet Explorer 8 +.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=62

  I recommend looking in the forum and read the HowTo and FAQ section in this forum
  Could still be interesting

• Profile of user failed to connect

  Profile of user failed to connect.  Paswor does not work.

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• failed to connect the user had not granted the type of logon required on this computer

  W2K, Win XP Home, Win XP Vista Pro and al

  Some win appear XP OS like win 2 k professional versions, others as XP Home appear as WP Pro builds.
  The integrated network has a combination of these BONES still bastard licensed and the subject of errors occur

  "failed to connect the user didn't would have been granted the type of logon required on this computer.

  What sets with that?

  Never had this problem until that Microslop mixing and matching the OS with no sense of compatibility problems started

  IS THERE ANOTHER OS THAT WORKS THERE... PLEASE EXPLAIN!

  Frustrated and angry consumers of products Microslop

  Dave R

  check out this link and see how it works for you.

  http://forums.techguy.org/networking/533210-solved-user-has-not-been.html

• FAILED TO CONNECT TO THE WINDOWS SERVICE (GROUP POLICY CUSTOMER SERVICE)

  Hi I have the same problem is started when I was looking for a driver for a usb camara the problem may be caused by a bad driver who does not belong...

  I am currently running my laptop on safe mode, so I can solve the problem. I use system restore and tried to solve some problems in the registry but still keep getting the pop up C:Windows\system32\Config\systemprofile\Desktop is not accessible
  I do not know completely what is the problem.
  I also have another pop up on the side saying "FAILED to CONNECT TO WINDOWS SERVICE (SERVICE to CUSTOMER GROUP POLICY)...".
  HELP PLZ

  Hi Jesse310,

   

  Welcome to Microsoft Answers Forums.

  • When you get this error message?
  • You are able to boot to the desktop?
  • What is the version of Windows installed on the computer?

  This can happen more often if the user account is corrupted or some missing files.

  First of all, I would say that run you a virus scan online on the computer to scan and remove infections of viruses or malware on the computer and check if it works.

  See the link below for the on-line virus scan and perform a full scan of service on the computer.

  http://OneCare.live.com/site/en-us/default.htm

  If you are unable to boot to the desktop in normal mode, I would say that you start the computer in safe mode with network and try the online scan.

  Steps to start in safe mode with networking

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

   

  Start your computer in safe mode

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If the step above does not resolve the question suggests that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.