BlackBerry Smartphones retro lighting keyboard turn on and off by itself

Similar Questions

• BlackBerry Smartphones Can I really turn this thing off?

  I'm puzzled.  I can turn off my 8900 by holding down the power button.  Or I can go into the menu and choose Disable Power and he says: "Handheld Turning Off, Press Any Key to Abort."  As I understand it, which is truly off the phone, by contrast with the right locking.

  But all I have to do is press the power button (for example, the red button "hang up") and the phone turns on again immediately.  I get the T-Mobile logo for a second or two, then I go straight to my home page.  So it does not appear that he is really off.  First of all, I got on the phone and it works, it took 30 seconds or so to start completely.  It seems like it should do it now, too.

  If I turn the phone off, I want it to be OFF.  I don't want to come back if one of the big buttons is tapped lightly.  I want him to stay off until I have press and hold this button.  If I turn it off ' ", and put it in my pocket, he could come back and sound when I don't want it.  So, I want to be sure that the phone is really off and it will stay like that.

  Is this possible?  I'm just doing something wrong?

  Thanks for any help!

  There is no other options beside it. It comes default BlackBerry. When you press the RED button, you should get two options. If you choose full power off, then your phone will fill out mode. Now, if you put your phone in a case then there is no option to power on automatically.

• Re: Satellite L750D - touchpad turns on and off by itself

  Hello

  I have two cell phones L750d one of them works fine but the other is the touchpad with disable and enable himself every second or so, tried touchpad update drivers, tried to take out the battery and pressing the power on button for 30 seconds and a few other options that people talk in the forums. So far, nothing has worked and the touchpad can still turn itself on and off itself.

  Any help at all will be greatly appreciated as it is driving my crazy wife and she is constantly using my laptop which is driving me crazy.

  You can completely disable using FN + F8 key combination?
  Are you using the original pre-installed OS that you got with your laptop?

• OptiPlex 790 turns on and off by itself randomly

  It does not follow a pattern, just randomly, but it turns on or off as if the button is pressed.

  I tried to remove all the wires, cleaned the whole PC and gently touch the power button or attempted to verify if shaking her PC will make the question (like a wire making short films, but this only makes the problem), but it keeps 'touch' power by itself (is not a forced shutdown, as Windows shuts down as when you press the power button).

  I don't know how to remove the power button, and I'll try to turn on the PC and a little thread of the motherboard power button or delete during startup (Yes, he died while the BIOS is booting).

  Thanks Lynda, I found as the power button (the cord or the plug, I'm not exactly) is the problem, I set up Windows and do nothing when it is pressed to keep it, but I have to unplug the power adapter for let not the PC turn itself, I will consider how to fix the button/wire/plug.

  Thank you very much once again for your support again :)

• BlackBerry smartphone email password update, turn round and round in circles

  I used an e-mail account on my blackberry for almost a year now.  Today the blackberry ceased to receive emails on this account and I received an email from blackberry telling me to update the password for this e-mail account.  I followed the instructions in the email to blackberry. But it does not recognize the password I put in that.  When I click on "forgotten password", I get a message saying that my password has been sent to my device.  But no password can't.

  My other e-mail account on my device seems to work very well.

  Hi all and welcome to the forums.

  This can be corrected simply by going to the site of BIS, and reinsert your correct password.

  This article explains.

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB05255&sliceId=2&docTy...

• How can I get the keyboard to turn on and off my TravelMate s 645?

  Sometimes when I turn on my computer, the keyboard light is on, and I need it to be.  Other times, the light turns off and it would be really useful to have on.  I was not able to understand how to enable or disable the light on the keyboard. Please help if you can. Thank you!

  Hello

  You can activate the backlit keyboard power on and off by pressing [Fn] + [F9]:

  

• Computer not start, screen black, I have to turn on and off several times (I have Vista)

  When I turn on the computer, you hear the sound that is running, but I get a black screen with a white underscore on the upper left. Click on keyboard and nothing happened. I must turn on and off several times and then I get the Windows Vista logo.

  If the 2 methods below do not work, you may have to reinstall Vista:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Loading with interruptions, screen turns on and off

  I always put my phone in silent mode and plug it in before going to bed. I noticed it turns the screen several times during loading. I can't that assume this is caused by the brief on the charger, the screen always turns when the phone is connected.

  When the battery is almost full, it often becomes extreme the screen starts to turn on and off quickly. This morning, I took a screenshot of the use of the battery before disconnecting. It shows a decrease in the rate of load to 100%, indicating my phone set on another light show.

  I tried two different Chargers, (one came with the Z3C we speak, the other with my Xperia V) a magnetic cable and mini-usb ordinary and even three Sockets different. Problem persists.

  While I do not notice an impact on the performance of my farm, I'm afraid that it will destroy my battery finally. My phone is only six weeks old. Someone at - he seen this before? Any ideas to fix this?

  

  Hey guys,.

  I finally thought to it: it turns out that a clock plugged into another outlet in the same room was the cause of the problem.

  I hope that my battery was not too suffer from these sessions of loading bumpy.

• TE2000 - screen turns on and off quickly

  Hi all

  My TE2000 was wrong flashing. The screen turns on and off quickly, sometimes every second quarter or so, it seems, so bad that I can hardly read the display. It's like someone is pressing the lid-switch very quickly.

  It happens sporadically. Sometimes it won't happen for a few minutes. Other times it flashes just once or twice, and still other times, it becomes unbearable and continues for minutes at a time.

  Someone has an idea of what could be the cause? I looked into the screens of replacement on e - bay and cannot find a lot...

  Hello

  Have you tried to check if this problem also appears on external monitor?
  Not? Try to do that! If it doesn't appear that on the screen TFT internal display then it s not a graphics chip malfunction but display or a failure of inverter FL.

  Looking for a second hand TFT screen?
  It seems that the laptop TE2000 supports a 14.1 "1024 x 768 TFT color screen
  Therefore, you can use each view of each laptop that supports the 14.1 screen size

  Good luck

• WiFi starts to turn on and off

  Every 15 minutes, my wireless starts to turn on and off repeatedly at a fast rate. I mean, it turns off and then over time offshore on a second and repeat this until I put the computer to sleep, then wake it back up. It of really annoying and makes the difficult to use computer.

  I have a mid-2012 13 "MBP El Capitan running.

  Here is a tutorial that can help.  http://www.switchingtomac.com/tutorials/OSX/MacBook-Pro-constantly-dropping-wire less-con You can also go to/network/advanced/airport system preferences and delete networks that you no longer use. Or swipe your preferred network in the upper slot. Make sure Remember networks this computer joined, is checked. Or you can remove and re-add your network. Reset router by unplugging for 10 seconds then restart him. Make sure the firmware on the router is up-to-date.

• structure of the event to turn on and off a LED

  Good afternoon

  I would like to activate a part of my algorithm according to the value in another part. To make it easier, I symbolize the value by a button and tried a structure of user event to turn on or turn off an LED located in another while loop.

  I can turn on the LED, but unfortunately I can't spend off of the LED thereafter.

  It is possible to change the structure of the event and select the option "change value". However, I would like the fatest way to turn on and off using the structure of the event and the Bay. I mean I would like activate a part of the algorithm only if the button is enabled for not having a continuous audit of the value of the button by the structure of the event.

  Please, if anyone has an idea to turn off the LED (after the switch on), add a comment without hesitation.

  I will be happy to solve this simple problem.

  Thanks in advance for your help.

  Ragards

  You have a race condition.

  When you click stop, it's a race about whether if the event gets not saved and destroyed by the removal of the stem all loop against sending the same user in the lower loop.

  Why it only seems to happen with the case of false must be a quirk of how the code is compiled and the order, it is run.

  If you put a step between your Boolean switch and LED, for me anyway, the error is now generated on the true case of the structure of matter (always false for switch.).

  If you put a constant error in the lower loop and wire while guaranteeing the Unregister event so that you now it does not run until the two while loops are arrested, then I don't see a mistake regardless of the value of the Boolean switch when you click stop.

• I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

  If you date something on it so that it remains not.

  I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  Hey Roscoe,

  If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

  For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

  I hope this helps.

  Good luck!

• Hi, I need touch screen turn on and off software for my dv6

  Hi, I need touch screen turn on and off software for my dv6

  You can find all the software, drivers, information available for your model by using the link at the top of this page titled 'Support & Drivers'.

• Incessant turning on and off between machines?

  I use Production Premium 5.5 at work and now I need to work often at home. I understand that my license allows installation on two computers that I am the primary user of and the two computers cannot run the software at a time.

  That I need to turn off Production Premium and everything is modules each afternoon so I can use it at home and then turn on and off every night at home so I can use the next day at work? Or includes the software, via an internet connection, I guess, that the other licensed computer does not use the software at the moment which allows me to use it without the mess of constantly activation / deactivation twice a day?

  You do not have to disable the facility any circumstance other than wanting to install and activate it on another computer.

• BlackBerry Smartphones Blackberry Bold 9700 won't turn on and keeps restarting!

  I only got my Blackberry "BOLD" for about 2 months. The camera was a little funny and don't zoom so I turned my phone off and took out the battery and succeeded him in an attempt to restart the phone. Now, it won't turn!

  When the battery is in the light of the red LED at the top right corner turns on then turns off when the phone starts showing the BLACKBERRY Logo on the screen with the loading bar under. The bar then shows it to load, but almost immediately, it freezes and turns off. She does several times, but I tried to remove and replace the battery several times.

  I'm sure that this is not a problem with the battery, I had only he alleged the night previous and even tried using another battery of my friends BlackBerry to check, but the continuous phone to turn on several occasions, crash, turn off.

  Anyone have a similar problem or know a solution? Thank you!

  Hey guys!

  I managed to fix my blackberry!

  The best and probably the only solution for a blackberry caught in a never-ending cycle of reset / or always show error messages is to perform a "Clean Reload of your Blackberry Device Software"!

  I found 2 websites more useful!

  This site is by Blackberry from Research in Motion themselves who teaches you how to perform a clean reload. It requires for you to have your cable USB Blackberry and Blackberry Manager installed on your computer. There is a clear process of no to no! However, there are some which confused me at first so just to clarify... in step 4 where they ask allows you to check that you don't have the latest version of the software installed... If your software device tab is empty as indicated in step 3, this means that you currently no. SOFTWARE INSTALLED and so should follow the link indicated in step 4 (or pasted below) to download (and install) the latest software for your blackberry phone model and service provider before performing a cleaning charge.

  For a clean reload:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11320

  To download the latest version of the device software:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB12532

  NOTE: When you do a clean refill, you can see that the Blackberry Manager to first show your blackberry as "disconnected." If the Manager continues to install/reload the software for device on your blackberry with no complications, I wouldn't worry too much about not because once the own recharge is over and your device will restart the Blackberry Manager would show so your device as "connected."

  ------------------------------------------------------------------------------------------------------------------------------------------

  The second site (unofficial Blackberry Forum) basically explains / uses the same process but it is a little outdated and I found some differences in the Blackberry Manager software they use and some steps may no longer apply. However, it should be that if you find you have difficulty getting your BlackBerry connected to your Office Manager as constant rebooting CAN cause the device to connect and disconnect continuously, this site can be useful for more of this problem. I personally don't have this problem if I had expected, which can be a result of the latest models of Blackberry devices and software device etc.

  For more of the constant connecting and disconnecting your BlackBerry since the Blackberry Desktop Manager:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Hope this helps!  x