BlackBerry Smartphones clerical error: does not recognize internet connection

Similar Questions

• BlackBerry Smartphones my Storm does not recognize the SD card

  Hi everyone, I just got the BB 9530 Tower in tampa, Florida, and now I have my home land. So my BB cannot recognize the SD card, even if I try to ROM and ROM, and I can read my SD of the card reader for PC. I had another SD card is used as a good of an another BB and connect on the phone 9530.My BB still does not recognize SD card with notify optional---> MEMORY "A MEDIA CARD IS NOT CURRENTLY INSERTED in the DEVICE. I activate all the card carrier, Mass storage Mode supports, enable Auto Mass... is running

  I don't know what I'm doing now, and I think my DD not damage

  Thanks for the support

  My PIN: 304C26D3

  IMEI: 359483.02.293455.3

  Cool!
  I'm glad that you fixed it.
  Please solve the thread so that others can find your answer faster.
  Thank you

  Bifocals

• BlackBerry Smartphones windows 7 does not recognize the device

  I was connected my 8330 for a desktop XP for a long time.  The sw of the device is v4.5.0.175.  I recently got a new Lenovo T410 laptop, running Windows 7.  I downloaded the software (version 5.0.1) DM and checked my camera SW is updated, but the laptop is still not recognize that the device is connected (via USB).  I tried all ports USB on the laptop and also followed all the steps detailed in KB13146, with no luck.  I find nothing in any of the forums that refer to Windows 7.  Can anyone help solve this problem?

  Hi and welcome to the Forums!

  Here is the list of troubleshooting atricles... I hope that something will be useful:

  http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  KB02640 Troubleshooting USB connections
  KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  KB01451 How to enable Sync advanced logging if a wired synchronization fails
  KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. I can attest that DTM does not indeed a BB under Win7... mine is exactly so.

  I hope that something it is useful!

  See you soon!

• BlackBerry Smartphones my PC does NOT recognize my Blackberry Curve 8330 at all!

  I'm at the end of the roll, trying to figure out this question. My Blackberry Curve 8330 just will be not recognized my Vista PC running at all.

  Here's what I know:

  -My phone was purchased new may 9. It's the Verizon service, so what matters.

  -My phone has a microSD inside memory card.

  -(Home and car chargers) USB charge cords work to charge my phone. I see the icon taken directly to the left of the battery and it stays there until I have unplug the unit.

  -I tried different USB cords to connect my phone to the PC and nothing works. When I plug in, the phone displays the icon card very briefly and then disappears. Nothing appears in the device for the USB slots Manager, either.

  -All USB slots are the same, even those at the back of the computer.

  -Other USB devices (iPod, for example) work very well.

  -Ce How - to guide: http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...

  I uninstalled Desktop Manager and installed the USB/Modem drivers (as it says). Those that I have used is worm. 4.7. still nothing. I restarted the computer and still nothing. This solved nothing. (Even used such 4.5 recommended in this thread, and it does not, either.)

  What exactly should I do to get my PC recognise the Blackberry? I can't do some of the things I want to do until this issue is resolved. Because the USB port works to load, then I think that it must be my computer, but where the conflict is and how to fix it, I don't know.

  Any help would be appreciated. Thank you!

  Believe it or not, this problem has been resolved by the simplest of ways - simple up to what I feel embarrassed!

  Know how they say when he's broke to book on I have and it works? Well I hate to be energetic on electronics, but I hit just the USB cable in the port of the BB curve. Then it started working like a charm.

  All that stress and all I had to do was show some muscle.

  After that it would not recognize the device in Windows as a mass storage device. This has been fixed by the backup of the memory card on the PC to save my pictures then insert into the BB and put in shape. At that time I also found instructions online to change the drive letter of the mass of the F: BB storage device a letter less used to resolve a conflict.

  My BB Curve is perfect now and all we needed was the strength to fix. Again, I can't wait to beat him and mistreating my electronics but sometimes it works!

  In conclusion, please don't make me feel too embarrassed lol.

• BlackBerry Smartphones Media Manager does not recognize the Media card

  Installed the media 2G card.  Card is able to format and presents itself as 1.8 GB.  With mass storage, office software (Roxio media manager) does not show - memory card from the device.  In mass storage mode (which, according to the manual means the acts of the device as a USB storage device), PC sees the device, but does not not the files copied to it.  Has spent about 2 hours with the technical support of Verizon... they are puzzled.

  I found a workaround for the music files on the card.  I removed from the Blackberry and installed in an SD adapter full-size and there in a USB key with a SD slot.  My computer has seen the media card (embedded in the USB device) and I flew over songs in the repertoire of music on the media card, put it back into my phone and viola... the music file was there!

• BlackBerry Smartphones Desktop Manager does not recognize Blackberry 9650

  
  

  Hello Hmend99,

  I'm here to try to help or at least guide you on common sense.

  because something similar happened to me and I am sure I know

  What is the problem.

  This may be due to the fact possible that the Mac where is your blackberry

  undetected can run on 64-BIT KERNEL mode which

  BLACKBERRY STILL NOT OFFERED to SUPPORT / DRIVERS FOR.

   They know this problem for months and months and until now

  they don't seem to really care about their customers or to offer

  a stable only 32 & 64 bit driver for mac, instead, they just said

  clients (people like you and like me know this kind of questions,

  and who expect to have our appliances working like it should and not to

  have to deal with the BS like that, because we spent a lot of hard-earned

  money for something we thought would work without problem

  was available and could easily have gone because if something we

  knew would happen this kind of things, because Blackberry is not the

  alone on the smartphone market, but we just thought was reliable).

  to follow this LAME SOLUTION, which Im sure could help you, but

  is certainly not a solution:

  A LAME on BLACKBERRY KNOWLEDGE BASE SOLUTION.

  And here I quote for you:

  BLACKBERRY KNOWLEDGE BASE

  ARTICLE KB19728

  
  

• BlackBerry Smartphones multimedia app does not recognize MP3s update on my 4 GB SDHC card

  I loaded a few songs on the 1 GB original SD card that came with my 8330 and they appeared in the media application as expected.  So I pulled out the card of 1 GB and inserted an SDHC card 4 GB, responsible for a lot of music using Windows Media Player, and Blackberry media application always displays the initial batch of music.

  By clicking on one of the songs that are really on the map is nothing (as expected), but the song won't go away in the application of media and the new songs loaded on the card don't appear at all in the media application.

  with your Blackberry on, remove the battery for a minute. Plug it back. Wait 5 minutes for the Blackberry to emerge.
  go to the multimedia application. Wait for the Blackberry make its indexing (may vary... a few minutes to a few hours).

  then it's okay!
  (the process is longer if you put a lot a lot of new songs)

• BlackBerry Smartphones Windows XP does not recognize the reader of BB

  I installed the BB Device Manager and its 'connected '.

  However, when I open windows Explorer, it shows 2 drives E: and G: and when I click on it it says "insert disc". I can't copy all of the files for them.
  Thanks, Wayne

  Hello and welcome!

  E and G drives are new since the addition of the storm in your system? And they do not exist when the storm is not connected? Check on the storm (Options > memory) to be sure, this mass storage Mode is active and auto-permis. Restart the PC (and possibly the storm). Plug back in and see if it clears.

• BlackBerry 8830 smartphones & Desktop Manager does not recognize Outlook Express 2000, cannot sync

  I just installed Desktop Manager 5.0 and connected to my BB 8830.  I use Outlook Express 2000 for the calendar and I want to sync it with my BB 8330.  However, in Desktop Manager under Sync / Config / select the device for the calendar, the only choices are Yahoo and text import/export.  Of course, it does not recognize Outlook Express 2000 as a calendar program.  Does anyone have a solution?

  I bought this 8830 mainly to sync its calendar with my Outlook Express calendar.  If this does not work, then I'll go back to my cell phone operator.

  I installed Desktop Manager 4.1 and it works now.  Be aware with this version, once you connect your BB to your computer, unless you go through the Wizard Windows Found New Hardware, Desktop Manager does not recognize the connection with your BB and your computer (I don't have to do with version 5.0).

  RIM should be more attentive to people with a recent phone, but still using an earlier version of Microsoft Outlook / office.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• PCMCIA card does not recognize the connection to the local network on Satellite Pro 4340

  Hello world

  I have 2 Satellite Pro 4340, running Win2K, SP4. I bought a card PCMCIA 10 / 100MB of Ultron (more or less no name :-))

  When you insert the card, Win2k recognizes the card, but when the I plug the network cable, it does not recognize the connection. Cable is fine. It seems there is no power on the PCMCIA card. I read on some forums that there is a problem with the Topic100 Card Bus driver and voltage. I see that many people have the problem but not where to find the driver for the problem :-/ I couldn't find a driver on toshiba support site. A

  ll have an idea, or better a link where I can download this driver? Any help is appreciated and thanks in advance for your help, support and answers.
  Corey

  If this card needs a driver you will not find it on the download page of manufacturer of portable. You must check the card producer site.

  As you know in the world of computers, it has set different standards. Produced very often cheap are not designed for these standards, and you can have different problems. I recommend you to use high quality products.

• BlackBerry Smartphones Blackberry Storm my computer does not recognize my PIN code

  My computer does not recognize my Blackberry Storm when it is connected. Recently, I've updated the software on my phone to 4.7. The desktop software was still in 4.3. On Sunday, I connected the phone to my computer, and it was the beginning of my question. I uninstalled the software from my PC. Then I reinstalled the software updated since the BB site. But I still have the same question. I see an icon at the bottom right of my window that says: "Device disconnected", while in the box PIN number it says, 'NONE '. I don't know if the problem is with the USB cable. When it is connected to my phone, the phone is in charging mode.

  Any advice on what to do?

  jbriones wrote:

  My computer does not recognize my Blackberry Storm when it is connected. Recently, I've updated the software on my phone to 4.7. The desktop software was still in 4.3. On Sunday, I connected the phone to my computer, and it was the beginning of my question. I uninstalled the software from my PC. Then I reinstalled the software updated since the BB site. But I still have the same question. I see an icon at the bottom right of my window that says: "Device disconnected", while in the box PIN number it says, 'NONE '. I don't know if the problem is with the USB cable. When it is connected to my phone, the phone is in charging mode.

  Any advice on what to do?

  Most of the time a simple battery pull will correct this problem.

  Try to do a battery pull... Remove the battery with device 'ON' wait 20-30 seconds and replace the battery, wait for the device to restart (reboot may take up to 2 minuets)

  Mine will also do what you explain and a battery pull will clear up right ir.

• BlackBerry Smartphones Pocket Mac will not recognize Storm

  Hey guys. I installed Pocket mac on my macbook pro, but it will not sync with my storm. I installed the program with updates several times with the help of the other posts, but nothing seems to work. When I open the program, it does not recognize that I have my phone on. Yet, I am able to access the files on my phone from the finder. When I try to sync it gives me an error message saying "unable to connect to BlackBerry (error 1); jump. "Nobody knows how to solve this problem? I have been going at it for hours and I'm ready for something to work. Thank you!

  Well... I finally got to work after 6 hours. Laughing out loud. I made the mistake of amateur drag sync media in the trash rather than download it again to uninstall. Once I did, it worked fine.

• Cannot connect blackBerry smartphones... will not recognize

  I'm in a situation little.

  I have a new Curve 8330 and 3 computers can not recognize the device.

  1 pc to 2 macs.

  PC

  1. make sure the usb cables were not defective... used on multiple devices without problem.

  2. turned "on" and "invite" function to the "auto enable mass storage" just to see if that makes a diff.

  3. installed/uninstalled the BB DTM 4.5.

  4. connected directly to the machine, not a usb hub

  Mac

  1. make sure the usb cables were not defective... used on multiple devices without problem.

  2 meet all the requirements of software for my Mac

  3. installed/uninstalled the BB DTM 1.0.2.

  4. connected directly to the machine, not a usb hub

  Is there something that I am missing on my blackberry that does not allow this connection?

  TIA

  Thanks for the help everyone.  I am pleased to announce that a solution has been found...

  The darn on my phone USB pins were bent... not allowing a correct connection.

  Everything is running now.  Thank you

• BlackBerry Smartphones voice dialing does not work

  I crossed the figure set up the framework of the process. Then I tried to use voice dialing. He told me to say a command... I said call Ronda... it does not recognize what I am saying. I do not have a lisp or speech disorder and I speak clearly. Anyone have any ideas? In addition, is it suppose to work with sending text messages or is this a situation where I have to buy an app? All those that are free? And Yes, I tried vlingo, but it is not compatible with the storm n.

  To be sure, you will have to wait for the 'tones' prompt before speaking.  You don't say what operating system you are using, but I'm guessing that it est.75 or earlier.

  It is something that has been significantly improved dans.85.

  Also, during initialization of the application of the voice dialing, noise tends to 'confuse '...

  -----------------------

  If I or someone else can help you in this forum, please click the button "Bravo" in the post that you found it useful...