BlackBerry Smartphones recording stops when the screen fades

Similar Questions

• App background stops when the screen turns off

  I wrote an Android app with a Service that receives events from the LocationService and the accelerometer and always try now to wear 10 BlackBerry. Tests on a Z10 STL100-2 10.1.0.4181

  Once the unit has remained unchanged for some time, the location listener is not registered, in order to save energy, and re-recorded a trip again.

  Don't worry, this can be disabled via the visible activity. But it must continue with the last State (start/stop) after the reboot.

  I even magically figured out how to add additional permissions for the manifest of BAR: "_sys_android_autostart_service" and "run_when_backgrounded".

  But as soon as the screen turns off, my application stops working. No location or accelerometer case being received. Turn on the display again, everything back to normal.

  It is meant to be a question about the accelerometer, but I could not find in the tracker.

  So my questions are:

  -Is it possible to port Android continue to receive events location when the screen is off?

  -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

  -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

  -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

  -Finally, this would be possible with a native application? (I could port the port iOS... lots of fun...)

  Thank you very much for your help!

  PS: If it's of any interest: I use the plugin V1.6.1 Eclipse/ADT to package and install the bar.

  As reported here as well (and I'm sure in other places)

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/accelerometer-turns-off-when-Scre...

  I'm working on a deal in the next version, similar to what we're doing with location requests (in other words, activate us the background mode if your app acquires a partial wake lock).

  Edit:

  So my questions are:

  -Is it possible to port Android continue to receive events location when the screen is off?

  (Yes, but you must hold a wake lock).

  -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

  (For the moment, no, but I'll change that, so it behaves like location.)  Mind you, this could be used to work on old revisions of the software until the native sensors team added a background of sensor mode which is disabled by default and must be explicitly enabled).

  -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

  (There are a lot of thing that matters if your Services happens to run or not, which is not limited to, but includes the number of applications already running and the status of the device memory).

  -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

  (No, it's a native thing.  Your application is already technically without head)

• Music player stopping when the screen is locked

  I have a problem with the music, stopping to play when the screen on my Defy lock.

  He does that you use the speaker or the headphones.

  I never used to do this, and I wonder if I clicked something in the settings of /preferences that makes close the player.

  Any ideas please?

  Thank you

  Richard

  What to do with Advanced Task Killer?

• The music stops when the screen is closed... Help!

  It would not be a big problem, but I would be so happy if you could help me... When I listen to music on my HP Envy x 2 and the screen closes the music stops and the whon can't start until one begins to use I have once again. As it is now, I can't go any further away from my computer if I want to listen to music. I'm sure that there is some sort of setting I need to change but I can't seem to find it by myself. Thanks for your help! Sandra

  Try it to see if that helps

  1. Open the Control Panel.
  2. Click hardware and sound.
  3. Click on power options or change the energy saving settings.
  4. Click on thechange when the computer sleeps.  in the left side control panel. If you want the computer do not go to standby mode or turn off the screen, select never.

  You can even find in the link

  http://www.computerhope.com/issues/ch000338.htm

• BlackBerry Smartphones phone crashes when the media card is on the phone

  I had my phone for a few weeks.  I have a 4 GB card that I had in my phone for over a week.  Now it freezes up when the card is in the phone.  Once I take the card the phone works very well.  Any ideas of what I could in fact?

  I had not upgraded the operating system, but I had added a photo that must have been great.  I took the card on the phone and removed the photo on the card in the Desktop Manager.  When I put the card in the phone it seems to work fine now.

  Thank you

• BlackBerry smartphones any idea when the store will be available again

  I wonder if anyone knows how long it will take for the store of BlackBerry (http://shopblackberry.com) to be available again? Does anyone know what's taking so long? It will be available again after January 30?

  I have some reward points available (https://developer.blackberry.com/jam/rewards/), these are valid in the BlackBerry store.

  On the site it says that I could post in support of the BlackBerry store if I have questions. I've done it since long (4 December 2012 to be exact) and the only response I got was the same as what the site says: "the site is temporarily unavailable. But the part 'temporarily' is at the same time quite a long time.

  PS: I didn't know really where I should put this post. So I guess that moderators will probably move this if it belongs here. Sorry for the inconvenience, but as I found that there is not a real support for the BlackBerry shop channel.

  ndsmyter wrote:

  Not belonging to the RIM?
  He headed the http://us.blackberry.com/where-to-buy/accessories/shop-blackberry.html site which is the property of RIM as far as I know. And because the notification (indicating that it is not available) says to contact [email protected]. I think the address shopblackberry.com is the property of RIM? Or am I missing something?

  I hope for the party revamping of course :-) We'll see in a few days

  Well, let me remind that... He didn't was NOT owned by RIM in the past.

  Site Web ShopBlackBerry.com and retailer was (in the past) a third-party provider of accessories RIM and others, and has been the preferred supplier of RIM. But it was an American company, unrelated to the RIM other than by RIM's official recognition as the "official dealer.

  Since November of last fall (2012) their site has been closed, as well as a notice of "makeover." Maybe RIM has supported or bought this URL and the distribution channel.

• Email from blackBerry Smartphones has stopped and the icon at the top

  Somehow, somehow my phone became not connected to the mobile network.  I noticed it because I stopped doing e-mails from my 2 accounts.  So I reconnected it, and I don't seem to receive emails again.  There is also a small oval blue icon vertical at the top right under the bar signal and next to the icon, he says 1xev.  I don't think I've seen this before and am wondering two things... How do I diagnose the situation by e-mail and this icon has something to do with anything either?

  Thank you all.

  Here are a couple of things to try.

  First things first, start with a basic battery pull, just in case (it is the best way to solve most of the problems).  Open the back, remove the battery for about 15-30 seconds, plug the battery back and let the phone restarts.  Then see if it works.  If this is not the case, proceed to the next step.

  Then, go to Options (the icon) > Mobile network and check to make sure that the network selection Mode is set to automatic and that network technology is set to 1XEV.  In some cases, it can go to Global, which can cause problems (when I went to Global, my signal went from 1XEV to 1xev - I went back and I had full signal within 20 seconds).

  Then, re - register your phone on the BlackBerry network - go to Options > Advanced Options > host Routing Table and press the BB menu button and select Save now.  Final step is to return your Service books.  If you have access to your BIS account, go to settings > e-mail settings.  Sign in to your account, press the BB menu button and select this option to send Service directories.  If you do not have this capability, call your carrier and ask them to do it for you, or if you are on a BES network, ask your BES administrator.

  This should get you operational, but if not, let know us.  And if this does not work, let us know what worked not for future reference!  Good luck!

  As for the vertical blue icon, is there something a and B in there?  If so, this is the bluetooth icon.  You can disable this option via the icon manage networks.

• Recording stops when the alt - tab to another program (win7 64 bit)

  I've recently updated to Audition 3.0 so I could use Audition on my new Win7 64-bit configuration.

  Everything seems to work quite well except...

  When registering, if I leave the hearing program (for example, to use my browser while making a recording) recording immediately stops.

  Anyone encountered this?

  Is there a setting some part that I forgot?

  I'm sure that's not the way it should work - Win XP & hearing 1.1 worked well while multitasking.

  Appreciated by the suggestion.  Thanks in advance.

  Change-> setup of Audio material

  Uncheck 'Release ASIO Driver in the background'

• Features for 2 blackBerry Smartphones have appeared under the screen

  I had the phone for about 2 weeks and now 2 thin lines of about half a centimeter and centimeter quarter appeared side by side on my screen. They are not surface scratches, and I have not dropped the phone at any time. The eBay seller is unwilling to learn, and I have no paper guarantee provided with the phone. Just contact Blackberry UK?

  Hello

  To answer your question... is not likely. RIM services no guarantee (or anything else, for that matter) directly. On the contrary, authorized dealers are 100% responsible for all support of the guarantee. If your eBay seller was not an authorized dealer, then it is most likely that you have actually no guarantee. However, some research by you on this page may be useful:

  • http://us.BlackBerry.com/legal/handheld_warranty.jsp

  Good luck!

• BlackBerry Smartphones new icon on the screen

  Hi all

  recently, I noticed a new icon/symbol on my screen when I have a call in progress. I have never seen this.  He appears in the upper right of the current call screen and looks like a rectangle with 5 points of diagnal inside the rectangle.  any ideas?  I tried to understand.  I'm stuck. Help!

  Looks like you have the opportunity to improve call lit. Check that, by going to your phone icon, click the menu button and go in the Options. From there, go to the General Options. See if you have the choice, called "enhance call Audio ' or ' enhance headset call Audio. If so, change the settings to normal.

• BlackBerry Smartphones Getting fatal when the device 4.5 software update

  Hello

  I have a BB 8800 and I wanted to update the device software to the last v4.5 as mentioned on the website of blackberry. So, I downloaded 8800M_PBr4.5.0_rel108_PL2.7.0.78_A4.5.0.81_Rogers.exe and used the last office v4.7 to install it. The process went well until near the end, he has made a fatal error with no specific error code or message and after that my camera did nothing about it. It shows just a screen white with code 507 or 561.

  I could get by installing Desktop Manager v4.3. and by following the instructions here:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  I don't know if the USB power management was the cause, but I could go.

  See you soon.

• RefNum of event recording stops when the new event added

  I use dynamic registration of events to manage my user interface events in an another VI.  Whenever I have add a new event, the event registration refnum breaks and me have to recursively go through the code and replace all occurrences.  Is there a method of transmitting refnums record event so that it does not happen?  It should be a strict type def?

  Right-click on the wire on the record node, select Create indicator.

  On the Panel before, do a right-click on the reference control, select-> Advanced-> customize. A control editor will appear, select in the top bar on the ring 'Typedef' instead of 'Control '. Register the control.

  Now, in each VI, you use the reference, you need to replace the control. Check the Help window for each wire if it is bound to the control typedef.

  Now, to see if it worked, change your registration, everything must be interrupted.

  Create a control (of new ref) and replace the old typedef control (.ctl file) with new reference control. Automagically everything should be updated and working again.

  Tone

• BlackBerry Smartphones green LED when the load

  Hi all

  I wonder if you can help me, I charge my phone in its cradle every night in the bedroom. I had to turn in bedside mode when charging. Problem is that if I keep the phone then I get notification sounds when you receive emails etc. If I turn off the phone and docked I get the Green solid light that lights up the room when completely loaded. So any info on the following:

  1. disable the Green LED when loading?

  2. can I configure bedside mode to enter in silence?

  3. can I plan a silent mode to switch at some point?

  Thanks in advance

  Creeky

  I have my bedside mode configured to turn off the wireless radio. In this way, I don't get the emails until I turn radio wireless (at the exit of the bedside mode).

  Another thing to do, is do not use the charging base, but using the cable plug and return your phone so that the light is directed downwards and not upwards.

• BlackBerry Smartphones new icon on the screen circle - yellow with white lines with a 1 next to it - what is it please?

  Hello.

  News to hear so please bear with me...

  I had my blackberry for about a month and a new icon has appeared (alongside the message icon where normally). It shows a '1' next to a yellow circle with white lines through it... I have the feeling that it's to do with e-mail, but don't know what it is or how to get rid of it... I have no new messages to read...

  your help would be much appreicated.

  Concerning
  Sutton237

  Check your browser or WAP push messages.

  Messages folder > Options > folders, and then search for in your WAP push and push browser files.

  Read and erase the message.

• Symbol of the new blackBerry Smartphones Message stays on the screen, even if I don't have new messages HELP!

  Can someone help me, I the new symbol of massage telling me I have two new SMS messages, yet, I don't have anything new in my inbox at all, how can I get rid of the symbol it's starting to really annoy me!

  Hi, thanks for your response. Still no luck to get rid of it, have deleted ALL my messages, checked my call log and the * bleep * thing is still showing as unread messages 2! SO ANNOYING!