BlackBerry Smartphones Blackberry constantly seems to transmit a signal

Similar Questions

• My printer quit 4500 print but seems to be the signal by computer, it sends just 3 sheets w

  My printer quit 4500 print but seems to be the signal by computer, it sends just 3 sheets with nothing on it.

  I also have a 7 hp windows computer.

  Shane Merci for your comments. On this printer, I worked all day. I have restored my computer, used unhide.exe and about 8 others

  solutions. I guess I learned a lesson. You asked if I tried a color image. The reason was that I couldn't believe that I was low on ink.

  It's a nice new printer and the computer, but the color cartridge was full b & w was empty. I didn't try the obvious.

  dodgeredd

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• BlackBerry Bold 9700 Smartphone freezes constantly

  My Bold 9700 keeps freezing on or has a clock turns around for which I have to remove the battery to fix the problem.
  PS please do not mention the fact that I might have too many apps installed because I did not, and even if I did, why it must be a problem? I have almost 20 apps on my iPhone and it never caused a problem wrt freezing or stalling.
  RIM really should up their game that Samsung and Apple will abandon them so far behind on the market that we can never catch up.

  CapeofStorms wrote:
  1 - v5.0.0.442 (Platform 5.1.0.121)

  Hmmm... Well, some carriers took your 9700 OS6, and others have newer versions of OS5. Up to 6 could be problematic for your situation since the OS itself is reported to take more space AppMemory, which would probably only worsen rather than your complaints help. In addition, your applications add-on may or may not be compatible with OS6... you need to check that. Finally, OS6 is a huge change from OS5... the interface, menus, and many other things are very very different... some people prefer to stay with what they are used.

  You can check your carrier and others, via the official download portal:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  Sorry, I don't know which carriers for you guide... I have no access to a list of carriers that support your 9700. I spot checked Orange Romania (since I happened to be there for another thread here) and they 5.0.0.586 (such as 6.0.0.461).

  It is quite possible that, at the level of your operating system, there is some sort of memory leak or something... that might be resolved by a more recent operating system level. Unfortunately, change log information is notoriously difficult to find.

  CapeofStorms wrote:
  2 - memory installed app 84.5 MB - (2 GB sd card)

  (FYI... the sd card, as well as the memory of the device, is unrelated to the amount of AppMemory available).

  If this amount remains relatively stable, there are a lot of AppMemory free to allow the smoothly. You might want to look at it over time, however, to see if perhaps there could be a leak memory somewhere... which, when it becomes too low, initiates the "self-protection" on the BB things which, from the point of view user interface appear exactly as you described.

  CapeofStorms wrote:
  3 - 20 minutes ago

  Oversight, over time, AppMemory. If it falls over time, then check out the possible situations. For example, make sure that you leave no running applications that you don't need... and you must close many of them very precisely in order to ensure that they stop correctly. The 'return' or 'red' keys let the app to decide... and many decide to keep the resident. You can always check who is resident and exercise on the Ribbon AppSwitcher - the mandatory elements are Messages, BBM, browser, home and phone... everything is an application that has been added and be authorized to reside (perhaps in apps options), either simply not properly closed.

  All devices can also benefit from a clean reload of the OS from time to time. Like all devices computer, things get broken, lost, lost, etc. due to the imperfections (devices, designed and built by humans, are imperfect by definition). A clean reload of BONE tends to, well, clean things up.

  If you need assistance with the execution of these ideas, please let us know.

  See you soon!

• BlackBerry Smartphones Blackberry torch seems dead?

  Last week my torch blackberry 9810 crashed while I was not using, and I returned to find a red light flashing very slowly. Thinking that the battery was flat I left it charging, still nothing. So I'm left unplugged for a day and tried to load it again. This time, the charge indicator appeared in the middle of the screen and disappeared after 5 minutes. The phone has not started.

  After days of the trial, appeared at random is message on screen saying error 507 and asked me to reinstall the OS. Then I logged on to the computer and started the update, but he reached the reconnection to the JVM and has failed every time. The error never appeared again and the phone returns to his flashing red light.

  Is there any hope for him? What should I do?

  Thanks in advance!

  Try it with the battery removed.  When the load is initiated, reinsert the battery.  You also can experiement with expect from different points to reinsert the battery.  Often, sometimes just the right timing will allow the OS to be recharged in the device.  In addition, instead of simply double click on Loader.exe follow these steps:

  Open a command window by clicking Start > run and type 'CMD '.

  Type cd... and until you get to c:\

  Then type:

  CD Program files

  Common files CD

  CD research in motion

  CD apploader

  Make sure that the Desktop software is not running, then plug in the unit.

  Then type loader.exe /nojvm
  and try again the load.

• BlackBerry Smartphones download updates seem to take too much time

  I download updates for my Curve 9300,

  first of all why do download 659 modules which seems a lot?

  He reached 286 and stuck? What happens when I plug United Nations as reviews say it can restore my useless device? I'm 3 + hourrs and waiting?

  Yes, the upgrade process is not ideal.

  After three hours, I think that I unplug it and hope for the best. The process should make a backup first, so you should not lose any information from any front.

  Let us know if you need help.

• Network of Smartphones blackBerry speed seems slow

  A Pearl 8130 (ver 4.5) for a month now and with No downloading(d/l) additional files, ringtones, etc of the original configuration. The first two weeks, signals and Internet requests are strong and fast enough. Now the same office (x) the signal is still strong, but the Internet homepage "asking speeds" seems to have slowed down a lot. 1xEV still shows on the display. Sometimes I "re-" the application and this seems to help some. Is it slow down normal to the Sprint 3 G network? Coverage maps see the 'good' for me. Any help or information appreciated.

  Edit above message:

  After talking to Sprint tech support, they said to remove the battery for a minute to replace and see what happens. After this, everything works fine now and my free memory have increased to 8 MB. Apparently, from time to time, it's a good idea to do so, especially if things seem to s-l-o-w and nothing else on the phone has changed.

  Hope this helps others.

• BlackBerry Smartphones that I seem to have bricked my Tour

  I have

  I think I made something in my turn, that caused the DM to do not be able to recognize.  I have a screenshot of the error, I included it above.

  I tried to do a reload of DM that seemed to work but the device cannot yet be found.  I'ave also charged some of my programs by clicking on the file "loader.exe" running.

  Any advice would be helpful.

  Thank you

  He did if I ran the .exe, DM file he didn t.

  The problem is not resolved, in another forum, it has been suggested that I have to remove the battery and run the update.  It worked, I still don't know why this has happened, but it seems to be OK now.  I worked on restoring the phone to its old self.  Although process when all third party applications must be reinstalled individually.  Now, I'm looking for a backup application that backs up everything including third party applications, what a pain it is.

  Thanks for responding.

• My Network blackBerry smartphones is constantly changing! Help, please!

  From 3 to 4 weeks, my phone will pass between the networks.  It will show GSM, edge, EDGE, 3G, 3g and sometimes even SOS.  I have no idea why he keeps it doing.  And it switches between each of the connections within minutes of each other.  Also does it only when I'm at home and on the floor of my house.  I called AT & T, my provider, and they did a kind of software change, my phone to connect to a different and closer Tower, but I still have the same problem.

  Someone at - it ideas?

  Thank you very much!

  What version of the operating system you have installed? Check under Options | Everything. If it is less than 4.6.0.297, Itry retry the upgrade to this version. That and the previous version added a choice for network selection mode.

  If you do not have this version, go in manage connections | Try to change your mode of 2G and 3G network and mobile network options. See if that makes a difference

• Portal JIRA blackBerry 10 seems to have disappeared

  It may be just a small problem, but any attempt to see the results now existing JIRAs into a 404 not found error. I checked with another dev in another province in the Canada, and they see the same thing. Not sure if it's just local to the Canada or if it is a thing in the world. BlackBerry was not fixing JIRAs for quite a while, then, perhaps, they decided to stop paying Atlassian for the service. If so, it's very frustrating. Although there was little hope JIRAs would be ever fixed, it was useful to be able to see if someone else runs the same bugs you and if there is no work around.

  If she has been "retired", it would be nice if BlackBerry had warned us all.

  Yes, BlackBerry Issue Tracker has been removed.  He was running a very old version of JIRA that was is no longer supported.  He was also very personal, which meant that a simple upgrade to a newer version of JIRA was not possible.  Very few new issues were recorded and it is more synchronized with the internal systems (for updates).  The decision was made to give up using it because it is no longer available the benefits only once.  In its current state, it was not much more than a bulletin board.

  That being said, all URLS that went to Issue Tracker should redirect to a page explaining alternative methods to report issues.  It shouldn't be 404 errors and I'm looking into why this isn't the case.  Developer related bugs can be reported using the forums and looking at us and climbing those arriving.

• Passport for blackBerry emails seem to disappear from my Blackberry passport after 15 minutes

  Please can someone help - all of a sudden, after all being fine for 2 months, my mails suddenly began to disappear, the same day as they arrived. All the advice step by step what to do to stop this greatly appreciated.

  Also, the contacts that I know, I put in my phone disappear too - what happens? Help!

  Thank you very much for your help, I will try and set up the mixture between my pc, mac & passport... may be speaking to again you in this case!

  Thanks again

• Pavilion 500-242ea: x 5 component the Fans Running constantly - seems more noisy for me - is that true?

  Hello

  Have had a unit of 500-242ea Office Pavilion, a little more than 12 months now, but I remember it is much quieter when I bought it

  Currently, all 5 fans operate constantly, which seems to be at full speed.  Is this good?  I'm not crazy, I know fans need to run components cool but I didn't know that all 5 had to operate at this speed!

  Notes: I'm not a gamer and do not exploit several programs at the same time, all that often, so do not insist on CPU etc.  The unit is clean / dust-free, inside and outside, and there is no problem of heat sink, I noticed

  Graphics card was recently replaced (due to grinding noise on start up) under warranty but replacement is not stronger than the previous unit

  Can anyone suggest, if it is possible to adjust, reset or control the fans via BIOS or if there is another way to reduce this noise nuisance?

  Thanks for the advice offered

  Hello

  Being a "student of honour here, I don't know how to tag my question as"Resolved."

  In any case, for someone who is having a noisy fan problem, you can give what I've done, a go

  1 / restart PC Desktop, tapping f10 key as it works to begin with, it penetrates into the BIOS menu

  2 / take a look at all the options related to food.  I took a look at the "Thermal" CPU, but please note that I have not made no changes to anything!  I have not noticed, any menu for changing fan speeds

  3 / choose option "exit without saving the changes.

  If you're lucky, as I now have a silent computer near

  Aaaah... happiness

• BlackBerry Z10 Z10 and the carrier Signal strength

  I don't know if this is related to the question of appeals Z10 has dropped, but I noticed that my carrier signal strength jumps from full bars to (say) 2 shelves for the big X red for no reason my phone is just sitting there.

  This may be related, but I also calls recently, and my quality of phone (although normally I would say great) was virtually zero as if I had to drive into a tunnel (you know, that jerky digitized sound).  Actually, I was sitting in front of one of my rounds of carriers.

  I would appreciate ideas... I'm on OS 10.1.0.1720 official on Telus.

  I have the same problem on Rogers and my father done to MTS. We are in Manitoba. Very strange how it fluctuates constantly. Found in Toronto it was stable, and the LTE with Rogers.

• simple way to transmit a signal between independent screw

  Implementation: I use a VI (updated version at http://www.ni.com/example/29872/en/) to output voltage signal to a speaker using the NI 9263 module. This VI works independently and simply allows me to adjust the amplitude and frequency that I acquire data. I then use a second VI to read/save data to an array of 8 pressure sensors, it is a standard VI that uses DAQmx components to enjoy two modules NI 9215.

  Question: Is there a way to move from the waveform of the signal generating VI to my VI of data acquisition? I want to save my data for treatment later on the long side. I could of course T-off, the voltage signal and send it back in the input module, but this seems to be a stupid solution. Thoughts? Simple solution wins!

  I can gladly get screenshots if wanted, but our lab PC is disconnected, so I have not yet taken. These are really codes before simple right now, I'm hoping to make minimal changes.

  (I know I have not all the posts here, but I'll give Kudos answer / Select)

  EDIT: even though you might just suggest functions/methods to review, it would be useful. I feel that I do not use the correct vocabulary in my research.

  VItan wrote:

  It's actually a one-to-many consumer-producer:

  Producer:

  Logic of generation of waveforms

  Consumers:

  Hardware driver

  Logging

  A generator-> material and Logger - true...

  But just a queue will do - simply for transmitting the data to the other vi (material can be connected directly) so just a queue of one by one.

  Event data is an interesting variation on this subject. Not tried between the front.

  

  EDIT - actually just re-read your message. Thought you said the line would not work, but I think I misread that.