BlackBerry Smartphones zoom in mode camera

Similar Questions

• Message from blackBerry Smartphones: MTP Device Mode is enabled on

  I just did a hard reset (remove battery) on my Storm2 9550.  When it finished start, I started the Desktop software and connected the phone via the USB port.  I received the following message:

  This Blackberry device using a connection of the PSG.  Some features of media for your device mass storage mode, which interrupts all active media transfer protocol (MTP) connections.  You want to mass storage mode?

  I don't know exactly what that means or if I should answer 'Yes' or 'no '.  (I had a bit of luck you are looking for this particular online message).

  The BlackBerry Storm smartphone can connect to a computer in one of the following ways:

  • USB mass storage mode
  • Media Transfer Protocol (MTP)

  MTP allows a BlackBerry smartphone user transfer media files between a computer and a BlackBerry smartphone and provides support for multimedia files that have specific requirements, such as restrictions associated with the management of digital rights (DRM) technologies.

  A BlackBerry smartphone appears as a Portable device in my computer when connected to the computer using the PSG. It does not appear in the devices with removable storage section and has not assigned a drive letter.

• BlackBerry Smartphones black berry whistle camera priv

  Simply choose a blackberry yesterday priv and the camera has an alarm? is it possible to fix this or do I have to take this back?

  No, this is not normal and it has been reported by many other users (not all devices that do).

  I hope that BlackBerry is reponding to users who have this issue with the official support.

  @onetrooper94

  Call the support number in the box in which you received your private and report the problem.

• The blackBerry Smartphone ZOOM on Trackpad function when you use the camera no longer works. Help

  I can't zoom in when using trackpad, and Volume up/down, Buttom 3 and 9 can also.  I am able to ZOOM when I bought it first, but then, after that, I can zoom 1 x 2 x more after 1 month of use.  Can someone advise how I can configure return the ZOOm feature.  I tried all the OPTIONs field and still can not.  Thank you

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  IF you have problems with several buttons/trackpad, then, this looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• BlackBerry Smartphones in sleep mode no longer works since the update to v5.0.0.1036 & keyboard lock works differently

  Hi all

  Hope you are able to help me with my problem

  I updated my Blackberry Curve 8900 over the weekend to

  v5.0.0.1036(Platform 5.2.0.104) provider is Vodafone.de

  This update was offered when connecting my device to BlackBerry Desktop Application.

  After this update is completed successfully, I discovered the problem the upper top right (usually used for mute) button does not send my camera in standby mode more when you press more than 3 seconds.

  This feature worked perfectly before this update. Unfortunately, I didn't know what version I was before, but as I do updates on more than less regular basis, I guess it was available previously.

  With this problem, I discovered something that works as different as before.

  When I press on the locking of the keyboard (upper left top button) button the lock is now enabled directly and

  the screen goes black. Before this update took place the owner details appeared when pressing this button and the display dims after the set time turns off.

  The details of the owner are correctly added and appear when you go to properties-owner.

  I made a secure deletion (security options - remove security) unit and started from scratch twice already, but the problem remains the same.

  Is it possible to get at least the day before running again.

  I m using a case-mate case with built in battery I want to reboot my BB when no plug is available. Unfortunately, it doesn't have a magnet which send the device to sleep automatically when plugged in the case, so this manual standby option is important for me to

  extend the life of the battery.

  Forward to your response.

  Thanks in advance.

  Kind regards

  Agent of

  Of course, you can ask that... the most effective thing would be to go through your service provider for their support and to make this request. RIM/BlackBerry will listen to the questions and some of them (I think) much more than a user, that the carrier has more weight and shoot.

  I'll add that... This change in characteristics were made from last March, in ALL the operating systems for all devices... and has been included in all since. And then that there was much complaining about this function since then and during that period it have upgraded the OS in all areas, I don't think he'll change - in the next version for sure, or after. There's a reason any, they did this step in this direction.

  But the call of your carrier is the best way to make your voice heard, I think.

• BlackBerry Smartphones stand-alone mode

  Is there a stand-alone for the BlackBerry 8330 mode so I can listen to music or play video games while plane?  It allows the unit to be on, but calls or e-mails aren't coming through.

  Welcome to the forums.

  Yes, you can simply turn off the wireless.  Click on icon to manage the connections, then click on disable all connections.

  When you land, go back and click on enable all connections on.

• BlackBerry Smartphones BB Curve 8330 camera indicators survey

  My Blackberry Curve 8330: there are "200 +" on the lower left side of the screen of the device. With the occasional ' 200 +!  Can someone tell me what this means? Any help is appreciated to gratly.

  -HE'S

  Welcme to Frums!

  I found this on another forum. I quote from it.

  "The camera Help file says. In the device, if the viewfinder does not occupy the full screen, the approximate number of pictures that you can save appears in the lower left corner of the screen

  Its how many photos you can take. The card just shows 200 + until it becomes weak and it may contain only less than 200.

  BB 8300 can hold about 30. You can test they buy going to your cameras settings and change the photos of store definition from on multimedia card in the device memory. "

• BlackBerry Smartphones zoom in and Zoom back in pearl 8100 problem

  Hello

  I use BB 8100 pearl.while using my camera I'm lying for zoom and Zoom out.

  I tried to zoom in and zoom out using the Trackball and keys Volume, but it does not work.

  someone can help me.

  Kind regards

  Harry

  Thanks jhon it works now.

• BlackBerry Smartphones zooms is more inside or outside.

  I have an at & t 8320 curve.  I was always able to zoom in/out with my camera by scrolling through the trackball, but all of a sudden, I'm more able to do it.  There is no problem with my scrollball, because it works with other applications.  any ideas?  I changed a setting somewhere oversight along the way?  Thank you.

  try to remove the battery while the phone is turned on, then replace it after 20-30 seconds.  see if it works.

• BlackBerry Smartphones Zoom doesn´t longer works: smileysad:

  Hey guys:

  The zoom option no longer works, the Cam works fine, just no zoom, an a hardware or a software problem?

  Did I not guaranteed for this?

  Thank you

  Hi and welcome to the Forums!

  Whenever random strange behaviors creep, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• BlackBerry Smartphones hearing aid mode on a storm 2

  I use a Bold 9700 but thought the upgrade of tol a touchscreen Storm 2, but I have a severe hearing problem I use hearing device on my current phone mode.

  The Storm 2 has this option?

  Dave Hobely

  Thank you so much for all your help, I guess it's like the Blackberry have not understood the value of this parameter.

  Dave

• BlackBerry Smartphones mass storage mode does not, help!

  so I have my micro SD card in my bb, I have the mass storage mode on, the card holder, compression enabled and auto enable mass storage mode when connected so that a prompt. I downloaded blackberry Desktop Manager to put videos and music on it and like, but when I select the music category in the bb desktop it says I need to activate via the connected device mass storage mode. I activated, I formatted it, I fixed it, all combinations of the four choices on the options of memory on my phone. I also chose enable usb peripheral storage mass on my phone when its plugged in, but it says that my card device and media are already in use.

  I also put media card in my MMC/SD slot on my computer and nothing comes up as a storage device or anything. No removable disk found for him. the light comes on, as she recorded the card but it's not come as what it is on my computer.

  help would be appreciated,

  Josh.

  Hey cloud9n,

  Welcome to the community of BlackBerry Support Forums.

  What BlackBerry do you currently use?

  Also have you tried going through all the steps described in this article? www.blackberry.com/btsc/KB19717

  What version of Windows you are currently using as well?

  I look forward to your reply.

• BlackBerry smartphones yet another bug - camera records incorrectly in memory at the launch of the lockscreen

  How to reproduce (and Yes, that's with the software of camera bb last updated from the game store):

  (1) to unlock the phone, insert the SD card, tell app camera to record pictures on SD card.

  (2) since the pitcher, after that phone is unlocked, start the camera application and take a picture. Use a file Explorer (I use ES File Explorer), and you will see that the picture has been saved correctly on/storage/sdcard1/DCIM/camera.

  (3) turn off the screen, then restarts.  Instead of dragging up to unlock, swipe to the left on the lower right camera icon to launch the camera directly.  Take a picture.  Using a file Explorer (or the details of a gallery app), you will see that the picture has been saved to/storage/emulated/0/DCIM/camera /, which is the memory internally.

  This phone is so buggy-with this, the keyboard double letter dropping and lag, overheating General and fast battery slide during use... on top AT & T startup sound, I can not turn off even muted, and "AT & T" shout his name in my face on the top bar each time notification I unlock the phone on my unlocked phone... I'm almost ready to return the phone and get back to my loyal Passport SE.

  .. new good .and!  This is a bug we have set and will be available in the next update on the Google game.

• BlackBerry Smartphones mass storage mode

  Where on my BB Torch mass storage Mode?

  When you are on this screen, press the BB menu button and another menu should appear with the feature activate.

  Anyway, when you connect the device to the computer, you should get three options, which one is the Mode of USB storage.  What to choose, and then the options of WIndows for the USB storage should appear.  At this time, you can open the folders on your device, then drag and drop what you want folders on your PC the files on your device.

• BlackBerry Smartphones the "BOLD" mode standby.

  So I just found out that put my BB "BOLD" in the case puts the phone in standby mode and saves the life of the battery (it is fine... I threw my case the first day because I carry the phone in my Pocket ).

  My question is this: if I play with the phone and I leave, the screen is blank.  If I launch AutoStandby (an application. I bought that puts the phone in standby mode), the screen is also blank, but it is in standby.  What is the difference between the two?

  In standby mode when the backlight turns off, it is an option of saving the phone performs to save batt - if you choose to put the phone in standby mode, it minimizes the energy of the signal, data transfer, lighting and many other "behind the scenes-' operations..."

  I hope that helped!