BlackBerry smartphones need help to get my 9800 Smartphone will start normally

Similar Questions

• Need help to get my mouse recognized, all started after the installation of the center of the keyboard and mouse

  Original title: Microsoft mouse and keyboard Center

  Hello

  I'm sure this question has been asked and answered before.
  But I just bought a mouse Microsoft Sculpt comfort, downloaded and installed M and K Center. But it does not recognize my mouse, I plugged the mouse to my laptop until I downloaded M and K Center and it worked fine, but all I want to do is program the side button.
  I use a Lenovo ThinkPad X 61 with the latest drivers for Bluetooth and Win 7 Pro.
  Is there something I need to do to get my mouse to be recognized by the centre of keyboard and mouse?
  M

  Hi Matt,

  Please write to us.

  I recommend you to uninstall the drivers of mouse from the Device Manager, then use this link http://www.microsoft.com/hardware/en-us/p/sculpt-comfort-mouse#support to install the drivers. Please select the operating system and the correct version before installing.

  Same thing applies to the mouse and keyboard Centre has as well, use the same link to install the updated drivers after you uninstall from the control panel.

  Nice day!

• I need help I get error 6 installation program and creative cloud 1 error.

  I need help I get error 6 installation program and creative cloud 1 error.

  Code 1 https://forums.adobe.com/thread/1434528

  6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code

• Need help to get cc to work again on my desk, I move something and he couldn't get off work. Thank you

  Need help with getting creative to work cloud

  Launch the Office CC (applications tab) and try to go into preferences and exit - click the settings (gear icon), and then connect again.

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• BlackBerry Q10 need help with putting in place an E-Mail on my BlackBerry Q - 10

  This is my first cell phone 'no basis', so I'm fighting in the implementation (there are some things that just are not covered at all in online user manual). The Q-10 apparently BlackBerry not the screen full of 'dial' e-mail unless your e-mail account is configured. The e-mail account, I have, what I have on my desktop computer; and because I'm so, so many emails without importance on it every day, I won't be getting all these emails on my cell phone (but I "don't" want to access on my cell for ALL options and electronic screens). Is there a way I can use my existing desktop computer e-mail address to set up the e-mail account on my Q-10 of BlackBerry, but somehow turn at 'incoming' e-mail on mobile phone off completely (so I only get emails on my computer)? In addition, which means when he asks if I want to "synchronize" my emails? Any help would be greatly appreciated!

  Remember, look up if you don't know and ask if you need help.

  See https://support.tigertech.net/outlook-express-lmos and ignore references Tiger Technologies. Set the time to keep on what you think appropriate. You can always change more or less to find the optimal length.

  Please publish. I can tell you that I am not alone in wanting to allows you to get the most out of your BlackBerry.

• Need help to get the right start!

  Hello

  I have 'given', back to January 1 of this year so far. I am looking for a way to get this info easily and my final result, will be a monthly comparison of the way in which all of my products (9 items) Farouk against each other.

  My products are:

  Plan A - 3 Plans - 1 month subscription $11.00

  -6 month subscription $16.00

  -12 month subscription $21.00

  Plan B - 3 Plans - 1 month membership $10.00

  -6 month subscription $15.00

  -12 months membership $ 20.00

  Plan C - 3 Plans - 1 month subscription $9.99

  -6 month subscription $19.99

  -12 month subscription $29.99

  I'm only interested in the amounts that each plan has generated in a month. I have no need of a customer Base. Since I'm on a new learning curve, my biggest fear is that I begin my quest to wrong-foot!   If anyone can help me get started, it would be greatly appreciated...

  Thanks again

  Ron

  Please post an example of data by copying and pasting the table in this forum.  Please remove sensitive, personal or professional information.

• ENVY of HP dv6-7204AX: need help to get the BIOS image file (ROM or BIN) for HP ENVY dv6-7204AX

  Hello everyone, I really need someone who could help me get an image file (ROM or BIN) bios for my laptop HP dv6-7204AX ENVY.

  For some reason, after that cleaning my fan cpu and everything put back toghether I had accidentally damaged the bios, because the electric sock, that's what the tech guy said :-(

  My computer is now automatically power on whenever I plug the adapter and nothing start (only caps lock led flashing continuously1time and black screen)

  Thank you

  Hello kieuminhuy... I'm sorry that you are having this problem with your ENVY dv6!

  kieuminhuy, you can go to the page of downlopad 7200 WANT dv6 to download and run the SoftPAQ BIOS proper.  You do not have to run this SoftPAQ on the failed system - it should work on any system!  When you run the SoftPAQ, chose the option to copy the image file of the BIOS to another location (see below).

  I hope this helps!

  WARNING: I am an employee of HP, but I am not a spokesman for HP.

  • If you found this information useful, please take a moment to click on "accept as a Solution.
  • If you do not want to say thank you, please click the 'thumbs up' to give me congratulations!

  

• BlackBerry Q5 needing help, Q5 plays up

  I don't know what I did to my Q5

  but every time I hit something that will be a woman's voice saying 'touch message text' or 'world blackberry button' etc. of things like that and he isn't going anywhere, I don't know how to use it.

  about the screen is UN-clickable.

  need help, I tried to understand try it for 15 minutes, I can't do it, it makes me nutss

  Thank you.

  Is your screen reader enabled.

  Touch the button to power on three times quickly to turn it off.

  You should hear "screen reader turned off.

  Then, go to settings > accessibility > screen reader and disable competely.

• BlackBerry 10 need help: Configuration of Outlook Web Access 2010 in Z10

  Hello.

  Summer tinkering with my Z10 on how I can configure my email to work (by using OWA 2010) but my efforts were in vain.  The settings I used were the same settings I used in my Bold 9780 who works so I'm at a lost, why it can't work on my Z10.

  All the suggestions/advice/help will be welcomed with open arms

  Thanks in advance.

  See you soon!

  Mike

  Hello

  Please see this KB:

  • KB03133 How to integrate an email address to Microsoft Outlook Web Access on BlackBerry smartphone

  Especially the last comment at the bottom... it's probably the cause of your situation.

  Good luck!

• BlackBerry Z10, need help

  Hello

  About 2 years ago my Blackberry Curve got stolen. I had all my data saved on my Mac that I used the Balckberry Desktop Software for Mac at the time. I recently bought a Z10 and I read on how to transfer data from various devices, including older BBs in the Z10. Only problem is that the procedure requires that you plug the previous device I longer because it was stolen.

  I got a second phone to the moment where my BB has been stolen that I've used so far. He had more but not all of the data I had on my BB (mainly of contacts). However, I would now like to recover the contents of my previous BB and have been uploaded in the Z10.

  My question is how should I do?

  When you load., install and use the BlackBerry CONNECTION on your PC, connect your Z10 to the PC and connect with link. You will need to connect to your BlackBerryID Link.

  Link, you will find the RESTORE option on the left menu column.

  Click on that, and in the popup screen, you must click "restore from legacy device" and proceed from there.

  More detailed information can be found here: How to migrate data from a BlackBerry smartphone running BlackBerry Device Software 5.0 and superior to...

• Protect the blackBerry Q10 need help to fix my blackberry!

  Sorry but this is my first time that I have post in our forum so if I have nothing worng i ' m so sorry! "

  And my problem: i got a BBID and I change my device several times (peripheral exchange for a friend when they want) but now when I connect to my BBID on new device (10 BB) I can't active my blackberry Protect? Hungarian noise me with a Messenger that I have a lot of device in my BBID/BBprotect so I have led one or some device, but when I connect to blackberry protect. I led the last of them, but that messenger always noise me. So I need help to fix my BBID, because now in my bb protect I don't have any device, but I still have new journal to my BB cant protect. Hope someone can fix it or tell me how I can solve this problem by myself.

  Thanks for reading!

  My BBID is skeleton1775

  MOD Edit: Edited post to comply with the Community guidelines and the terms and Conditions of use

  Many users have solved the problem by removing the device to Protect and add it again. Looks like you've done that. I don't really know what else to do. You could try a security wipe.

• can not update; "" Windows or windows defender ' more and I lost my; "' help and support ' file system on startup. Need help to get all that, please.

  I can't update "windows" or "windows defender". Followed the steps described by Microsoft help, tried to download manually, have asked Microsoft to help (no response yet) these first two things didn't work. I even had something like; change setting.that message security came for "Windows update", I have change the security setting, did not just well, still nothing.
  Windows Defender gives me an error code that looks like this;
  Error Code 0 x 80070005
  That's all I can get, and it will not update.
  and on top of it, I've lost my "Microsoft Help and support (it) when I click Start and click Help and support, I get a (?) all help options or when I click on it nothing there is totally 'empty '.
  I have one more problem.
  I tried to defrag my computer, and I can't do it either. I get a grey screen and if I click on anylise or defragment, it does nothing, no error message or anything else. Tried to manually defragment Traore does not work, tried to load a defrag on the web program, wouldn't let me load it.
  Nobody knows what happens here? why I'm having these problems all of a sudden? I do nothing but send E-mails and read my emails and I do not browse the internet or enter sites that are safer. So, what can I do? How to make everything return to normal? can someone help me with this?
  Also let me tell you right now, I'm not an expert on how to do things on the computer, so I'm scitish when it receives or sounds complicated. I don't want to lose my entire system because of these unfortenate none of the work programmes.

  Hello shessy49, welcome.

  I would recommend that we run a SFC (System File Checker) first scan to see what he finds. Try this:

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  ---
  After the reboot
  ---

  1. click on START
  2. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  3. type "sfc/scannow" (without the quotes) and press enter

  If the question started very recently, you can try a system restore:

  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need HELP to get this shadow effect

  Hi all

  I need your advice. Sorry I don't know the name of this effect below therefore the scene I need help

  A man holds a flashlight illuminating a girl in the front (she is a bit away from him in an open field), now the shadow of another person walks between the torch and the girl. The shadow is being cast from left to the right end of the frame, falling on the girl, too, as it moves.

  How to achieve this effect in the aftermath.

  It may or may not be a question of amateur, but any help would be so useful.

  Please notify

  It is now much clearer. you need advice VFX before your shoot. You must have a shadow without the man, be there. I think you can go 2-way with this: shoot twice the place or go to the green screen approach. each with its own complexity and the advantages and disadvantages. I will describe the basic principles:

  Approach to location

  If you want to try to do on-site, you can:

  1. turn your scene with the man and shadow

  2. pull on the same stage without human and shadow

  3 mask man with the rotoscoping and tracking

  This might work if you have no movement in your scene. or if you have motion control of drilling that will exactly twice the same movement.

  The green screen approach

  your question - if you can touch a person out and make him a shadow on the floor - YES. It's the way I'm going to try to do - it's called a Shadow Catcher - a layer that only accepts your shadow. This might work with or without movement of the camera.

  Let's say you have this guy on green screen

  

  and you want to just its shadow on the background against

  

  Here are the steps:

  1 make the guy (layer locked) 3D and add a corresponding upstairs floor * in the actual shooting.

  floor - add you a solid, it make 3D, add the effect of grid and position it accordingly with a camera of 2 knot like that of setting

  

  2. Add a layer of light points and set the shadow, set the images captured in the shade and the soil layer to accept shadow - only and adjust the light

  

  Now you have this:

  

  3. check that everything is OK, now define the images captured in shadow - only

  

  Now you have just the shadow. You can adjust it to your taste with the darkness of the shadow and the diffusion in the properties of light spots

• Hello, I need help to get refund

  My case is 0215746807

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )