BlackBerry Smartphones POST UPDATE PROBLEM: calendar data saved in the file "pi". WTF? Help!

Similar Questions

• BlackBerry Smartphones Software Update problems.

  I upgraded the OS on my 8800 in v. 4.5 so that I could use BB Messenger.  But once the upgrade of the software, that I'm having this problem with my BB when I leave it idle for a few minutes, the screen goes white, and I get the hourglass turns again and again and it just restarted my BB.  And this will be repeated continually repeated.  If I use my BB, it does not go to white screen and restarts.  Not sure what the problem is.

  Now when I push the lock button on the side, he instead goes to the Push to Talk application.  Y at - it somewhere where I can put the lock back button to lock?

  This update has been a headache, and Messenger of BB not worth all these problems if I can not fix them.  Anyone know how to fix?  Or should I just go back to a lower version, if I can still do it.

  Thanks for any help.

  I don't know why I didn't do this earlier, but mention you the media card reminded me...

  Follow these steps:

  Read this on how to correct the media card (courtesy of John Clark, a different expertise here in the Forum):

  1. remove the card multimedia unit and put it in a card reader. This makes the rest of the process much faster. However, you can do it with the card in the camera.

  2 copy all the contents of the card on your PC.

  3. replace the card in the camera and go to Options > Media Card > Menu button > card. You wipe the card and reformat. (if using a card reader to remove the card and put it back in the drive).

  4. now copy backup ONLY in the media to the device. Don't copy back all the 'BBthumbs.dat' files or all system files. I went through the entire folder and delete all .dat files before copying the content of the music folder and the folders of photos to the device. The device will re-create these files. Also, I is not copy folder "current music" but rather just copied content and pasted into the folder \Blackberry\music of the card. Do this for each folder.

  5. Once finished put the card in the camera, and then try again the media App. He must walk to the music. If you have a lot of music can take 5-10 minutes. When scanning, you can open the music application and you should be able to see the songs move in the list when the device will navigate

  If after the transfer of all your files back, you still get a stuck scanning bar or device restarts so you have a file in conflict on the map. I saw video files to do this, but it could be a music file too or (less likely) an image file. Remove all the files you transferred and see if restarting to stop him. Then add each file one at a time to see if you can narrow the file which is the cause. When you have found the folder, and then you can refine to a particular file.

• To update blackBerry Smartphones or not up to date - that is the question...

  I'm really confused.  I just got a replacement Tour from Verizon.  On several occasions, when I am connected to Desktop Manager v5, a list of the updates appeared.  However, I didn't do the updates at this time. Now, when I log in, I get the message that I don't need updates.  The version on this phone is v4.7.1.40 (Platform 4.1.0.40).  Should I update?  If so, what is the best method to do so - since the Verizon site or the Blackberry site?  I'm a bit wary since the last time I did the update of the os, I almost lost everything on my phone.  So, I hope I have the last version/patch, etc...

  Also, I have internet download manager, which includes my downloads.  Is that going to be a problem - not updated must be done via the Desktop Manager software?

  Thank you.

  Liz aka tilly

  Bifocals,

  You have been very helpful once again.  I does not level up to what Verizon offers it or I'm having a problem making do if necessary.  Thanks for the useful JL-CMDR link - I'll upload that I do an upgrade my computer in the case.

  I am a mental health professional and that you accept that Hamlet would be much better with the Blackberry - it's better than antidepressants.

  Liz

• BlackBerry Smartphones Software Update problem

  My wife has a 8310 used to be connected to its corporate enterprise server.  She is no longer with the company.  We had his service changed to ATT normal blackberry internet service.  When we tried to update its software online, we got the message that it could not update due to the fact that it was linked to a corporate server.  What do we have to do to reconfigure his device works as a standard service on 8310 normal?  Thank you.

  Welcome to the boards tkincer. Seems that the device still has a policy on this. Check by going to Options | Security options | General settings. In "IT policy name" see if you have anything that is listed. If you do then that means the political former employer are still on the phone. There is a way to remove it, but in doing so, all data will be erased from the device. If the device was already cleared, then you can just pass by following the steps in the link below. If you want to save the data on the phone first, you can use the Desktop to backup and restore functionality. After the device is erased so you can restore data back on your phone

  How to remove political

  http://www.BlackBerryFAQ.com/index.php/Remove_IT_Policy

• BlackBerry Smartphones Application Update gel & several data Mails

  Hi, I'm new to the forum so please excuse the mistakes of beginners.

  I have a Blackberry 8310 and the other day when using the Desktop Manager synchronization message came

  "Verification of updates of device applications.  Please wait... »

  But the office just froze.  After repeated re - try I uninstalled Desktop Manager, downloaded version 4.6 and installed.  Unfortunately when you browse through the installation I checked the box to wrong server (I should have checked one in low re Internet Server) and since then I was inundated by hundreds of emails from data, as well as the update is always freezing.  I've uninstalled and reinstalled twice (manufacturing make sure you tick the box on the right server) but still no luck.  So I have two problems

  (1) why the update freezes the Desktop Manager and

  (2) how to stop countless emails?  I saw an answer about uninstalling it and using the BIS option, but I did not understand what it means.

  Thank you!

  Hello again,

  Now, I tried your suggestion, but when I try to change the settings I get the error report in a temporary folder configuration file is missing.  Instead, I uninstalled and reinstalled the desktop software, taking care to check the BIS option, but still I get multiple emails.

• Desktop of blackBerry Smartphones software update problem

  I have a Torch 9800 and the Desktop Software 6.0 Bundle 2949 version.

  I got a message suggesting that I upgraded to 7.0.0.59 (Bundle 60). However, as soon as the download update is finished, I get the following message

  "Winzip Self Extractor - could not create c\users\owners\app data\RIM - unzip operation cancelled."

  The desktop software will recognize is no longer my phone and cannot synchronize.

  Any suggestions what to do next?

  Thank you very much

  At any time a phone is not recognized by the BlackBerry Desktop Software, I recommend watching this article:

  http://www.BlackBerry.com/BTSC/KB10144

  See if that helps you.

• 7.0 to 7.1 blackBerry Smartphones OS update problems

  Hi - I'm trying to update the operating system on my Blackberry Curve from 7.0 to 7.1. I started at 18:00 last night and 18 hours later still the phone reboot continuously. Any ideas? Should I get out the battery?

  You tried OS update live?

  Now, you need to reinstall your OS device, but you should try a download locally on your PC and update via a USB cable.

• BlackBerry Smartphones Software update problem with new tour

  I got my wife a tour yesterday. When I connected it to my laptop to add music, it says that there is a software update (OS 4.7 and other files). So I updated the device (took about 45 minutes or more). Then I clickd'autant Media Manager to see, I had not installed it yet (I use Media Sync with my Storm). So I installed Media Manager and said to reboot my PC. So I restart and reload the desktop software and low, and here I thought I should do the exact same device update that I had done a few hours ago!

  The unit works fine as far as I can tell. Would it be a bug in the desktop software? A glitch in the OS device? Or should I re - update the tour just to be sure (where he actually has not worked right the first time)?

  If you need more info, let me know what you need.

  OK, well... Sorry, the operating system is not updated. The Tour launched with OS.40 and, last week, Verizon started pushing notificiatons for update of Os.53, so what is updated to the device, the operating system was NOT.

  so... my recommendation - do a full backup in the first place with the Director of office and then allow the upgrade of operating system continue.

• Settings for blackBerry Smartphones Post update: have now double rows of icons on the homescreen instead of a row

  have a PET of brain.  I can't find the setting that will allow me to change the homescreen from 2 lines to 1 row. can anyone help?

  I use aussi.148. If you press the menu key once, you get the screen complete icon. Press it again and the sub menu should appear. There is a choice of options. Press and you should get the preferences of the home screen where you can change the number of lines.

  Once you have done the upgrade, have you done a reset with a battery pull. Try this as well.

• BlackBerry Smartphones device update to v5.0 froze restart the phone

  Hello

  I was upgrading the software of my Blackberry Bold 9000 to v5.0 on my PC using the USB cable and it froze on the stage of "reboot" (he completed the backup, then the installation step), it is said (on the progress of the computer window) it is extended connection to the device, but it has been like that for 4 hours now. The phone is frozen on the screen to start the business, I have not disconnected from PC since it says that doing so can unusable device, and also if something was wrong, I would like to restore my data from the backup of automatic upgrade. Can someone help me?

  Thank you.

  Since the installation process froze and more, simply on restart - I tried rebooting several times-and then I rebooted the phone on the safe mode and woila. Phone has finally worked and finished upgrading (it was still plugged in). Omxter thanks for your reply.

  Problem solved!

• BlackBerry smartphone app update will not be installed. install the old version.

  I am trying to install an update to an app from appworld and I continue to have the old version installed not a new one.

  How can I work around this. BTW, it's a paid app, and the people who got to crackberry have not all wrong.

  BillJ

  I tried to install the app from appworld on my phone app. and it would just reinstall the version on the app that was there. There was an update of the application if you searched FRO the app themselves as the current version, but when I downloaded and tried to install it, it would install the previous version. Hense the post.  In the meantime, I went to appworld on my pc and pulled up to the app and it showed the correct version ther so I dl by using the QR Code the phone installed the old version AGAIN!  It was after several reboots uninstall install ect.  Well the last time I returned to my world on appworld on the phone and here when I clicked on the application, it has shown that an update is available for the version that I had just dl less than 5 min prior. The phone have not installed the new version, he installed former and placed the new in the updated Guide. I ran the update and everything is working normally.

  I've been a beta tester of this app, so I knew how to work the thing. Also I was in corenspondence with the proponent during all of this also. Being that I had also paid for it didn't help my mood when he wasn't working.

  So to summarize all is well in Mudville.

  I guess it could be a bug? I've been known to find things or be the first to find something strange on. It happens fairly regularly to work, just today, I found a.

• BlackBerry Smartphones Hi, am marvie. 1st time on the forum asking for help

  I used the BB 8520 curve before, and now I bought a BB 9300 curve. The problem is that I can't access the BB app with this new phone world. He says that the email I use already exist, I use my old email and password I used while I was still using BB 8520 curve. Please help because I can not get access to the world of the app with my new phone.

  Sandrine says:
  And when I try to create a new ID, it says: an account with this email address already exists. Please use another email address.

  Exactly as expected... you can not create something that already exists.

  Sandrine says:

  When I connect to my existing ID to BB with this new camera he kept then mainly saying: an error has occurred. Please try again later.

  Although not quite right, please see the steps of use listed in this KB:

  • KB25882 "An error has occurred. "Please try again later" is displayed when the user tries to access BlackBerry App World

  In addition, all the voice services work correctly? Voice calls? Voice messages? SMS?

  Are you subscriber, your mobile service provider, to a regime that allows proprietary data BB services? As a general rule, a generic data plan isn't enough... a specific BB plan is necessary.

  Good luck and let us know!

• I am new to Muse, so I am following the tutorial for coffee of Katie.  I downloaded the sample files.  The problem is not that all the files in the folder as in the tutorial.  The color swatch for example is not there.  The updated CC on the road Katies.m

  I am new to Muse, so I am following the tutorial for coffee of Katie.  I downloaded the sample files.  The problem is not that all the files in the folder as in the tutorial.  The color swatch for example is not there.  The CC file to get started Katies.mulib is also not if you can't automatically download all the necessary files.  Can anyone help?

  found in another area

  Where can I find updated cc enroute Katies.mulib file?

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DOM hierarchy will not be saved to the file

  For the experienced:
  
  I try to write a class in java to create an XML using Dom I use JDeveloper 11.1.1.3. The class seems OK to me, update without problem and runs without error. But in the created file contains only one line which is the xml declaration:
  
  < pre >
  & lt;? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >
  < / pre >
  I was expecting the DOM tree must also be saved in the file. but it's not. The source code for the class is added as follows. Can anyone spot the problem?
  
  Thank you very much for help!
  
  
  Newman
  
  
  < pre >
  
  
  
  
  package testing;
  
  import java.io.File;
  
  Import javax.xml.parsers.DocumentBuilder;
  Import javax.xml.parsers.DocumentBuilderFactory;
  Import javax.xml.parsers.ParserConfigurationException;
  
  Import javax.xml.transform.Transformer;
  Import javax.xml.transform.TransformerException;
  Import javax.xml.transform.TransformerFactory;
  
  Import javax.xml.transform.dom.DOMSource;
  
  Import javax.xml.transform.stream.StreamResult;
  
  Import org.w3c.dom.Attr;
  to import org.W3C.DOM.document;
  Import org.w3c.dom.Element;
  
  public class WriteXMLFile {}
  Public Shared Sub main (String [] args) {}
  try {}
  DocFactory DocumentBuilderFactory = DocumentBuilderFactory.newInstance ();
  DocumentBuilder docBuilder = docFactory.newDocumentBuilder ();
  
  root element
  Doc document = docBuilder.newDocument ();
  Element rootElement = doc.createElement ('company');
  doc.appendChild (rootElement);
  
  element of staff
  Element staff = doc.createElement ("Staff");
  rootElement.appendChild (staff);
  
  Set the attribute to the personal element
  Attr attr = doc.createAttribute ("id");
  attr.setValue("1");
  staff.setAttributeNode (attr);
  
  name element
  Element firstname = doc.createElement ("firstname");
  firstname.appendChild (doc.createTextNode ("yong"));
  
  LastName element
  Element lastname = doc.createElement ("lastname");
  lastname.appendChild (doc.createTextNode ("mook kim"));
  staff.appendChild (lastname);
  
  Pseudo element
  Pseudo element = doc.createElement ("nickname");
  nickname.appendChild (doc.createTextNode ("mkyong"));
  staff.appendChild (nickname);
  
  part of salary
  Element salary = doc.createElement ("salary").
  salary.appendChild (doc.createTextNode("100000"));
  staff.appendChild (salary);
  
  write the content in the xml file
  TransformerFactory transformerFactory = TransformerFactory.newInstance ();
  Transformer transformer = transformerFactory.newTransformer ();
  DOMSource source = new DOMSource();
  File outputFile = new File("c:/apps11113/XMLTesting/testing.xml");
  StreamResult result = new StreamResult (outputFile);
  transform. Transform (source, result);
  
  } catch (ParserConfigurationException pce) {}
  pce.printStackTrace ();
  } catch (TransformerException tfe) {}
  tfe.printStackTrace ();
  }
  }
  }
  < / pre >

  Hello

  Can anyone spot the problem?

  Yes, I think:

  DOMSource source = new DOMSource();
  

  Who builds a source empty. Try this instead:

  DOMSource source = new DOMSource(doc);