Satellite A100-1AI watch CD player but Device Manager shows the DVD player

Similar Questions

• Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

  I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

  Hey JP317!

  If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

  So check the site Web of Intel for an update and you should also find Windows 7 drivers.

  If you have any other questions, please let us know!

• Satellite A100-998: several question mark in Device Manager

  Hello.

  I hope someone can help me. I recently bought a 2nd hand A100-998. When I boot it I have several '' mark points '' on various points: Ethernet controller, mass storage controller, network controller, sm bus controller and video controller (vga compatiable).

  I also have a message once the machine starts who says: the ATI Control Panel could not initialize because no ATI driver is installed, or the ATI driver does not work correctly. The ATI Control Panel will now stop.

  The computer also says its new hardware found (all the controller ethernet etc.) but
  I have no disc driver for these and can't find.

  I think the problem is that my restore disk on a windows XP Home Edition, and it seems that the system must be windows media edition. Y at - there someone out there who knows what I can do or any other solution to solve this problem.

  Thank you.

  Hi David

  All this yellow question mark appear due to lack and not installed drivers.
  You must install all the drivers compatible and available, and you will get rid of all these issues.

  On the Toshiba driver page, you will find all drivers XP for PSAA9E A100. Your A100-998 is one of the PSAA9E series then visit the page of European driver of Toshiba and download all the available drivers and tools.

  In addition, you should take a look in the installation instructions document. This document tells you the right installation order!
  The order of installation of good pilots is important and necessary.

  Good luck

• Satellite L300-170 - no network card in Device Manager

  Hello

  I use Toshiba Satellite L300-170.
  I install Windows 7 and realized that my LAN connection does not work.

  In Device Manager, I have only the wireless network adapter which works fine.
  My question is: is - nothing I can install LAN adapter manually and then install driver although my OS does not recognize LAN adapter?

  Hi mate

  First of all, please set the BIOS to default settings.
  Then save changes, connect the LAN cable to the LAN port and reboot the device.
  After that please check in Device Manager if the LAN Controller would appear once again.

  AFAIK some newer laptops supports a new energy saving feature.
  The LAN card is active and appears in Device Manager only if the LAN cable would be connected!

  Welcome them

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• Device Manager shows two different processors on Satellite P200 - 1 K 9

  Hello
  I just bought P200 - 1 K 9 and spotted (Vista 32-bit) Device Manager shows two different processors under the section of processors:

  Intel Core 2 Duo CPU T7300 @ 2.00GHz
  Intel Core 2 Duo T7700 @ 2.40 GHz CPU

  I expected to see the two excatly the same processors here.

  Vista recognizes in general CPU core 2 duo 2.4 GHz, BIOS too.
  What is on the Device Manager?

  Is there something wrong with the CPU? Should I return it better?
  Would you please check your processor in Device Manager (start-> right click on computer-> select Properties-> Device Manager) and let me know what you have?

  I'll start some live linux CD and check there too.

  Thank you
  Miroslaw

  Hi mate,

  the you´ve got problem is not a problem. It s just a simple bug in the Vista Device Manager and hardware abstraction layer.
  Follow these steps:
  Remove the CPU from the Device Manager (uninstall just like any other device) and then restart windows. The processor will be indicated correctly next time you reboot the system.

  Welcome them

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• Device Manager shows no device, is empty

  My 8200 Dell under XP Professional SP3 shows not all devices in Device Manager.  I think that it started very recently when I was installing TM Internet Security after the removal of Norton Anti Virus 2009.  Eventually after using Norton Removal Tool. It doesn't show the devices safe.  Plug and Play is on.  I recently installed an old HP DeskJet 820Cse printer using existing drivers.  I do not think that article 953979 applies since it just (seem), took place but it seems to fit the description.  Any help is appreciated.

  There is a Microsoft 953979 patch that works, but it didn't on mine, I then found this articale and followed the instructions and it worked.

  (1) logged as an administrator;
  (2) Regedit > HKLM\SYSTEM\CURRENTCONTROLSET\ENUM.
  (3) right clicked Enum and gives right to the system and administrators full control.
  (4) clicked the button Options at the bottom of the window.
  (5) on the Advanced window checked 'reset permissions on all child objects... ". »
  (6) the deleted Enum key. Error message: error while deleting key. I had to remove this key twice because initially, it appeared the remains of Enum key. After that, the locked ENUM\ROOT\LEGACY_SSDPSRV who already had a lot of weird symbols example $% &' () * +-, etc., now gone. Registry shows an own ENUM\ROOT subkey.
  (7) PC rebooted and back connected to Windows;
  (8) window of the Device Manager showed some yellow exclamation not to mention that some devices not recognized, then refreshed a few times showing successively less then not many of these features.
  (9) PC rebooted again;
  (10) message screen saying according to Windows has finished installing new devices, and the computer must be restarted before the new settings take effect.
  11) Yes to restart the computer

  Now the Device Manager window is full and all devices running again!

  This solution works for my situation. I hope this helps someone.

• Change the data of payment in iClould... but do not show the storage I want to buy...

  Recently my account iclould miss his payment to make, and I add another mode of payment by credit card. The monthly amount of iclould has benn already debited from the credit card... but do not show the storage that I would buy for...

  < image published personal information >

  Low contact left link.

  iCloud

• When I download something at this time, it displays the logo of microsoft word, but does not show the picture logo .so I can do now

  When I download an image with Firefox than time, it shows only the Microsoft word logo but do not show the logo of the photo, so when I open the download file it show only the Microsoft word file. and I don't see my folder. but now what can I do?...

  What file extension, these files get when save you them?

  If they do not have a file extension valid for a picture as a .jpg or .png then try to rename the files and give them an extension of .jpg file to see if that helps.
  
  If Windows hides the file extension and then use quotes ("image.jpg") around the name.
  
  You can check the type of file using the context menu > properties.

• I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

  original title: ACTIVATION of VISTA
  I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

  You simply have to use telephone Activation...

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Director of office of blackBerry Smartphones no connection BB recognition despite Device Manager recognizing the BB!

  I'm turning crazy connection.

  I installed desktop manager 4.6 provided on the CD, as the user guide says. I connected the cable between my BB 8220 pearl.

  The BB asks me if I want to turn Mode mass storage and I clicked 'YES '.

  Explorer Windows allows me to view the contents of the phone.

  BB Device Manager tells me that "" USB - PIN: xxxx is connected ".

  YET in the Desktop Manager software on the upper left corner, it says 'Disconnect' and on the lower left corner, it says: "Device Connected (PIN): No.

  Does anyone know why the BB device manager says the BB is connected by software office says the opposite?

  I have tried everything to uninstall for re - install desktop Manager and also pass the phone power on and off.

  Help, please! Someone!

  Hi and welcome to the Forums!

  See this KB for assistance troubleshooting:

  • KB02640 Troubleshooting USB connections
    KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    KB00019 PIN code not displayed in BlackBerry Desktop Redirector

  I hope that something will be useful.

• When I try to refresh the Web page it say upload in progress, but does not show the State

  When I try to refresh the Web page it say ongoing upload, but does not show the State, so I don't want to close the browser, but I want to know how much longer it will take to complete the download.

  Hi Dana

  When you download to revel in adoberevel.com, you will not get a time remaining indicator. If please do not close the browser or your download will be completed. Download time is dependent on the type and the size of the file and your connection speed.

  Guinot

• Apps installed from the disc, but Application Manager shows them as not installed

  I have all the Creative Suite (master) applications installed from the disc, but Application Manager shows them as not installed. Why?

  Hi Dv8kiwi,

  I was able to recreate the behavior and am reported for designers of products, thanks for posting on the question.

  -Dave

• Satellite A100-991 - cannot boot from USB device

  My Satellite A100-991 (MS Windows XP MCE, SP3) does not start from a USB key or USB hard drive. The same USB devices are bootable if they are connected to a desktop computer or a laptop from other manufacturers. I put the USB as the first boot device and use an image "Bart PE" on my USB device.

  In fact, I have installed 2.10 Phoenix Bios version and I wonder if I could update the BIOS by using the 'sa105v21.exe' program and that this would resolve the startup problem.

  Hello

  Have you tested different USB keys? I think that your current USB key is not compatible
  Also test the USB to different USB ports. A port may be defective for the computer to start t with him.

  Theoretically, you can try upgrading the BIOS but don t forget s a bit more risky and it should be the last step.
  Prior to this, load default settings in the BIOS and check if you can boot from USB.